linux/drivers/pci/dwc/pcie-designware.c
Kishon Vijay Abraham I f8aed6ec62 PCI: dwc: designware: Add EP mode support
Add endpoint mode support to designware driver. This uses the EP Core layer
introduced recently to add endpoint mode support.  *Any* function driver
can now use this designware device in order to achieve the EP
functionality.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-28 10:23:16 -05:00

396 lines
9.7 KiB
C

/*
* Synopsys Designware PCIe host controller driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Jingoo Han <jg1.han@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/types.h>
#include "pcie-designware.h"
/* PCIe Port Logic registers */
#define PLR_OFFSET 0x700
#define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c)
#define PCIE_PHY_DEBUG_R1_LINK_UP (0x1 << 4)
#define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING (0x1 << 29)
int dw_pcie_read(void __iomem *addr, int size, u32 *val)
{
if ((uintptr_t)addr & (size - 1)) {
*val = 0;
return PCIBIOS_BAD_REGISTER_NUMBER;
}
if (size == 4) {
*val = readl(addr);
} else if (size == 2) {
*val = readw(addr);
} else if (size == 1) {
*val = readb(addr);
} else {
*val = 0;
return PCIBIOS_BAD_REGISTER_NUMBER;
}
return PCIBIOS_SUCCESSFUL;
}
int dw_pcie_write(void __iomem *addr, int size, u32 val)
{
if ((uintptr_t)addr & (size - 1))
return PCIBIOS_BAD_REGISTER_NUMBER;
if (size == 4)
writel(val, addr);
else if (size == 2)
writew(val, addr);
else if (size == 1)
writeb(val, addr);
else
return PCIBIOS_BAD_REGISTER_NUMBER;
return PCIBIOS_SUCCESSFUL;
}
u32 __dw_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
size_t size)
{
int ret;
u32 val;
if (pci->ops->read_dbi)
return pci->ops->read_dbi(pci, base, reg, size);
ret = dw_pcie_read(base + reg, size, &val);
if (ret)
dev_err(pci->dev, "read DBI address failed\n");
return val;
}
void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
size_t size, u32 val)
{
int ret;
if (pci->ops->write_dbi) {
pci->ops->write_dbi(pci, base, reg, size, val);
return;
}
ret = dw_pcie_write(base + reg, size, val);
if (ret)
dev_err(pci->dev, "write DBI address failed\n");
}
static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg)
{
u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
return dw_pcie_readl_dbi(pci, offset + reg);
}
static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
u32 val)
{
u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
dw_pcie_writel_dbi(pci, offset + reg, val);
}
void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index, int type,
u64 cpu_addr, u64 pci_addr, u32 size)
{
u32 retries, val;
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
lower_32_bits(cpu_addr));
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
upper_32_bits(cpu_addr));
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
lower_32_bits(cpu_addr + size - 1));
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
lower_32_bits(pci_addr));
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
upper_32_bits(pci_addr));
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
type);
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
PCIE_ATU_ENABLE);
/*
* Make sure ATU enable takes effect before any subsequent config
* and I/O accesses.
*/
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
val = dw_pcie_readl_ob_unroll(pci, index,
PCIE_ATU_UNR_REGION_CTRL2);
if (val & PCIE_ATU_ENABLE)
return;
usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
}
dev_err(pci->dev, "outbound iATU is not being enabled\n");
}
void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
u64 cpu_addr, u64 pci_addr, u32 size)
{
u32 retries, val;
if (pci->ops->cpu_addr_fixup)
cpu_addr = pci->ops->cpu_addr_fixup(cpu_addr);
if (pci->iatu_unroll_enabled) {
dw_pcie_prog_outbound_atu_unroll(pci, index, type, cpu_addr,
pci_addr, size);
return;
}
dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
PCIE_ATU_REGION_OUTBOUND | index);
dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
lower_32_bits(cpu_addr));
dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
upper_32_bits(cpu_addr));
dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
lower_32_bits(cpu_addr + size - 1));
dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
lower_32_bits(pci_addr));
dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
upper_32_bits(pci_addr));
dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
/*
* Make sure ATU enable takes effect before any subsequent config
* and I/O accesses.
