linux/drivers/regulator/da9052-regulator.c
Linus Torvalds e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00

486 lines
13 KiB
C

/*
* da9052-regulator.c: Regulator driver for DA9052
*
* Copyright(c) 2011 Dialog Semiconductor Ltd.
*
* Author: David Dajun Chen <dchen@diasemi.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#ifdef CONFIG_OF
#include <linux/of.h>
#include <linux/regulator/of_regulator.h>
#endif
#include <linux/mfd/da9052/da9052.h>
#include <linux/mfd/da9052/reg.h>
#include <linux/mfd/da9052/pdata.h>
/* Buck step size */
#define DA9052_BUCK_PERI_3uV_STEP 100000
#define DA9052_BUCK_PERI_REG_MAP_UPTO_3uV 24
#define DA9052_CONST_3uV 3000000
#define DA9052_MIN_UA 0
#define DA9052_MAX_UA 3
#define DA9052_CURRENT_RANGE 4
/* Bit masks */
#define DA9052_BUCK_ILIM_MASK_EVEN 0x0c
#define DA9052_BUCK_ILIM_MASK_ODD 0xc0
/* DA9052 REGULATOR IDs */
#define DA9052_ID_BUCK1 0
#define DA9052_ID_BUCK2 1
#define DA9052_ID_BUCK3 2
#define DA9052_ID_BUCK4 3
#define DA9052_ID_LDO1 4
#define DA9052_ID_LDO2 5
#define DA9052_ID_LDO3 6
#define DA9052_ID_LDO4 7
#define DA9052_ID_LDO5 8
#define DA9052_ID_LDO6 9
#define DA9052_ID_LDO7 10
#define DA9052_ID_LDO8 11
#define DA9052_ID_LDO9 12
#define DA9052_ID_LDO10 13
static const u32 da9052_current_limits[3][4] = {
{700000, 800000, 1000000, 1200000}, /* DA9052-BC BUCKs */
{1600000, 2000000, 2400000, 3000000}, /* DA9053-AA/Bx BUCK-CORE */
{800000, 1000000, 1200000, 1500000}, /* DA9053-AA/Bx BUCK-PRO,
* BUCK-MEM and BUCK-PERI
*/
};
struct da9052_regulator_info {
struct regulator_desc reg_desc;
int step_uV;
int min_uV;
int max_uV;
unsigned char activate_bit;
};
struct da9052_regulator {
struct da9052 *da9052;
struct da9052_regulator_info *info;
struct regulator_dev *rdev;
};
static int verify_range(struct da9052_regulator_info *info,
int min_uV, int max_uV)
{
if (min_uV > info->max_uV || max_uV < info->min_uV)
return -EINVAL;
return 0;
}
static int da9052_dcdc_get_current_limit(struct regulator_dev *rdev)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
int offset = rdev_get_id(rdev);
int ret, row = 2;
ret = da9052_reg_read(regulator->da9052, DA9052_BUCKA_REG + offset/2);
if (ret < 0)
return ret;
/* Determine the even or odd position of the buck current limit
* register field
*/
if (offset % 2 == 0)
ret = (ret & DA9052_BUCK_ILIM_MASK_EVEN) >> 2;
else
ret = (ret & DA9052_BUCK_ILIM_MASK_ODD) >> 6;
/* Select the appropriate current limit range */
if (regulator->da9052->chip_id == DA9052)
row = 0;
else if (offset == 0)
row = 1;
return da9052_current_limits[row][ret];
}
static int da9052_dcdc_set_current_limit(struct regulator_dev *rdev, int min_uA,
int max_uA)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
int offset = rdev_get_id(rdev);
int reg_val = 0;
int i, row = 2;
/* Select the appropriate current limit range */
if (regulator->da9052->chip_id == DA9052)
row = 0;
else if (offset == 0)
row = 1;
for (i = DA9052_CURRENT_RANGE - 1; i >= 0; i--) {
if ((min_uA <= da9052_current_limits[row][i]) &&
(da9052_current_limits[row][i] <= max_uA)) {
reg_val = i;
break;
}
}
if (i < 0)
return -EINVAL;
/* Determine the even or odd position of the buck current limit
* register field
*/
if (offset % 2 == 0)
return da9052_reg_update(regulator->da9052,
DA9052_BUCKA_REG + offset/2,
DA9052_BUCK_ILIM_MASK_EVEN,
reg_val << 2);
else
return da9052_reg_update(regulator->da9052,
DA9052_BUCKA_REG + offset/2,
DA9052_BUCK_ILIM_MASK_ODD,
reg_val << 6);
}
static int da9052_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
struct da9052_regulator_info *info = regulator->info;
int id = rdev_get_id(rdev);
int volt_uV;
if ((id == DA9052_ID_BUCK4) && (regulator->da9052->chip_id == DA9052)
&& (selector >= DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)) {
volt_uV = ((DA9052_BUCK_PERI_REG_MAP_UPTO_3uV * info->step_uV)
+ info->min_uV);
volt_uV += (selector - DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)
