linux/drivers/net/qlge/qlge_mpi.c
David S. Miller 9cbc1cb8cd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/scsi/fcoe/fcoe.c
	net/core/drop_monitor.c
	net/core/net-traces.c
2009-06-15 03:02:23 -07:00

900 lines
21 KiB
C

#include "qlge.h"
static void ql_display_mb_sts(struct ql_adapter *qdev,
struct mbox_params *mbcp)
{
int i;
static char *err_sts[] = {
"Command Complete",
"Command Not Supported",
"Host Interface Error",
"Checksum Error",
"Unused Completion Status",
"Test Failed",
"Command Parameter Error"};
QPRINTK(qdev, DRV, DEBUG, "%s.\n",
err_sts[mbcp->mbox_out[0] & 0x0000000f]);
for (i = 0; i < mbcp->out_count; i++)
QPRINTK(qdev, DRV, DEBUG, "mbox_out[%d] = 0x%.08x.\n",
i, mbcp->mbox_out[i]);
}
int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data)
{
int status;
/* wait for reg to come ready */
status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR);
if (status)
goto exit;
/* set up for reg read */
ql_write32(qdev, PROC_ADDR, reg | PROC_ADDR_R);
/* wait for reg to come ready */
status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR);
if (status)
goto exit;
/* get the data */
*data = ql_read32(qdev, PROC_DATA);
exit:
return status;
}
int ql_write_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 data)
{
int status = 0;
/* wait for reg to come ready */
status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR);
if (status)
goto exit;
/* write the data to the data reg */
ql_write32(qdev, PROC_DATA, data);
/* trigger the write */
ql_write32(qdev, PROC_ADDR, reg);
/* wait for reg to come ready */
status = ql_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR);
if (status)
goto exit;
exit:
return status;
}
int ql_soft_reset_mpi_risc(struct ql_adapter *qdev)
{
int status;
status = ql_write_mpi_reg(qdev, 0x00001010, 1);
return status;
}
static int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
int i, status;
status = ql_sem_spinlock(qdev, SEM_PROC_REG_MASK);
if (status)
return -EBUSY;
for (i = 0; i < mbcp->out_count; i++) {
status =
ql_read_mpi_reg(qdev, qdev->mailbox_out + i,
&mbcp->mbox_out[i]);
if (status) {
QPRINTK(qdev, DRV, ERR, "Failed mailbox read.\n");
break;
}
}
ql_sem_unlock(qdev, SEM_PROC_REG_MASK); /* does flush too */
return status;
}
/* Wait for a single mailbox command to complete.
* Returns zero on success.
*/
static int ql_wait_mbx_cmd_cmplt(struct ql_adapter *qdev)
{
int count = 100;
u32 value;
do {
value = ql_read32(qdev, STS);
if (value & STS_PI)
return 0;
mdelay(UDELAY_DELAY); /* 100ms */
} while (--count);
return -ETIMEDOUT;
}
/* Execute a single mailbox command.
* Caller must hold PROC_ADDR semaphore.
*/
static int ql_exec_mb_cmd(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
int i, status;
/*
* Make sure there's nothing pending.
* This shouldn't happen.
*/
if (ql_read32(qdev, CSR) & CSR_HRI)
return -EIO;
status = ql_sem_spinlock(qdev, SEM_PROC_REG_MASK);
if (status)
return status;
/*
* Fill the outbound mailboxes.
*/
for (i = 0; i < mbcp->in_count; i++) {
status = ql_write_mpi_reg(qdev, qdev->mailbox_in + i,
mbcp->mbox_in[i]);
if (status)
goto end;
}
/*
* Wake up the MPI firmware.
*/
ql_write32(qdev, CSR, CSR_CMD_SET_H2R_INT);
end:
ql_sem_unlock(qdev, SEM_PROC_REG_MASK);
return status;
}
/* We are being asked by firmware to accept
* a change to the port. This is only
* a change to max frame sizes (Tx/Rx), pause
* parameters, or loopback mode. We wake up a worker
* to handler processing this since a mailbox command
* will need to be sent to ACK the request.
