linux/drivers/usb/serial/metro-usb.c
Greg Kroah-Hartman 1143832eca USB: serial: ports: add minor and port number
The usb_serial_port structure had the number field, which was the minor
number for the port, which almost no one really cared about.  They
really wanted the number of the port within the device, which you had to
subtract from the minor of the parent usb_serial_device structure.  To
clean this up, provide the real minor number of the port, and the number
of the port within the serial device separately, as these numbers might
not be related in the future.

Bonus is that this cleans up a lot of logic in the drivers, and saves
lines overall.

Tested-by: Tobias Winter <tobias@linuxdingsda.de>
Reviewed-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

--
 drivers/staging/serqt_usb2/serqt_usb2.c |   21 +++--------
 drivers/usb/serial/ark3116.c            |    2 -
 drivers/usb/serial/bus.c                |    6 +--
 drivers/usb/serial/console.c            |    2 -
 drivers/usb/serial/cp210x.c             |    2 -
 drivers/usb/serial/cypress_m8.c         |    4 +-
 drivers/usb/serial/digi_acceleport.c    |    6 ---
 drivers/usb/serial/f81232.c             |    5 +-
 drivers/usb/serial/garmin_gps.c         |    6 +--
 drivers/usb/serial/io_edgeport.c        |   58 ++++++++++++--------------------
 drivers/usb/serial/io_ti.c              |   21 ++++-------
 drivers/usb/serial/keyspan.c            |   29 +++++++---------
 drivers/usb/serial/metro-usb.c          |    4 +-
 drivers/usb/serial/mos7720.c            |   37 +++++++++-----------
 drivers/usb/serial/mos7840.c            |   52 +++++++++-------------------
 drivers/usb/serial/opticon.c            |    2 -
 drivers/usb/serial/pl2303.c             |    2 -
 drivers/usb/serial/quatech2.c           |    7 +--
 drivers/usb/serial/sierra.c             |    2 -
 drivers/usb/serial/ti_usb_3410_5052.c   |   10 ++---
 drivers/usb/serial/usb-serial.c         |    7 ++-
 drivers/usb/serial/usb_wwan.c           |    2 -
 drivers/usb/serial/whiteheat.c          |   20 +++++------
 include/linux/usb/serial.h              |    6 ++-
 24 files changed, 133 insertions(+), 180 deletions(-)
2013-06-10 14:46:40 -07:00

