linux/sound/soc/atmel/tse850-pcm5142.c
Kuninori Morimoto 6910bb935a
ASoC: atmel: tse850-pcm5142: consider CPU-Platform possibility
commit 655368dfc7 ("ASoC: atmel: tse850-pcm5142: don't select
unnecessary Platform")

Current ALSA SoC avoid to add duplicate component to rtd,
and this driver was selecting CPU component as Platform component.
Thus, above patch removed Platform settings from this driver,
because it assumed these are same component.

But, some CPU driver is using generic DMAEngine, in such case, both
CPU component and Platform component will have same of_node/name.
In other words, there are some components which are different but
have same of_node/name.

In such case, Card driver definitely need to select Platform even
though it is same as CPU.
It is depends on CPU driver, but is difficult to know it from Card driver.
This patch reverts above patch.

Fixes: commit 655368dfc7 ("ASoC: atmel: tse850-pcm5142: don't select unnecessary Platform")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-28 15:10:51 +01:00

455 lines
13 KiB
C

// SPDX-License-Identifier: GPL-2.0
//
// TSE-850 audio - ASoC driver for the Axentia TSE-850 with a PCM5142 codec
//
// Copyright (C) 2016 Axentia Technologies AB
//
// Author: Peter Rosin <peda@axentia.se>
//
// loop1 relays
// IN1 +---o +------------+ o---+ OUT1
// \ /
// + +
// | / |
// +--o +--. |
// | add | |
// | V |
// | .---. |
// DAC +----------->|Sum|---+
// | '---' |
// | |
// + +
//
// IN2 +---o--+------------+--o---+ OUT2
// loop2 relays
//
// The 'loop1' gpio pin controlls two relays, which are either in loop
// position, meaning that input and output are directly connected, or
// they are in mixer position, meaning that the signal is passed through
// the 'Sum' mixer. Similarly for 'loop2'.
//
// In the above, the 'loop1' relays are inactive, thus feeding IN1 to the
// mixer (if 'add' is active) and feeding the mixer output to OUT1. The
// 'loop2' relays are active, short-cutting the TSE-850 from channel 2.
// IN1, IN2, OUT1 and OUT2 are TSE-850 connectors and DAC is the PCB name
// of the (filtered) output from the PCM5142 codec.
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>
struct tse850_priv {
struct gpio_desc *add;
struct gpio_desc *loop1;
struct gpio_desc *loop2;
struct regulator *ana;
int add_cache;
int loop1_cache;
int loop2_cache;
};
static int tse850_get_mux1(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
ucontrol->value.enumerated.item[0] = tse850->loop1_cache;
return 0;
}
static int tse850_put_mux1(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
struct soc_enum *e = (struct soc_enum *)kctrl->private_value;
unsigned int val = ucontrol->value.enumerated.item[0];
if (val >= e->items)
return -EINVAL;
gpiod_set_value_cansleep(tse850->loop1, val);
tse850->loop1_cache = val;
return snd_soc_dapm_put_enum_double(kctrl, ucontrol);
}
static int tse850_get_mux2(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
ucontrol->value.enumerated.item[0] = tse850->loop2_cache;
return 0;
}
static int tse850_put_mux2(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
struct soc_enum *e = (struct soc_enum *)kctrl->private_value;
unsigned int val = ucontrol->value.enumerated.item[0];
if (val >= e->items)
return -EINVAL;
gpiod_set_value_cansleep(tse850->loop2, val);
tse850->loop2_cache = val;
return snd_soc_dapm_put_enum_double(kctrl, ucontrol);
}
static int tse850_get_mix(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
ucontrol->value.enumerated.item[0] = tse850->add_cache;
return 0;
}
static int tse850_put_mix(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
int connect = !!ucontrol->value.integer.value[0];
if (tse850->add_cache == connect)
return 0;
/*
* Hmmm, this gpiod_set_value_cansleep call should probably happen
* inside snd_soc_dapm_mixer_update_power in the loop.
*/
gpiod_set_value_cansleep(tse850->add, connect);
tse850->add_cache = connect;
