linux/arch/m68k/include/asm/m5206sim.h
Greg Ungerer 8400ca322e m68knommu: make 5206 UART platform addressing consistent
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 5206 UART addressing so that:

. UARTs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:05 +10:00

150 lines
5.9 KiB
C

/****************************************************************************/
/*
* m5206sim.h -- ColdFire 5206 System Integration Module support.
*
* (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
* (C) Copyright 2000, Lineo Inc. (www.lineo.com)
*/
/****************************************************************************/
#ifndef m5206sim_h
#define m5206sim_h
/****************************************************************************/
#define CPU_NAME "COLDFIRE(m5206)"
#define CPU_INSTR_PER_JIFFY 3
#define MCF_BUSCLK MCF_CLK
#include <asm/m52xxacr.h>
/*
* Define the 5206 SIM register set addresses.
*/
#define MCFSIM_SIMR 0x03 /* SIM Config reg (r/w) */
#define MCFSIM_ICR1 0x14 /* Intr Ctrl reg 1 (r/w) */
#define MCFSIM_ICR2 0x15 /* Intr Ctrl reg 2 (r/w) */
#define MCFSIM_ICR3 0x16 /* Intr Ctrl reg 3 (r/w) */
#define MCFSIM_ICR4 0x17 /* Intr Ctrl reg 4 (r/w) */
#define MCFSIM_ICR5 0x18 /* Intr Ctrl reg 5 (r/w) */
#define MCFSIM_ICR6 0x19 /* Intr Ctrl reg 6 (r/w) */
#define MCFSIM_ICR7 0x1a /* Intr Ctrl reg 7 (r/w) */
#define MCFSIM_ICR8 0x1b /* Intr Ctrl reg 8 (r/w) */
#define MCFSIM_ICR9 0x1c /* Intr Ctrl reg 9 (r/w) */
#define MCFSIM_ICR10 0x1d /* Intr Ctrl reg 10 (r/w) */
#define MCFSIM_ICR11 0x1e /* Intr Ctrl reg 11 (r/w) */
#define MCFSIM_ICR12 0x1f /* Intr Ctrl reg 12 (r/w) */
#define MCFSIM_ICR13 0x20 /* Intr Ctrl reg 13 (r/w) */
#ifdef CONFIG_M5206e
#define MCFSIM_ICR14 0x21 /* Intr Ctrl reg 14 (r/w) */
#define MCFSIM_ICR15 0x22 /* Intr Ctrl reg 15 (r/w) */
#endif
#define MCFSIM_IMR 0x36 /* Interrupt Mask reg (r/w) */
#define MCFSIM_IPR 0x3a /* Interrupt Pend reg (r/w) */
#define MCFSIM_RSR 0x40 /* Reset Status reg (r/w) */
#define MCFSIM_SYPCR 0x41 /* System Protection reg (r/w)*/
#define MCFSIM_SWIVR 0x42 /* SW Watchdog intr reg (r/w) */
#define MCFSIM_SWSR 0x43 /* SW Watchdog service (r/w) */
#define MCFSIM_DCRR (MCF_MBAR + 0x46) /* DRAM Refresh reg (r/w) */
#define MCFSIM_DCTR (MCF_MBAR + 0x4a) /* DRAM Timing reg (r/w) */
#define MCFSIM_DAR0 (MCF_MBAR + 0x4c) /* DRAM 0 Address reg(r/w) */
#define MCFSIM_DMR0 (MCF_MBAR + 0x50) /* DRAM 0 Mask reg (r/w) */
#define MCFSIM_DCR0 (MCF_MBAR + 0x57) /* DRAM 0 Control reg (r/w) */
#define MCFSIM_DAR1 (MCF_MBAR + 0x58) /* DRAM 1 Address reg (r/w) */
#define MCFSIM_DMR1 (MCF_MBAR + 0x5c) /* DRAM 1 Mask reg (r/w) */
#define MCFSIM_DCR1 (MCF_MBAR + 0x63) /* DRAM 1 Control reg (r/w) */
#define MCFSIM_CSAR0 0x64 /* CS 0 Address 0 reg (r/w) */
#define MCFSIM_CSMR0 0x68 /* CS 0 Mask 0 reg (r/w) */
#define MCFSIM_CSCR0 0x6e /* CS 0 Control reg (r/w) */
#define MCFSIM_CSAR1 0x70 /* CS 1 Address reg (r/w) */
#define MCFSIM_CSMR1 0x74 /* CS 1 Mask reg (r/w) */
#define MCFSIM_CSCR1 0x7a /* CS 1 Control reg (r/w) */