*/
static int ql_idc_req_aen(struct ql_adapter *qdev)
{
int status;
struct mbox_params *mbcp = &qdev->idc_mbc;
QPRINTK(qdev, DRV, ERR, "Enter!\n");
/* Get the status data and start up a thread to
* handle the request.
*/
mbcp = &qdev->idc_mbc;
mbcp->out_count = 4;
status = ql_get_mb_sts(qdev, mbcp);
if (status) {
QPRINTK(qdev, DRV, ERR,
"Could not read MPI, resetting ASIC!\n");
ql_queue_asic_error(qdev);
} else {
/* Begin polled mode early so
* we don't get another interrupt
* when we leave mpi_worker.
*/
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
queue_delayed_work(qdev->workqueue, &qdev->mpi_idc_work, 0);
}
return status;
}
/* Process an inter-device event completion.
* If good, signal the caller's completion.
*/
static int ql_idc_cmplt_aen(struct ql_adapter *qdev)
{
int status;
struct mbox_params *mbcp = &qdev->idc_mbc;
mbcp->out_count = 4;
status = ql_get_mb_sts(qdev, mbcp);
if (status) {
QPRINTK(qdev, DRV, ERR,
"Could not read MPI, resetting RISC!\n");
ql_queue_fw_error(qdev);
} else
/* Wake up the sleeping mpi_idc_work thread that is
* waiting for this event.
*/
complete(&qdev->ide_completion);
return status;
}
static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
int status;
mbcp->out_count = 2;
status = ql_get_mb_sts(qdev, mbcp);
if (status) {
QPRINTK(qdev, DRV, ERR,
"%s: Could not get mailbox status.\n", __func__);
return;
}
qdev->link_status = mbcp->mbox_out[1];
QPRINTK(qdev, DRV, ERR, "Link Up.\n");
/* If we're coming back from an IDC event
* then set up the CAM and frame routing.
*/
if (test_bit(QL_CAM_RT_SET, &qdev->flags)) {
status = ql_cam_route_initialize(qdev);
if (status) {
QPRINTK(qdev, IFUP, ERR,
"Failed to init CAM/Routing tables.\n");
return;
} else
clear_bit(QL_CAM_RT_SET, &qdev->flags);
}
/* Queue up a worker to check the frame
* size information, and fix it if it's not
* to our liking.
*/
if (!test_bit(QL_PORT_CFG, &qdev->flags)) {
QPRINTK(qdev, DRV, ERR, "Queue Port Config Worker!\n");
set_bit(QL_PORT_CFG, &qdev->flags);
/* Begin polled mode early so
* we don't get another interrupt
* when we leave mpi_worker dpc.
*/
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
queue_delayed_work(qdev->workqueue,
&qdev->mpi_port_cfg_work, 0);
}
netif_carrier_on(qdev->ndev);
}
static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
int status;
mbcp->out_count = 3;
status = ql_get_mb_sts(qdev, mbcp);
if (status)
QPRINTK(qdev, DRV, ERR, "Link down AEN broken!\n");
netif_carrier_off(qdev->ndev);
}
static int ql_sfp_in(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
int status;
mbcp->out_count = 5;
status = ql_get_mb_sts(qdev, mbcp);
if (status)
QPRINTK(qdev, DRV, ERR, "SFP in AEN broken!\n");
else
QPRINTK(qdev, DRV, ERR, "SFP insertion detected.\n");
return status;
}
static int ql_sfp_out(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
int status;
mbcp->out_count = 1;
status = ql_get_mb_sts(qdev, mbcp);
if (status)
QPRINTK(qdev, DRV, ERR, "SFP out AEN broken!\n");
else
QPRINTK(qdev, DRV, ERR, "SFP removal detected.\n");
return status;
}
static int ql_aen_lost(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
int status;
mbcp->out_count = 6;
status = ql_get_mb_sts(qdev, mbcp);
if (status)
QPRINTK(qdev, DRV, ERR, "Lost AEN broken!\n");
else {
int i;
QPRINTK(qdev, DRV, ERR, "Lost AEN detected.\n");
for (i = 0; i < mbcp->out_count; i++)
QPRINTK(qdev, DRV, ERR, "mbox_out[%d] = 0x%.08x.\n",
i, mbcp->mbox_out[i]);
}
return status;
}
static void ql_init_fw_done(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
int status;
mbcp->out_count = 2;
status = ql_get_mb_sts(qdev, mbcp);
if (status) {
QPRINTK(qdev, DRV, ERR, "Firmware did not initialize!\n");
} else {
QPRINTK(qdev, DRV, ERR, "Firmware Revision = 0x%.08x.\n",
mbcp->mbox_out[1]);
status = ql_cam_route_initialize(qdev);
if (status)
QPRINTK(qdev, IFUP, ERR,
"Failed to init CAM/Routing tables.\n");
}
}
/* Process an async event and clear it unless it's an
* error condition.