snd_soc_dapm_mixer_update_power(dapm, kctrl, connect, NULL);
return 1;
}
static int tse850_get_ana(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
int ret;
ret = regulator_get_voltage(tse850->ana);
if (ret < 0)
return ret;
/*
* Map regulator output values like so:
* -11.5V to "Low" (enum 0)
* 11.5V-12.5V to "12V" (enum 1)
* 12.5V-13.5V to "13V" (enum 2)
* ...
* 18.5V-19.5V to "19V" (enum 8)
* 19.5V- to "20V" (enum 9)
*/
if (ret < 11000000)
ret = 11000000;
else if (ret > 20000000)
ret = 20000000;
ret -= 11000000;
ret = (ret + 500000) / 1000000;
ucontrol->value.enumerated.item[0] = ret;
return 0;
}
static int tse850_put_ana(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
struct soc_enum *e = (struct soc_enum *)kctrl->private_value;
unsigned int uV = ucontrol->value.enumerated.item[0];
int ret;
if (uV >= e->items)
return -EINVAL;
/*
* Map enum zero (Low) to 2 volts on the regulator, do this since
* the ana regulator is supplied by the system 12V voltage and
* requesting anything below the system voltage causes the system
* voltage to be passed through the regulator. Also, the ana
* regulator induces noise when requesting voltages near the
* system voltage. So, by mapping Low to 2V, that noise is
* eliminated when all that is needed is 12V (the system voltage).
*/
if (uV)
uV = 11000000 + (1000000 * uV);
else
uV = 2000000;
ret = regulator_set_voltage(tse850->ana, uV, uV);
if (ret < 0)
return ret;
return snd_soc_dapm_put_enum_double(kctrl, ucontrol);
}
static const char * const mux_text[] = { "Mixer", "Loop" };
static const struct soc_enum mux_enum =
SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, ARRAY_SIZE(mux_text), mux_text);
static const struct snd_kcontrol_new mux1 =
SOC_DAPM_ENUM_EXT("MUX1", mux_enum, tse850_get_mux1, tse850_put_mux1);
static const struct snd_kcontrol_new mux2 =
SOC_DAPM_ENUM_EXT("MUX2", mux_enum, tse850_get_mux2, tse850_put_mux2);
#define TSE850_DAPM_SINGLE_EXT(xname, reg, shift, max, invert, xget, xput) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_volsw, \
.get = xget, \
.put = xput, \
.private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) }
static const struct snd_kcontrol_new mix[] = {
TSE850_DAPM_SINGLE_EXT("IN Switch", SND_SOC_NOPM, 0, 1, 0,
tse850_get_mix, tse850_put_mix),
};
static const char * const ana_text[] = {
"Low", "12V", "13V", "14V", "15V", "16V", "17V", "18V", "19V", "20V"
};
static const struct soc_enum ana_enum =
SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, ARRAY_SIZE(ana_text), ana_text);
static const struct snd_kcontrol_new out =
SOC_DAPM_ENUM_EXT("ANA", ana_enum, tse850_get_ana, tse850_put_ana);
static const struct snd_soc_dapm_widget tse850_dapm_widgets[] = {
SND_SOC_DAPM_LINE("OUT1", NULL),
SND_SOC_DAPM_LINE("OUT2", NULL),
SND_SOC_DAPM_LINE("IN1", NULL),
SND_SOC_DAPM_LINE("IN2", NULL),
SND_SOC_DAPM_INPUT("DAC"),
SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
SOC_MIXER_ARRAY("MIX", SND_SOC_NOPM, 0, 0, mix),
SND_SOC_DAPM_MUX("MUX1", SND_SOC_NOPM, 0, 0, &mux1),
SND_SOC_DAPM_MUX("MUX2", SND_SOC_NOPM, 0, 0, &mux2),
SND_SOC_DAPM_OUT_DRV("OUT", SND_SOC_NOPM, 0, 0, &out, 1),
};
/*
* These connections are not entirely correct, since both IN1 and IN2
* are always fed to MIX (if the "IN switch" is set so), i.e. without
* regard to the loop1 and loop2 relays that according to this only
* control MUX1 and MUX2 but in fact also control how the input signals
* are routed.
* But, 1) I don't know how to do it right, and 2) it doesn't seem to
* matter in practice since nothing is powered in those sections anyway.
*/
static const struct snd_soc_dapm_route tse850_intercon[] = {
{ "OUT1", NULL, "MUX1" },
{ "OUT2", NULL, "MUX2" },
{ "MUX1", "Loop", "IN1" },
{ "MUX1", "Mixer", "OUT" },
{ "MUX2", "Loop", "IN2" },
{ "MUX2", "Mixer", "OUT" },
{ "OUT", NULL, "MIX" },
{ "MIX", NULL, "DAC" },
{ "MIX", "IN Switch", "IN1" },
{ "MIX", "IN Switch", "IN2" },