* (DA9052_BUCK_PERI_3uV_STEP);
} else {
volt_uV = (selector * info->step_uV) + info->min_uV;
}
if (volt_uV > info->max_uV)
return -EINVAL;
return volt_uV;
}
static int da9052_map_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
struct da9052_regulator_info *info = regulator->info;
int id = rdev_get_id(rdev);
int ret, sel;
ret = verify_range(info, min_uV, max_uV);
if (ret < 0)
return ret;
if (min_uV < info->min_uV)
min_uV = info->min_uV;
if ((id == DA9052_ID_BUCK4) && (regulator->da9052->chip_id == DA9052)
&& (min_uV >= DA9052_CONST_3uV)) {
sel = DA9052_BUCK_PERI_REG_MAP_UPTO_3uV +
DIV_ROUND_UP(min_uV - DA9052_CONST_3uV,
DA9052_BUCK_PERI_3uV_STEP);
} else {
sel = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
}
ret = da9052_list_voltage(rdev, sel);
if (ret < 0)
return ret;
return sel;
}
static int da9052_regulator_set_voltage_sel(struct regulator_dev *rdev,
unsigned int selector)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
struct da9052_regulator_info *info = regulator->info;
int id = rdev_get_id(rdev);
int ret;
ret = da9052_reg_update(regulator->da9052, rdev->desc->vsel_reg,
rdev->desc->vsel_mask, selector);
if (ret < 0)
return ret;
/* Some LDOs and DCDCs are DVC controlled which requires enabling of
* the activate bit to implment the changes on the output.
*/
switch (id) {
case DA9052_ID_BUCK1:
case DA9052_ID_BUCK2:
case DA9052_ID_BUCK3:
case DA9052_ID_LDO2:
case DA9052_ID_LDO3:
ret = da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG,
info->activate_bit, info->activate_bit);
break;
}
return ret;
}
static int da9052_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_sel,
unsigned int new_sel)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
struct da9052_regulator_info *info = regulator->info;
int id = rdev_get_id(rdev);
int ret = 0;
/* The DVC controlled LDOs and DCDCs ramp with 6.25mV/µs after enabling
* the activate bit.
*/
switch (id) {
case DA9052_ID_BUCK1:
case DA9052_ID_BUCK2:
case DA9052_ID_BUCK3:
case DA9052_ID_LDO2:
case DA9052_ID_LDO3:
ret = (new_sel - old_sel) * info->step_uV / 6250;
break;
}
return ret;
}
static struct regulator_ops da9052_dcdc_ops = {
.get_current_limit = da9052_dcdc_get_current_limit,
.set_current_limit = da9052_dcdc_set_current_limit,
.list_voltage = da9052_list_voltage,
.map_voltage = da9052_map_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = da9052_regulator_set_voltage_sel,
.set_voltage_time_sel = da9052_regulator_set_voltage_time_sel,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
};
static struct regulator_ops da9052_ldo_ops = {
.list_voltage = da9052_list_voltage,
.map_voltage = da9052_map_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = da9052_regulator_set_voltage_sel,
.set_voltage_time_sel = da9052_regulator_set_voltage_time_sel,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
};
#define DA9052_LDO(_id, step, min, max, sbits, ebits, abits) \
{\
.reg_desc = {\
.name = #_id,\
.ops = &da9052_ldo_ops,\
.type = REGULATOR_VOLTAGE,\
.id = DA9052_ID_##_id,\
.n_voltages = (max - min) / step + 1, \
.owner = THIS_MODULE,\
.vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.vsel_mask = (1 << (sbits)) - 1,\
.enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.enable_mask = 1 << (ebits),\
},\
.min_uV = (min) * 1000,\
.max_uV = (max) * 1000,\
.step_uV = (step) * 1000,\
.activate_bit = (abits),\
}
#define DA9052_DCDC(_id, step, min, max, sbits, ebits, abits) \
{\
.reg_desc = {\
.name = #_id,\
.ops = &da9052_dcdc_ops,\
.type = REGULATOR_VOLTAGE,\
.id = DA9052_ID_##_id,\
.n_voltages = (max - min) / step + 1, \
.owner = THIS_MODULE,\
.vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.vsel_mask = (1 << (sbits)) - 1,\
.enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.enable_mask = 1 << (ebits),\
},\
.min_uV = (min) * 1000,\
.max_uV = (max) * 1000,\
.step_uV = (step) * 1000,\
.activate_bit = (abits),\
}
