linux/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
Jason Gunthorpe 7045ff5a53 ARM: kirkwood: Move the nand node under the mbus node
There should be no nodes that are not children of the mbus. Move
the nand node under the mbus, and rework the board .dts files
to use an & reference to the nand node.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-10-01 16:36:12 +00:00

69 lines
1.1 KiB
Plaintext

/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-98dx4122.dtsi"
/ {
model = "Keymile Kirkwood Reference Design";
compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
pinctrl-names = "default";
pmx_i2c_gpio_sda: pmx-gpio-sda {
marvell,pins = "mpp8";
marvell,function = "gpio";
};
pmx_i2c_gpio_scl: pmx-gpio-scl {
marvell,pins = "mpp9";
marvell,function = "gpio";
};
};
serial@12000 {
status = "ok";
};
};
i2c@0 {
compatible = "i2c-gpio";
gpios = < &gpio0 8 0 /* sda */
&gpio0 9 0 >; /* scl */
i2c-gpio,delay-us = <2>; /* ~100 kHz */
};
};
&nand {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
status = "ok";
chip-delay = <25>;
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};