*/
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
if (val == PCIE_ATU_ENABLE)
return;
usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
}
dev_err(pci->dev, "outbound iATU is not being enabled\n");
}
static u32 dw_pcie_readl_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg)
{
u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
return dw_pcie_readl_dbi(pci, offset + reg);
}
static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg,
u32 val)
{
u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
dw_pcie_writel_dbi(pci, offset + reg, val);
}
int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index, int bar,
u64 cpu_addr, enum dw_pcie_as_type as_type)
{
int type;
u32 retries, val;
dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
lower_32_bits(cpu_addr));
dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
upper_32_bits(cpu_addr));
switch (as_type) {
case DW_PCIE_AS_MEM:
type = PCIE_ATU_TYPE_MEM;
break;
case DW_PCIE_AS_IO:
type = PCIE_ATU_TYPE_IO;
break;
default:
return -EINVAL;
}
dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, type);
dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
PCIE_ATU_ENABLE |
PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
/*
* Make sure ATU enable takes effect before any subsequent config
* and I/O accesses.
*/
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
val = dw_pcie_readl_ib_unroll(pci, index,
PCIE_ATU_UNR_REGION_CTRL2);
if (val & PCIE_ATU_ENABLE)
return 0;
usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
}
dev_err(pci->dev, "inbound iATU is not being enabled\n");
return -EBUSY;
}
int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
u64 cpu_addr, enum dw_pcie_as_type as_type)
{
int type;
u32 retries, val;
if (pci->iatu_unroll_enabled)
return dw_pcie_prog_inbound_atu_unroll(pci, index, bar,
cpu_addr, as_type);
dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_INBOUND |
index);
dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, lower_32_bits(cpu_addr));
dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, upper_32_bits(cpu_addr));
switch (as_type) {
case DW_PCIE_AS_MEM:
type = PCIE_ATU_TYPE_MEM;
break;
case DW_PCIE_AS_IO:
type = PCIE_ATU_TYPE_IO;
break;
default:
return -EINVAL;
}
dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE
| PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
/*
* Make sure ATU enable takes effect before any subsequent config
* and I/O accesses.
*/
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
if (val & PCIE_ATU_ENABLE)
return 0;
usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
}
dev_err(pci->dev, "inbound iATU is not being enabled\n");
return -EBUSY;
}
void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
enum dw_pcie_region_type type)
{
int region;
switch (type) {
case DW_PCIE_REGION_INBOUND:
region = PCIE_ATU_REGION_INBOUND;
break;
case DW_PCIE_REGION_OUTBOUND:
region = PCIE_ATU_REGION_OUTBOUND;
break;
default:
return;
}
dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, region | index);
dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, ~PCIE_ATU_ENABLE);
}
int dw_pcie_wait_for_link(struct dw_pcie *pci)
{
int retries;
/* check if the link is up or not */
for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
if (dw_pcie_link_up(pci)) {
dev_info(pci->dev, "link up\n");
return 0;
}
usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
}
dev_err(pci->dev, "phy link never came up\n");
return -ETIMEDOUT;
}
int dw_pcie_link_up(struct dw_pcie *pci)
{
u32 val;
if (pci->ops->link_up)
return pci->ops->link_up(pci);
val = readl(pci->dbi_base + PCIE_PHY_DEBUG_R1);
return ((val & PCIE_PHY_DEBUG_R1_LINK_UP) &&
(!(val & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING)));
}
void dw_pcie_setup(struct dw_pcie *pci)
{
int ret;
u32 val;
u32 lanes;
struct device *dev = pci->dev;
struct device_node *np = dev->of_node;
ret = of_property_read_u32(np, "num-lanes", &lanes);
if (ret)
lanes = 0;
/* set the number of lanes */
val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
val &= ~PORT_LINK_MODE_MASK;
switch (lanes) {
case 1:
val |= PORT_LINK_MODE_1_LANES;
break;
case 2:
val |= PORT_LINK_MODE_2_LANES;
break;
case 4:
val |= PORT_LINK_MODE_4_LANES;
break;
case 8:
val |= PORT_LINK_MODE_8_LANES;
break;
default:
dev_err(pci->dev, "num-lanes %u: invalid value\n", lanes);
return;
}
dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
/* set link width speed control register */
val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
switch (lanes) {
case 1:
val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
break;
case 2:
val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
break;
case 4:
val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
break;
case 8:
val |= PORT_LOGIC_LINK_WIDTH_8_LANES;
break;
}
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
}