static struct da9052_regulator_info da9052_regulator_info[] = {
DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO),
DA9052_DCDC(BUCK4, 50, 1800, 3600, 5, 6, 0),
DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0),
DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
DA9052_LDO(LDO4, 25, 1725, 3300, 6, 6, 0),
DA9052_LDO(LDO5, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO6, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO7, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO8, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO9, 50, 1250, 3650, 6, 6, 0),
DA9052_LDO(LDO10, 50, 1200, 3600, 6, 6, 0),
};
static struct da9052_regulator_info da9053_regulator_info[] = {
DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO),
DA9052_DCDC(BUCK4, 25, 925, 2500, 6, 6, 0),
DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0),
DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
DA9052_LDO(LDO4, 25, 1725, 3300, 6, 6, 0),
DA9052_LDO(LDO5, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO6, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO7, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO8, 50, 1200, 3600, 6, 6, 0),
DA9052_LDO(LDO9, 50, 1250, 3650, 6, 6, 0),
DA9052_LDO(LDO10, 50, 1200, 3600, 6, 6, 0),
};
static inline struct da9052_regulator_info *find_regulator_info(u8 chip_id,
int id)
{
struct da9052_regulator_info *info;
int i;
switch (chip_id) {
case DA9052:
for (i = 0; i < ARRAY_SIZE(da9052_regulator_info); i++) {
info = &da9052_regulator_info[i];
if (info->reg_desc.id == id)
return info;
}
break;
case DA9053_AA:
case DA9053_BA:
case DA9053_BB:
for (i = 0; i < ARRAY_SIZE(da9053_regulator_info); i++) {
info = &da9053_regulator_info[i];
if (info->reg_desc.id == id)
return info;
}
break;
}
return NULL;
}
static int da9052_regulator_probe(struct platform_device *pdev)
{
struct regulator_config config = { };
struct da9052_regulator *regulator;
struct da9052 *da9052;
struct da9052_pdata *pdata;
regulator = devm_kzalloc(&pdev->dev, sizeof(struct da9052_regulator),
GFP_KERNEL);
if (!regulator)
return -ENOMEM;
da9052 = dev_get_drvdata(pdev->dev.parent);
pdata = dev_get_platdata(da9052->dev);
regulator->da9052 = da9052;
regulator->info = find_regulator_info(regulator->da9052->chip_id,
pdev->id);
if (regulator->info == NULL) {
dev_err(&pdev->dev, "invalid regulator ID specified\n");
return -EINVAL;
}
config.dev = &pdev->dev;
config.driver_data = regulator;
config.regmap = da9052->regmap;
if (pdata && pdata->regulators) {
config.init_data = pdata->regulators[pdev->id];
} else {
#ifdef CONFIG_OF
struct device_node *nproot = da9052->dev->of_node;
struct device_node *np;
if (!nproot)
return -ENODEV;
nproot = of_get_child_by_name(nproot, "regulators");
if (!nproot)
return -ENODEV;
for_each_child_of_node(nproot, np) {
if (!of_node_cmp(np->name,
regulator->info->reg_desc.name)) {
config.init_data = of_get_regulator_init_data(
&pdev->dev, np,
&regulator->info->reg_desc);
config.of_node = np;
break;
}
}
of_node_put(nproot);
#endif
}
regulator->rdev = devm_regulator_register(&pdev->dev,
&regulator->info->reg_desc,
&config);
if (IS_ERR(regulator->rdev)) {
dev_err(&pdev->dev, "failed to register regulator %s\n",
regulator->info->reg_desc.name);
return PTR_ERR(regulator->rdev);
}
platform_set_drvdata(pdev, regulator);
return 0;
}
static struct platform_driver da9052_regulator_driver = {
.probe = da9052_regulator_probe,
.driver = {
.name = "da9052-regulator",
},
};
static int __init da9052_regulator_init(void)
{
return platform_driver_register(&da9052_regulator_driver);
}
subsys_initcall(da9052_regulator_init);
static void __exit da9052_regulator_exit(void)
{
platform_driver_unregister(&da9052_regulator_driver);
}
module_exit(da9052_regulator_exit);
MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
MODULE_DESCRIPTION("Power Regulator driver for Dialog DA9052 PMIC");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:da9052-regulator");