linux/drivers/target/target_core_ua.c
Nicholas Bellinger c66ac9db8d [SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:

High-performance, non-blocking, multithreaded architecture with SIMD
support.

Advanced SCSI feature set:

    * Persistent Reservations (PRs)
    * Asymmetric Logical Unit Assignment (ALUA)
    * Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
    * Full Error Recovery (ERL=0,1,2)
    * Active/active task migration and session continuation (ERL=2)
    * Thin LUN provisioning (UNMAP and WRITE_SAMExx)

Multiprotocol target plugins

Storage media independence:

    * Virtualization of all storage media; transparent mapping of IO to LUNs
    * No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
    * Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.

Standards compliance:

    * Full compliance with IETF (RFC 3720)
    * Full implementation of SPC-4 PRs and ALUA

Significant code cleanups done by Christoph Hellwig.

[jejb: fix up for new block bdev exclusive interface. Minor fixes from
 Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-14 10:12:29 -06:00

333 lines
9.1 KiB
C

/*******************************************************************************
* Filename: target_core_ua.c
*
* This file contains logic for SPC-3 Unit Attention emulation
*
* Copyright (c) 2009,2010 Rising Tide Systems
* Copyright (c) 2009,2010 Linux-iSCSI.org
*
* Nicholas A. Bellinger <nab@kernel.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
******************************************************************************/
#include <linux/version.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <target/target_core_base.h>
#include <target/target_core_device.h>
#include <target/target_core_transport.h>
#include <target/target_core_fabric_ops.h>
#include <target/target_core_configfs.h>
#include "target_core_alua.h"
#include "target_core_hba.h"
#include "target_core_pr.h"
#include "target_core_ua.h"
int core_scsi3_ua_check(
struct se_cmd *cmd,
unsigned char *cdb)
{
struct se_dev_entry *deve;
struct se_session *sess = cmd->se_sess;
struct se_node_acl *nacl;
if (!(sess))
return 0;
nacl = sess->se_node_acl;
if (!(nacl))
return 0;
deve = &nacl->device_list[cmd->orig_fe_lun];
if (!(atomic_read(&deve->ua_count)))
return 0;
/*
* From sam4r14, section 5.14 Unit attention condition:
*
* a) if an INQUIRY command enters the enabled command state, the
* device server shall process the INQUIRY command and shall neither
* report nor clear any unit attention condition;
* b) if a REPORT LUNS command enters the enabled command state, the
* device server shall process the REPORT LUNS command and shall not
* report any unit attention condition;
* e) if a REQUEST SENSE command enters the enabled command state while
* a unit attention condition exists for the SCSI initiator port
* associated with the I_T nexus on which the REQUEST SENSE command
* was received, then the device server shall process the command
* and either:
*/
switch (cdb[0]) {
case INQUIRY:
case REPORT_LUNS:
case REQUEST_SENSE:
return 0;
default:
return -1;
}
return -1;
}
int core_scsi3_ua_allocate(
struct se_node_acl *nacl,
u32 unpacked_lun,
u8 asc,
u8 ascq)
{
struct se_dev_entry *deve;
struct se_ua *ua, *ua_p, *ua_tmp;
/*
* PASSTHROUGH OPS
*/
if (!(nacl))
return -1;
ua = kmem_cache_zalloc(se_ua_cache, GFP_ATOMIC);
if (!(ua)) {
printk(KERN_ERR "Unable to allocate struct se_ua\n");
return -1;
}
INIT_LIST_HEAD(&ua->ua_dev_list);
INIT_LIST_HEAD(&ua->ua_nacl_list);
ua->ua_nacl = nacl;
ua->ua_asc = asc;
ua->ua_ascq = ascq;
spin_lock_irq(&nacl->device_list_lock);
deve = &nacl->device_list[unpacked_lun];
spin_lock(&deve->ua_lock);
list_for_each_entry_safe(ua_p, ua_tmp, &deve->ua_list, ua_nacl_list) {
/*
* Do not report the same UNIT ATTENTION twice..
*/
if ((ua_p->ua_asc == asc) && (ua_p->ua_ascq == ascq)) {
spin_unlock(&deve->ua_lock);
spin_unlock_irq(&nacl->device_list_lock);
kmem_cache_free(se_ua_cache, ua);
return 0;
}
/*
* Attach the highest priority Unit Attention to
* the head of the list following sam4r14,
* Section 5.14 Unit Attention Condition:
*
* POWER ON, RESET, OR BUS DEVICE RESET OCCURRED highest
* POWER ON OCCURRED or
* DEVICE INTERNAL RESET
* SCSI BUS RESET OCCURRED or
* MICROCODE HAS BEEN CHANGED or
* protocol specific
* BUS DEVICE RESET FUNCTION OCCURRED
* I_T NEXUS LOSS OCCURRED
* COMMANDS CLEARED BY POWER LOSS NOTIFICATION
* all others Lowest
*
* Each of the ASCQ codes listed above are defined in
* the 29h ASC family, see spc4r17 Table D.1
*/
if (ua_p->ua_asc == 0x29) {