* This can get called iteratively from the mpi_work thread
* when events arrive via an interrupt.
* It also gets called when a mailbox command is polling for
* it's completion. */
static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
int status;
int orig_count = mbcp->out_count;
/* Just get mailbox zero for now. */
mbcp->out_count = 1;
status = ql_get_mb_sts(qdev, mbcp);
if (status) {
QPRINTK(qdev, DRV, ERR,
"Could not read MPI, resetting ASIC!\n");
ql_queue_asic_error(qdev);
goto end;
}
switch (mbcp->mbox_out[0]) {
/* This case is only active when we arrive here
* as a result of issuing a mailbox command to
* the firmware.
*/
case MB_CMD_STS_INTRMDT:
case MB_CMD_STS_GOOD:
case MB_CMD_STS_INVLD_CMD:
case MB_CMD_STS_XFC_ERR:
case MB_CMD_STS_CSUM_ERR:
case MB_CMD_STS_ERR:
case MB_CMD_STS_PARAM_ERR:
/* We can only get mailbox status if we're polling from an
* unfinished command. Get the rest of the status data and
* return back to the caller.
* We only end up here when we're polling for a mailbox
* command completion.
*/
mbcp->out_count = orig_count;
status = ql_get_mb_sts(qdev, mbcp);
return status;
/* We are being asked by firmware to accept
* a change to the port. This is only
* a change to max frame sizes (Tx/Rx), pause
* parameters, or loopback mode.
*/
case AEN_IDC_REQ:
status = ql_idc_req_aen(qdev);
break;
/* Process and inbound IDC event.
* This will happen when we're trying to
* change tx/rx max frame size, change pause
* parameters or loopback mode.
*/
case AEN_IDC_CMPLT:
case AEN_IDC_EXT:
status = ql_idc_cmplt_aen(qdev);
break;
case AEN_LINK_UP:
ql_link_up(qdev, mbcp);
break;
case AEN_LINK_DOWN:
ql_link_down(qdev, mbcp);
break;
case AEN_FW_INIT_DONE:
/* If we're in process on executing the firmware,
* then convert the status to normal mailbox status.
*/
if (mbcp->mbox_in[0] == MB_CMD_EX_FW) {
mbcp->out_count = orig_count;
status = ql_get_mb_sts(qdev, mbcp);
mbcp->mbox_out[0] = MB_CMD_STS_GOOD;
return status;
}
ql_init_fw_done(qdev, mbcp);
break;
case AEN_AEN_SFP_IN:
ql_sfp_in(qdev, mbcp);
break;
case AEN_AEN_SFP_OUT:
ql_sfp_out(qdev, mbcp);
break;
/* This event can arrive at boot time or after an
* MPI reset if the firmware failed to initialize.
*/
case AEN_FW_INIT_FAIL:
/* If we're in process on executing the firmware,
* then convert the status to normal mailbox status.
*/
if (mbcp->mbox_in[0] == MB_CMD_EX_FW) {
mbcp->out_count = orig_count;
status = ql_get_mb_sts(qdev, mbcp);
mbcp->mbox_out[0] = MB_CMD_STS_ERR;
return status;
}
QPRINTK(qdev, DRV, ERR,
"Firmware initialization failed.\n");
status = -EIO;
ql_queue_fw_error(qdev);
break;
case AEN_SYS_ERR:
QPRINTK(qdev, DRV, ERR,
"System Error.\n");
ql_queue_fw_error(qdev);
status = -EIO;
break;
case AEN_AEN_LOST:
ql_aen_lost(qdev, mbcp);
break;
default:
QPRINTK(qdev, DRV, ERR,
"Unsupported AE %.08x.\n", mbcp->mbox_out[0]);
/* Clear the MPI firmware status. */
}
end:
ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
/* Restore the original mailbox count to
* what the caller asked for. This can get
* changed when a mailbox command is waiting
* for a response and an AEN arrives and
* is handled.