401 lines
11 KiB
C

/*
Some of this code is credited to Linux USB open source files that are
distributed with Linux.
Copyright: 2007 Metrologic Instruments. All rights reserved.
Copyright: 2011 Azimut Ltd. <http://azimutrzn.ru/>
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/usb/serial.h>
#define DRIVER_DESC "Metrologic Instruments Inc. - USB-POS driver"
/* Product information. */
#define FOCUS_VENDOR_ID 0x0C2E
#define FOCUS_PRODUCT_ID_BI 0x0720
#define FOCUS_PRODUCT_ID_UNI 0x0700
#define METROUSB_SET_REQUEST_TYPE 0x40
#define METROUSB_SET_MODEM_CTRL_REQUEST 10
#define METROUSB_SET_BREAK_REQUEST 0x40
#define METROUSB_MCR_NONE 0x08 /* Deactivate DTR and RTS. */
#define METROUSB_MCR_RTS 0x0a /* Activate RTS. */
#define METROUSB_MCR_DTR 0x09 /* Activate DTR. */
#define WDR_TIMEOUT 5000 /* default urb timeout. */
/* Private data structure. */
struct metrousb_private {
spinlock_t lock;
int throttled;
unsigned long control_state;
};
/* Device table list. */
static struct usb_device_id id_table[] = {
{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) },
{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) },
{ }, /* Terminating entry. */
};
MODULE_DEVICE_TABLE(usb, id_table);
/* UNI-Directional mode commands for device configure */
#define UNI_CMD_OPEN 0x80
#define UNI_CMD_CLOSE 0xFF
inline int metrousb_is_unidirectional_mode(struct usb_serial_port *port)
{
__u16 product_id = le16_to_cpu(
port->serial->dev->descriptor.idProduct);
return product_id == FOCUS_PRODUCT_ID_UNI;
}
static int metrousb_send_unidirectional_cmd(u8 cmd, struct usb_serial_port *port)
{
int ret;
int actual_len;
u8 *buffer_cmd = NULL;
if (!metrousb_is_unidirectional_mode(port))
return 0;
buffer_cmd = kzalloc(sizeof(cmd), GFP_KERNEL);
if (!buffer_cmd)
return -ENOMEM;
*buffer_cmd = cmd;
ret = usb_interrupt_msg(port->serial->dev,
usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
buffer_cmd, sizeof(cmd),
&actual_len, USB_CTRL_SET_TIMEOUT);
kfree(buffer_cmd);
if (ret < 0)
return ret;
else if (actual_len != sizeof(cmd))
return -EIO;
return 0;
}
static void metrousb_read_int_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
unsigned char *data = urb->transfer_buffer;
int throttled = 0;
int result = 0;
unsigned long flags = 0;
dev_dbg(&port->dev, "%s\n", __func__);
switch (urb->status) {
case 0:
/* Success status, read from the port. */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* urb has been terminated. */
dev_dbg(&port->dev,
"%s - urb shutting down, error code=%d\n",
__func__, urb->status);
return;
default:
dev_dbg(&port->dev,
"%s - non-zero urb received, error code=%d\n",
__func__, urb->status);
goto exit;
}
/* Set the data read from the usb port into the serial port buffer. */
if (urb->actual_length) {
/* Loop through the data copying each byte to the tty layer. */
tty_insert_flip_string(&port->port, data, urb->actual_length);
/* Force the data to the tty layer. */
tty_flip_buffer_push(&port->port);
}
/* Set any port variables. */
spin_lock_irqsave(&metro_priv->lock, flags);
throttled = metro_priv->throttled;
spin_unlock_irqrestore(&metro_priv->lock, flags);
/* Continue trying to read if set. */
if (!throttled) {
usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress),
port->interrupt_in_urb->transfer_buffer,
port->interrupt_in_urb->transfer_buffer_length,
metrousb_read_int_callback, port, 1);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result)
dev_err(&port->dev,
"%s - failed submitting interrupt in urb, error code=%d\n",
__func__, result);
}
return;
exit:
/* Try to resubmit the urb. */
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
dev_err(&port->dev,
"%s - failed submitting interrupt in urb, error code=%d\n",
__func__, result);
}
static void metrousb_write_int_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
dev_warn(&port->dev, "%s not implemented yet.\n",
__func__);
}
static void metrousb_cleanup(struct usb_serial_port *port)
{
dev_dbg(&port->dev, "%s\n", __func__);
usb_unlink_urb(port->interrupt_in_urb);
usb_kill_urb(port->interrupt_in_urb);
metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port);
}
static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
unsigned long flags = 0;
int result = 0;
dev_dbg(&port->dev, "%s\n", __func__);
/* Make sure the urb is initialized. */
if (!port->interrupt_in_urb) {
dev_err(&port->dev, "%s - interrupt urb not initialized\n",
__func__);
return -ENODEV;
}
/* Set the private data information for the port. */
spin_lock_irqsave(&metro_priv->lock, flags);
metro_priv->control_state = 0;
metro_priv->throttled = 0;
spin_unlock_irqrestore(&metro_priv->lock, flags);
/* Clear the urb pipe. */
usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe);
/* Start reading from the device */
usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
port->interrupt_in_urb->transfer_buffer,
port->interrupt_in_urb->transfer_buffer_length,
metrousb_read_int_callback, port, 1);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev,
"%s - failed submitting interrupt in urb, error code=%d\n",
__func__, result);
goto exit;
}
/* Send activate cmd to device */
result = metrousb_send_unidirectional_cmd(UNI_CMD_OPEN, port);
if (result) {
dev_err(&port->dev,
"%s - failed to configure device, error code=%d\n",
__func__, result);
goto exit;
}
dev_dbg(&port->dev, "%s - port open\n", __func__);
exit:
return result;
}
static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int control_state)
{
int retval = 0;
unsigned char mcr = METROUSB_MCR_NONE;
dev_dbg(&serial->dev->dev, "%s - control state = %d\n",
__func__, control_state);
/* Set the modem control value. */
if (control_state & TIOCM_DTR)
mcr |= METROUSB_MCR_DTR;
if (control_state & TIOCM_RTS)
mcr |= METROUSB_MCR_RTS;
/* Send the command to the usb port. */
retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
METROUSB_SET_REQUEST_TYPE, METROUSB_SET_MODEM_CTRL_REQUEST,
control_state, 0, NULL, 0, WDR_TIMEOUT);
if (retval < 0)
dev_err(&serial->dev->dev,
"%s - set modem ctrl=0x%x failed, error code=%d\n",
__func__, mcr, retval);
return retval;
}
static int metrousb_port_probe(struct usb_serial_port *port)
{
struct metrousb_private *metro_priv;
metro_priv = kzalloc(sizeof(*metro_priv), GFP_KERNEL);
if (!metro_priv)
return -ENOMEM;
spin_lock_init(&metro_priv->lock);
usb_set_serial_port_data(port, metro_priv);
return 0;
}
static int metrousb_port_remove(struct usb_serial_port *port)
{
struct metrousb_private *metro_priv;
metro_priv = usb_get_serial_port_data(port);
kfree(metro_priv);
return 0;
}
static void metrousb_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
unsigned long flags = 0;
dev_dbg(tty->dev, "%s\n", __func__);
/* Set the private information for the port to stop reading data. */
spin_lock_irqsave(&metro_priv->lock, flags);
metro_priv->throttled = 1;
spin_unlock_irqrestore(&metro_priv->lock, flags);
}
static int metrousb_tiocmget(struct tty_struct *tty)
{
unsigned long control_state = 0;
struct usb_serial_port *port = tty->driver_data;
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
unsigned long flags = 0;
dev_dbg(tty->dev, "%s\n", __func__);
spin_lock_irqsave(&metro_priv->lock, flags);
control_state = metro_priv->control_state;
spin_unlock_irqrestore(&metro_priv->lock, flags);
return control_state;
}
static int metrousb_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
unsigned long flags = 0;
unsigned long control_state = 0;
dev_dbg(tty->dev, "%s - set=%d, clear=%d\n", __func__, set, clear);
spin_lock_irqsave(&metro_priv->lock, flags);
control_state = metro_priv->control_state;
/* Set the RTS and DTR values. */
if (set & TIOCM_RTS)
control_state |= TIOCM_RTS;
if (set & TIOCM_DTR)
control_state |= TIOCM_DTR;
if (clear & TIOCM_RTS)
control_state &= ~TIOCM_RTS;
if (clear & TIOCM_DTR)
control_state &= ~TIOCM_DTR;
metro_priv->control_state = control_state;
spin_unlock_irqrestore(&metro_priv->lock, flags);
return metrousb_set_modem_ctrl(serial, control_state);
}
static void metrousb_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
unsigned long flags = 0;
int result = 0;
dev_dbg(tty->dev, "%s\n", __func__);
/* Set the private information for the port to resume reading data. */
spin_lock_irqsave(&metro_priv->lock, flags);
metro_priv->throttled = 0;
spin_unlock_irqrestore(&metro_priv->lock, flags);
/* Submit the urb to read from the port. */
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result)
dev_err(tty->dev,
"failed submitting interrupt in urb error code=%d\n",
result);
}
static struct usb_serial_driver metrousb_device = {
.driver = {
.owner = THIS_MODULE,
.name = "metro-usb",
},
.description = "Metrologic USB to Serial",
.id_table = id_table,
.num_ports = 1,
.open = metrousb_open,
.close = metrousb_cleanup,
.read_int_callback = metrousb_read_int_callback,
.write_int_callback = metrousb_write_int_callback,
.port_probe = metrousb_port_probe,
.port_remove = metrousb_port_remove,
.throttle = metrousb_throttle,
.unthrottle = metrousb_unthrottle,
.tiocmget = metrousb_tiocmget,
.tiocmset = metrousb_tiocmset,
};
static struct usb_serial_driver * const serial_drivers[] = {
&metrousb_device,
NULL,
};
module_usb_serial_driver(serial_drivers, id_table);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Philip Nicastro");
MODULE_AUTHOR("Aleksey Babahin <tamerlan311@gmail.com>");
MODULE_DESCRIPTION(DRIVER_DESC);