/* connect board input to the codec left channel output pin */
{ "DAC", NULL, "OUTL" },
};
SND_SOC_DAILINK_DEFS(pcm,
DAILINK_COMP_ARRAY(COMP_EMPTY()),
DAILINK_COMP_ARRAY(COMP_CODEC(NULL, "pcm512x-hifi")),
DAILINK_COMP_ARRAY(COMP_EMPTY()));
static struct snd_soc_dai_link tse850_dailink = {
.name = "TSE-850",
.stream_name = "TSE-850-PCM",
.dai_fmt = SND_SOC_DAIFMT_I2S
| SND_SOC_DAIFMT_NB_NF
| SND_SOC_DAIFMT_CBM_CFS,
SND_SOC_DAILINK_REG(pcm),
};
static struct snd_soc_card tse850_card = {
.name = "TSE-850-ASoC",
.owner = THIS_MODULE,
.dai_link = &tse850_dailink,
.num_links = 1,
.dapm_widgets = tse850_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(tse850_dapm_widgets),
.dapm_routes = tse850_intercon,
.num_dapm_routes = ARRAY_SIZE(tse850_intercon),
.fully_routed = true,
};
static int tse850_dt_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct device_node *codec_np, *cpu_np;
struct snd_soc_dai_link *dailink = &tse850_dailink;
if (!np) {
dev_err(&pdev->dev, "only device tree supported\n");
return -EINVAL;
}
cpu_np = of_parse_phandle(np, "axentia,cpu-dai", 0);
if (!cpu_np) {
dev_err(&pdev->dev, "failed to get cpu dai\n");
return -EINVAL;
}
dailink->cpus->of_node = cpu_np;
dailink->platforms->of_node = cpu_np;
of_node_put(cpu_np);
codec_np = of_parse_phandle(np, "axentia,audio-codec", 0);
if (!codec_np) {
dev_err(&pdev->dev, "failed to get codec info\n");
return -EINVAL;
}
dailink->codecs->of_node = codec_np;
of_node_put(codec_np);
return 0;
}
static int tse850_probe(struct platform_device *pdev)
{
struct snd_soc_card *card = &tse850_card;
struct device *dev = card->dev = &pdev->dev;
struct tse850_priv *tse850;
int ret;
tse850 = devm_kzalloc(dev, sizeof(*tse850), GFP_KERNEL);
if (!tse850)
return -ENOMEM;
snd_soc_card_set_drvdata(card, tse850);
ret = tse850_dt_init(pdev);
if (ret) {
dev_err(dev, "failed to init dt info\n");
return ret;
}
tse850->add = devm_gpiod_get(dev, "axentia,add", GPIOD_OUT_HIGH);
if (IS_ERR(tse850->add)) {
if (PTR_ERR(tse850->add) != -EPROBE_DEFER)
dev_err(dev, "failed to get 'add' gpio\n");
return PTR_ERR(tse850->add);
}
tse850->add_cache = 1;
tse850->loop1 = devm_gpiod_get(dev, "axentia,loop1", GPIOD_OUT_HIGH);
if (IS_ERR(tse850->loop1)) {
if (PTR_ERR(tse850->loop1) != -EPROBE_DEFER)
dev_err(dev, "failed to get 'loop1' gpio\n");
return PTR_ERR(tse850->loop1);
}
tse850->loop1_cache = 1;
tse850->loop2 = devm_gpiod_get(dev, "axentia,loop2", GPIOD_OUT_HIGH);
if (IS_ERR(tse850->loop2)) {
if (PTR_ERR(tse850->loop2) != -EPROBE_DEFER)
dev_err(dev, "failed to get 'loop2' gpio\n");
return PTR_ERR(tse850->loop2);
}
tse850->loop2_cache = 1;
tse850->ana = devm_regulator_get(dev, "axentia,ana");
if (IS_ERR(tse850->ana)) {
if (PTR_ERR(tse850->ana) != -EPROBE_DEFER)
dev_err(dev, "failed to get 'ana' regulator\n");
return PTR_ERR(tse850->ana);
}
ret = regulator_enable(tse850->ana);
if (ret < 0) {
dev_err(dev, "failed to enable the 'ana' regulator\n");
return ret;
}
ret = snd_soc_register_card(card);
if (ret) {
dev_err(dev, "snd_soc_register_card failed\n");
goto err_disable_ana;
}
return 0;
err_disable_ana:
regulator_disable(tse850->ana);
return ret;
}
static int tse850_remove(struct platform_device *pdev)
{
struct snd_soc_card *card = platform_get_drvdata(pdev);
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
snd_soc_unregister_card(card);
regulator_disable(tse850->ana);
return 0;
}
static const struct of_device_id tse850_dt_ids[] = {
{ .compatible = "axentia,tse850-pcm5142", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, tse850_dt_ids);
static struct platform_driver tse850_driver = {
.driver = {
.name = "axentia-tse850-pcm5142",
.of_match_table = of_match_ptr(tse850_dt_ids),
},
.probe = tse850_probe,
.remove = tse850_remove,
};
module_platform_driver(tse850_driver);
/* Module information */
MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
MODULE_DESCRIPTION("ALSA SoC driver for TSE-850 with PCM5142 codec");
MODULE_LICENSE("GPL v2");