* */
mbcp->out_count = orig_count;
return status;
}
/* Execute a single mailbox command.
* mbcp is a pointer to an array of u32. Each
* element in the array contains the value for it's
* respective mailbox register.
*/
static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
int status, count;
mutex_lock(&qdev->mpi_mutex);
/* Begin polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
/* Load the mailbox registers and wake up MPI RISC. */
status = ql_exec_mb_cmd(qdev, mbcp);
if (status)
goto end;
/* If we're generating a system error, then there's nothing
* to wait for.
*/
if (mbcp->mbox_in[0] == MB_CMD_MAKE_SYS_ERR)
goto end;
/* Wait for the command to complete. We loop
* here because some AEN might arrive while
* we're waiting for the mailbox command to
* complete. If more than 5 arrive then we can
* assume something is wrong. */
count = 5;
do {
/* Wait for the interrupt to come in. */
status = ql_wait_mbx_cmd_cmplt(qdev);
if (status)
goto end;
/* Process the event. If it's an AEN, it
* will be handled in-line or a worker
* will be spawned. If it's our completion
* we will catch it below.
*/
status = ql_mpi_handler(qdev, mbcp);
if (status)
goto end;
/* It's either the completion for our mailbox
* command complete or an AEN. If it's our
* completion then get out.
*/
if (((mbcp->mbox_out[0] & 0x0000f000) ==
MB_CMD_STS_GOOD) ||
((mbcp->mbox_out[0] & 0x0000f000) ==
MB_CMD_STS_INTRMDT))
break;
} while (--count);
if (!count) {
QPRINTK(qdev, DRV, ERR,
"Timed out waiting for mailbox complete.\n");
status = -ETIMEDOUT;
goto end;
}
/* Now we can clear the interrupt condition
* and look at our status.
*/
ql_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
if (((mbcp->mbox_out[0] & 0x0000f000) !=
MB_CMD_STS_GOOD) &&
((mbcp->mbox_out[0] & 0x0000f000) !=
MB_CMD_STS_INTRMDT)) {
ql_display_mb_sts(qdev, mbcp);
status = -EIO;
}
end:
mutex_unlock(&qdev->mpi_mutex);
/* End polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
return status;
}
/* Get MPI firmware version. This will be used for
* driver banner and for ethtool info.
* Returns zero on success.
*/
int ql_mb_about_fw(struct ql_adapter *qdev)
{
struct mbox_params mbc;
struct mbox_params *mbcp = &mbc;
int status = 0;
memset(mbcp, 0, sizeof(struct mbox_params));
mbcp->in_count = 1;
mbcp->out_count = 3;
mbcp->mbox_in[0] = MB_CMD_ABOUT_FW;
status = ql_mailbox_command(qdev, mbcp);
if (status)
return status;
if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
QPRINTK(qdev, DRV, ERR,
"Failed about firmware command\n");
status = -EIO;
}
/* Store the firmware version */
qdev->fw_rev_id = mbcp->mbox_out[1];
return status;
}
/* Get functional state for MPI firmware.
* Returns zero on success.
*/
int ql_mb_get_fw_state(struct ql_adapter *qdev)
{
struct mbox_params mbc;
struct mbox_params *mbcp = &mbc;
int status = 0;
memset(mbcp, 0, sizeof(struct mbox_params));
mbcp->in_count = 1;
mbcp->out_count = 2;
mbcp->mbox_in[0] = MB_CMD_GET_FW_STATE;
status = ql_mailbox_command(qdev, mbcp);
if (status)
return status;
if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
QPRINTK(qdev, DRV, ERR,
"Failed Get Firmware State.\n");
status = -EIO;
}
/* If bit zero is set in mbx 1 then the firmware is
* running, but not initialized. This should never
* happen.
