linux/drivers/mfd/wm8994-irq.c
Mark Brown 7a97637988 mfd: wm8994: Flag the interrupt block as requiring runtime PM be enabled
It's only required in a few circumstances but better to be safe.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-07 20:30:00 +01:00

178 lines
3.9 KiB
C

/*
* wm8994-irq.c -- Interrupt controller support for Wolfson WM8994
*
* Copyright 2010 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/mfd/core.h>
#include <linux/interrupt.h>
#include <linux/regmap.h>
#include <linux/mfd/wm8994/core.h>
#include <linux/mfd/wm8994/pdata.h>
#include <linux/mfd/wm8994/registers.h>
#include <linux/delay.h>
static struct regmap_irq wm8994_irqs[] = {
[WM8994_IRQ_TEMP_SHUT] = {
.reg_offset = 1,
.mask = WM8994_TEMP_SHUT_EINT,
},
[WM8994_IRQ_MIC1_DET] = {
.reg_offset = 1,
.mask = WM8994_MIC1_DET_EINT,
},
[WM8994_IRQ_MIC1_SHRT] = {
.reg_offset = 1,
.mask = WM8994_MIC1_SHRT_EINT,
},
[WM8994_IRQ_MIC2_DET] = {
.reg_offset = 1,
.mask = WM8994_MIC2_DET_EINT,
},
[WM8994_IRQ_MIC2_SHRT] = {
.reg_offset = 1,
.mask = WM8994_MIC2_SHRT_EINT,
},
[WM8994_IRQ_FLL1_LOCK] = {
.reg_offset = 1,
.mask = WM8994_FLL1_LOCK_EINT,
},
[WM8994_IRQ_FLL2_LOCK] = {
.reg_offset = 1,
.mask = WM8994_FLL2_LOCK_EINT,
},
[WM8994_IRQ_SRC1_LOCK] = {
.reg_offset = 1,
.mask = WM8994_SRC1_LOCK_EINT,
},
[WM8994_IRQ_SRC2_LOCK] = {
.reg_offset = 1,
.mask = WM8994_SRC2_LOCK_EINT,
},
[WM8994_IRQ_AIF1DRC1_SIG_DET] = {
.reg_offset = 1,
.mask = WM8994_AIF1DRC1_SIG_DET,
},
[WM8994_IRQ_AIF1DRC2_SIG_DET] = {
.reg_offset = 1,
.mask = WM8994_AIF1DRC2_SIG_DET_EINT,
},
[WM8994_IRQ_AIF2DRC_SIG_DET] = {
.reg_offset = 1,
.mask = WM8994_AIF2DRC_SIG_DET_EINT,
},
[WM8994_IRQ_FIFOS_ERR] = {
.reg_offset = 1,
.mask = WM8994_FIFOS_ERR_EINT,
},
[WM8994_IRQ_WSEQ_DONE] = {
.reg_offset = 1,
.mask = WM8994_WSEQ_DONE_EINT,
},
[WM8994_IRQ_DCS_DONE] = {
.reg_offset = 1,
.mask = WM8994_DCS_DONE_EINT,
},
[WM8994_IRQ_TEMP_WARN] = {
.reg_offset = 1,
.mask = WM8994_TEMP_WARN_EINT,
},
[WM8994_IRQ_GPIO(1)] = {
.mask = WM8994_GP1_EINT,
},
[WM8994_IRQ_GPIO(2)] = {
.mask = WM8994_GP2_EINT,
},
[WM8994_IRQ_GPIO(3)] = {
.mask = WM8994_GP3_EINT,
},
[WM8994_IRQ_GPIO(4)] = {
.mask = WM8994_GP4_EINT,
},
[WM8994_IRQ_GPIO(5)] = {
.mask = WM8994_GP5_EINT,
},
[WM8994_IRQ_GPIO(6)] = {
.mask = WM8994_GP6_EINT,
},
[WM8994_IRQ_GPIO(7)] = {
.mask = WM8994_GP7_EINT,
},
[WM8994_IRQ_GPIO(8)] = {
.mask = WM8994_GP8_EINT,
},
[WM8994_IRQ_GPIO(9)] = {
.mask = WM8994_GP8_EINT,
},
[WM8994_IRQ_GPIO(10)] = {
.mask = WM8994_GP10_EINT,
},
[WM8994_IRQ_GPIO(11)] = {
.mask = WM8994_GP11_EINT,
},
};
static struct regmap_irq_chip wm8994_irq_chip = {
.name = "wm8994",
.irqs = wm8994_irqs,
.num_irqs = ARRAY_SIZE(wm8994_irqs),
.num_regs = 2,
.status_base = WM8994_INTERRUPT_STATUS_1,
.mask_base = WM8994_INTERRUPT_STATUS_1_MASK,
.ack_base = WM8994_INTERRUPT_STATUS_1,
.runtime_pm = true,
};
int wm8994_irq_init(struct wm8994 *wm8994)
{
int ret;
unsigned long irqflags;
struct wm8994_pdata *pdata = wm8994->dev->platform_data;
if (!wm8994->irq) {
dev_warn(wm8994->dev,
"No interrupt specified, no interrupts\n");
wm8994->irq_base = 0;
return 0;
}
/* select user or default irq flags */
irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
if (pdata->irq_flags)
irqflags = pdata->irq_flags;
ret = regmap_add_irq_chip(wm8994->regmap, wm8994->irq,
irqflags,
wm8994->irq_base, &wm8994_irq_chip,
&wm8994->irq_data);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to register IRQ chip: %d\n", ret);
return ret;
}
/* Enable top level interrupt if it was masked */
wm8994_reg_write(wm8994, WM8994_INTERRUPT_CONTROL, 0);
return 0;
}
void wm8994_irq_exit(struct wm8994 *wm8994)
{
regmap_del_irq_chip(wm8994->irq, wm8994->irq_data);
}