if ((asc == 0x29) && (ascq > ua_p->ua_ascq))
list_add(&ua->ua_nacl_list,
&deve->ua_list);
else
list_add_tail(&ua->ua_nacl_list,
&deve->ua_list);
} else if (ua_p->ua_asc == 0x2a) {
/*
* Incoming Family 29h ASCQ codes will override
* Family 2AHh ASCQ codes for Unit Attention condition.
*/
if ((asc == 0x29) || (ascq > ua_p->ua_asc))
list_add(&ua->ua_nacl_list,
&deve->ua_list);
else
list_add_tail(&ua->ua_nacl_list,
&deve->ua_list);
} else
list_add_tail(&ua->ua_nacl_list,
&deve->ua_list);
spin_unlock(&deve->ua_lock);
spin_unlock_irq(&nacl->device_list_lock);
atomic_inc(&deve->ua_count);
smp_mb__after_atomic_inc();
return 0;
}
list_add_tail(&ua->ua_nacl_list, &deve->ua_list);
spin_unlock(&deve->ua_lock);
spin_unlock_irq(&nacl->device_list_lock);
printk(KERN_INFO "[%s]: Allocated UNIT ATTENTION, mapped LUN: %u, ASC:"
" 0x%02x, ASCQ: 0x%02x\n",
TPG_TFO(nacl->se_tpg)->get_fabric_name(), unpacked_lun,
asc, ascq);
atomic_inc(&deve->ua_count);
smp_mb__after_atomic_inc();
return 0;
}
void core_scsi3_ua_release_all(
struct se_dev_entry *deve)
{
struct se_ua *ua, *ua_p;
spin_lock(&deve->ua_lock);
list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
list_del(&ua->ua_nacl_list);
kmem_cache_free(se_ua_cache, ua);
atomic_dec(&deve->ua_count);
smp_mb__after_atomic_dec();
}
spin_unlock(&deve->ua_lock);
}
void core_scsi3_ua_for_check_condition(
struct se_cmd *cmd,
u8 *asc,
u8 *ascq)
{
struct se_device *dev = SE_DEV(cmd);
struct se_dev_entry *deve;
struct se_session *sess = cmd->se_sess;
struct se_node_acl *nacl;
struct se_ua *ua = NULL, *ua_p;
int head = 1;
if (!(sess))
return;
nacl = sess->se_node_acl;
if (!(nacl))
return;
spin_lock_irq(&nacl->device_list_lock);
deve = &nacl->device_list[cmd->orig_fe_lun];
if (!(atomic_read(&deve->ua_count))) {
spin_unlock_irq(&nacl->device_list_lock);
return;
}
/*
* The highest priority Unit Attentions are placed at the head of the
* struct se_dev_entry->ua_list, and will be returned in CHECK_CONDITION +
* sense data for the received CDB.
*/
spin_lock(&deve->ua_lock);
list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
/*
* For ua_intlck_ctrl code not equal to 00b, only report the
* highest priority UNIT_ATTENTION and ASC/ASCQ without
* clearing it.
*/
if (DEV_ATTRIB(dev)->emulate_ua_intlck_ctrl != 0) {
*asc = ua->ua_asc;
*ascq = ua->ua_ascq;
break;
}
/*
* Otherwise for the default 00b, release the UNIT ATTENTION
* condition. Return the ASC/ASCQ of the higest priority UA
* (head of the list) in the outgoing CHECK_CONDITION + sense.
*/
if (head) {
*asc = ua->ua_asc;
*ascq = ua->ua_ascq;
head = 0;
}
list_del(&ua->ua_nacl_list);
kmem_cache_free(se_ua_cache, ua);
atomic_dec(&deve->ua_count);
smp_mb__after_atomic_dec();
}
spin_unlock(&deve->ua_lock);
spin_unlock_irq(&nacl->device_list_lock);
printk(KERN_INFO "[%s]: %s UNIT ATTENTION condition with"
" INTLCK_CTRL: %d, mapped LUN: %u, got CDB: 0x%02x"
" reported ASC: 0x%02x, ASCQ: 0x%02x\n",
TPG_TFO(nacl->se_tpg)->get_fabric_name(),
(DEV_ATTRIB(dev)->emulate_ua_intlck_ctrl != 0) ? "Reporting" :
"Releasing", DEV_ATTRIB(dev)->emulate_ua_intlck_ctrl,
cmd->orig_fe_lun, T_TASK(cmd)->t_task_cdb[0], *asc, *ascq);
}
int core_scsi3_ua_clear_for_request_sense(
struct se_cmd *cmd,
u8 *asc,
u8 *ascq)
{
struct se_dev_entry *deve;
struct se_session *sess = cmd->se_sess;
struct se_node_acl *nacl;
struct se_ua *ua = NULL, *ua_p;
int head = 1;
if (!(sess))
return -1;
nacl = sess->se_node_acl;
if (!(nacl))
return -1;
spin_lock_irq(&nacl->device_list_lock);
deve = &nacl->device_list[cmd->orig_fe_lun];
if (!(atomic_read(&deve->ua_count))) {
spin_unlock_irq(&nacl->device_list_lock);
return -1;
}
/*
* The highest priority Unit Attentions are placed at the head of the
* struct se_dev_entry->ua_list. The First (and hence highest priority)
* ASC/ASCQ will be returned in REQUEST_SENSE payload data for the
* matching struct se_lun.
*
* Once the returning ASC/ASCQ values are set, we go ahead and
* release all of the Unit Attention conditions for the assoicated
* struct se_lun.
*/
spin_lock(&deve->ua_lock);
list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) {
if (head) {
*asc = ua->ua_asc;
*ascq = ua->ua_ascq;
head = 0;
}
list_del(&ua->ua_nacl_list);
kmem_cache_free(se_ua_cache, ua);
atomic_dec(&deve->ua_count);
smp_mb__after_atomic_dec();
}
spin_unlock(&deve->ua_lock);
spin_unlock_irq(&nacl->device_list_lock);
printk(KERN_INFO "[%s]: Released UNIT ATTENTION condition, mapped"
" LUN: %u, got REQUEST_SENSE reported ASC: 0x%02x,"
" ASCQ: 0x%02x\n", TPG_TFO(nacl->se_tpg)->get_fabric_name(),
cmd->orig_fe_lun, *asc, *ascq);
return (head) ? -1 : 0;
}