#define MCFSIM_CSAR2 0x7c /* CS 2 Address reg (r/w) */
#define MCFSIM_CSMR2 0x80 /* CS 2 Mask reg (r/w) */
#define MCFSIM_CSCR2 0x86 /* CS 2 Control reg (r/w) */
#define MCFSIM_CSAR3 0x88 /* CS 3 Address reg (r/w) */
#define MCFSIM_CSMR3 0x8c /* CS 3 Mask reg (r/w) */
#define MCFSIM_CSCR3 0x92 /* CS 3 Control reg (r/w) */
#define MCFSIM_CSAR4 0x94 /* CS 4 Address reg (r/w) */
#define MCFSIM_CSMR4 0x98 /* CS 4 Mask reg (r/w) */
#define MCFSIM_CSCR4 0x9e /* CS 4 Control reg (r/w) */
#define MCFSIM_CSAR5 0xa0 /* CS 5 Address reg (r/w) */
#define MCFSIM_CSMR5 0xa4 /* CS 5 Mask reg (r/w) */
#define MCFSIM_CSCR5 0xaa /* CS 5 Control reg (r/w) */
#define MCFSIM_CSAR6 0xac /* CS 6 Address reg (r/w) */
#define MCFSIM_CSMR6 0xb0 /* CS 6 Mask reg (r/w) */
#define MCFSIM_CSCR6 0xb6 /* CS 6 Control reg (r/w) */
#define MCFSIM_CSAR7 0xb8 /* CS 7 Address reg (r/w) */
#define MCFSIM_CSMR7 0xbc /* CS 7 Mask reg (r/w) */
#define MCFSIM_CSCR7 0xc2 /* CS 7 Control reg (r/w) */
#define MCFSIM_DMCR 0xc6 /* Default control */
#ifdef CONFIG_M5206e
#define MCFSIM_PAR 0xca /* Pin Assignment reg (r/w) */
#else
#define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */
#endif
#define MCFTIMER_BASE1 (MCF_MBAR + 0x100) /* Base of TIMER1 */
#define MCFTIMER_BASE2 (MCF_MBAR + 0x120) /* Base of TIMER2 */
#define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */
#define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */
#define MCFDMA_BASE0 (MCF_MBAR + 0x200) /* Base address DMA 0 */
#define MCFDMA_BASE1 (MCF_MBAR + 0x240) /* Base address DMA 1 */
#if defined(CONFIG_NETtel)
#define MCFUART_BASE0 (MCF_MBAR + 0x180) /* Base address UART0 */
#define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */
#else
#define MCFUART_BASE0 (MCF_MBAR + 0x140) /* Base address UART0 */
#define MCFUART_BASE1 (MCF_MBAR + 0x180) /* Base address UART1 */
#endif
/*
* Define system peripheral IRQ usage.
*/
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
#define MCF_IRQ_UART0 73 /* UART0 */
#define MCF_IRQ_UART1 74 /* UART1 */
/*
* Generic GPIO
*/
#define MCFGPIO_PIN_MAX 8
#define MCFGPIO_IRQ_VECBASE -1
#define MCFGPIO_IRQ_MAX -1
/*
* Some symbol defines for the Parallel Port Pin Assignment Register
*/
#ifdef CONFIG_M5206e
#define MCFSIM_PAR_DREQ0 0x100 /* Set to select DREQ0 input */
/* Clear to select T0 input */
#define MCFSIM_PAR_DREQ1 0x200 /* Select DREQ1 input */
/* Clear to select T0 output */
#endif
/*
* Some symbol defines for the Interrupt Control Register
*/
#define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */
#define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */
#define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */
#define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */
#define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */
#ifdef CONFIG_M5206e
#define MCFSIM_DMA1ICR MCFSIM_ICR14 /* DMA 1 ICR */
#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */
#endif
/****************************************************************************/
#endif /* m5206sim_h */