*/
if (mbcp->mbox_out[1] & 1) {
QPRINTK(qdev, DRV, ERR,
"Firmware waiting for initialization.\n");
status = -EIO;
}
return status;
}
/* Send and ACK mailbox command to the firmware to
* let it continue with the change.
*/
int ql_mb_idc_ack(struct ql_adapter *qdev)
{
struct mbox_params mbc;
struct mbox_params *mbcp = &mbc;
int status = 0;
memset(mbcp, 0, sizeof(struct mbox_params));
mbcp->in_count = 5;
mbcp->out_count = 1;
mbcp->mbox_in[0] = MB_CMD_IDC_ACK;
mbcp->mbox_in[1] = qdev->idc_mbc.mbox_out[1];
mbcp->mbox_in[2] = qdev->idc_mbc.mbox_out[2];
mbcp->mbox_in[3] = qdev->idc_mbc.mbox_out[3];
mbcp->mbox_in[4] = qdev->idc_mbc.mbox_out[4];
status = ql_mailbox_command(qdev, mbcp);
if (status)
return status;
if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
QPRINTK(qdev, DRV, ERR,
"Failed IDC ACK send.\n");
status = -EIO;
}
return status;
}
/* Get link settings and maximum frame size settings
* for the current port.
* Most likely will block.
*/
static int ql_mb_set_port_cfg(struct ql_adapter *qdev)
{
struct mbox_params mbc;
struct mbox_params *mbcp = &mbc;
int status = 0;
memset(mbcp, 0, sizeof(struct mbox_params));
mbcp->in_count = 3;
mbcp->out_count = 1;
mbcp->mbox_in[0] = MB_CMD_SET_PORT_CFG;
mbcp->mbox_in[1] = qdev->link_config;
mbcp->mbox_in[2] = qdev->max_frame_size;
status = ql_mailbox_command(qdev, mbcp);
if (status)
return status;
if (mbcp->mbox_out[0] == MB_CMD_STS_INTRMDT) {
QPRINTK(qdev, DRV, ERR,
"Port Config sent, wait for IDC.\n");
} else if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
QPRINTK(qdev, DRV, ERR,
"Failed Set Port Configuration.\n");
status = -EIO;
}
return status;
}
/* Get link settings and maximum frame size settings
* for the current port.
* Most likely will block.
*/
static int ql_mb_get_port_cfg(struct ql_adapter *qdev)
{
struct mbox_params mbc;
struct mbox_params *mbcp = &mbc;
int status = 0;
memset(mbcp, 0, sizeof(struct mbox_params));
mbcp->in_count = 1;
mbcp->out_count = 3;
mbcp->mbox_in[0] = MB_CMD_GET_PORT_CFG;
status = ql_mailbox_command(qdev, mbcp);
if (status)
return status;
if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
QPRINTK(qdev, DRV, ERR,
"Failed Get Port Configuration.\n");
status = -EIO;
} else {
QPRINTK(qdev, DRV, DEBUG,
"Passed Get Port Configuration.\n");
qdev->link_config = mbcp->mbox_out[1];
qdev->max_frame_size = mbcp->mbox_out[2];
}
return status;
}
/* IDC - Inter Device Communication...
* Some firmware commands require consent of adjacent FCOE
* function. This function waits for the OK, or a
* counter-request for a little more time.i
* The firmware will complete the request if the other
* function doesn't respond.
*/
static int ql_idc_wait(struct ql_adapter *qdev)
{
int status = -ETIMEDOUT;
long wait_time = 1 * HZ;
struct mbox_params *mbcp = &qdev->idc_mbc;
do {
/* Wait here for the command to complete
* via the IDC process.
*/
wait_time =
wait_for_completion_timeout(&qdev->ide_completion,
wait_time);
if (!wait_time) {
QPRINTK(qdev, DRV, ERR,
"IDC Timeout.\n");
break;
}
/* Now examine the response from the IDC process.
* We might have a good completion or a request for
* more wait time.
*/
if (mbcp->mbox_out[0] == AEN_IDC_EXT) {
QPRINTK(qdev, DRV, ERR,
"IDC Time Extension from function.\n");
wait_time += (mbcp->mbox_out[1] >> 8) & 0x0000000f;
} else if (mbcp->mbox_out[0] == AEN_IDC_CMPLT) {
QPRINTK(qdev, DRV, ERR,
"IDC Success.\n");
status = 0;
break;
} else {
QPRINTK(qdev, DRV, ERR,
"IDC: Invalid State 0x%.04x.\n",
mbcp->mbox_out[0]);
status = -EIO;
break;
}
} while (wait_time);
return status;
}
/* API called in work thread context to set new TX/RX
* maximum frame size values to match MTU.
*/
static int ql_set_port_cfg(struct ql_adapter *qdev)
{
int status;
status = ql_mb_set_port_cfg(qdev);
if (status)
return status;
status = ql_idc_wait(qdev);
return status;
}
/* The following routines are worker threads that process
* events that may sleep waiting for completion.
*/
/* This thread gets the maximum TX and RX frame size values
* from the firmware and, if necessary, changes them to match
* the MTU setting.
*/
void ql_mpi_port_cfg_work(struct work_struct *work)
{
struct ql_adapter *qdev =
container_of(work, struct ql_adapter, mpi_port_cfg_work.work);
int status;
status = ql_mb_get_port_cfg(qdev);
if (status) {
QPRINTK(qdev, DRV, ERR,
"Bug: Failed to get port config data.\n");
goto err;
}
if (qdev->link_config & CFG_JUMBO_FRAME_SIZE &&
qdev->max_frame_size ==
CFG_DEFAULT_MAX_FRAME_SIZE)
goto end;
qdev->link_config |= CFG_JUMBO_FRAME_SIZE;
qdev->max_frame_size = CFG_DEFAULT_MAX_FRAME_SIZE;
status = ql_set_port_cfg(qdev);
if (status) {
QPRINTK(qdev, DRV, ERR,
"Bug: Failed to set port config data.\n");
goto err;
}
end:
clear_bit(QL_PORT_CFG, &qdev->flags);
return;
err:
ql_queue_fw_error(qdev);
goto end;
}
/* Process an inter-device request. This is issues by
* the firmware in response to another function requesting
* a change to the port. We set a flag to indicate a change
* has been made and then send a mailbox command ACKing
* the change request.
*/
void ql_mpi_idc_work(struct work_struct *work)
{
struct ql_adapter *qdev =
container_of(work, struct ql_adapter, mpi_idc_work.work);
int status;
struct mbox_params *mbcp = &qdev->idc_mbc;
u32 aen;
aen = mbcp->mbox_out[1] >> 16;
switch (aen) {
default:
QPRINTK(qdev, DRV, ERR,
"Bug: Unhandled IDC action.\n");
break;
case MB_CMD_PORT_RESET:
case MB_CMD_SET_PORT_CFG:
case MB_CMD_STOP_FW:
netif_carrier_off(qdev->ndev);
/* Signal the resulting link up AEN
* that the frame routing and mac addr
* needs to be set.
* */
set_bit(QL_CAM_RT_SET, &qdev->flags);
status = ql_mb_idc_ack(qdev);
if (status) {
QPRINTK(qdev, DRV, ERR,
"Bug: No pending IDC!\n");
}
}
}
void ql_mpi_work(struct work_struct *work)
{
struct ql_adapter *qdev =
container_of(work, struct ql_adapter, mpi_work.work);
struct mbox_params mbc;
struct mbox_params *mbcp = &mbc;
int err = 0;
mutex_lock(&qdev->mpi_mutex);
while (ql_read32(qdev, STS) & STS_PI) {
memset(mbcp, 0, sizeof(struct mbox_params));
mbcp->out_count = 1;
/* Don't continue if an async event
* did not complete properly.
*/
err = ql_mpi_handler(qdev, mbcp);
if (err)
break;
}
mutex_unlock(&qdev->mpi_mutex);
ql_enable_completion_interrupt(qdev, 0);
}
void ql_mpi_reset_work(struct work_struct *work)
{
struct ql_adapter *qdev =
container_of(work, struct ql_adapter, mpi_reset_work.work);
cancel_delayed_work_sync(&qdev->mpi_work);
cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
cancel_delayed_work_sync(&qdev->mpi_idc_work);
ql_soft_reset_mpi_risc(qdev);
}