linux/Documentation/devicetree/bindings/dma/k3dma.txt
Youlin Wang 50fdb52a7c Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp
Extend the k3dma driver binding to support hisi-asp hardware
variants.

Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Zhuangluan Su <suzhuangluan@hisilicon.com>
Cc: Tanglei Han <hantanglei@huawei.com>
Cc: Ryan Grachek <ryan@edited.us>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: dmaengine@vger.kernel.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Youlin Wang <wwx575822@notesmail.huawei.com>
Signed-off-by: Tanglei Han <hantanglei@huawei.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-02-04 14:30:28 +05:30

48 lines
1.2 KiB
Plaintext

* Hisilicon K3 DMA controller
See dma.txt first
Required properties:
- compatible: Must be one of
- "hisilicon,k3-dma-1.0"
- "hisilicon,hisi-pcm-asp-dma-1.0"
- reg: Should contain DMA registers location and length.
- interrupts: Should contain one interrupt shared by all channel
- #dma-cells: see dma.txt, should be 1, para number
- dma-channels: physical channels supported
- dma-requests: virtual channels supported, each virtual channel
have specific request line
- clocks: clock required
Example:
Controller:
dma0: dma@fcd02000 {
compatible = "hisilicon,k3-dma-1.0";
reg = <0xfcd02000 0x1000>;
#dma-cells = <1>;
dma-channels = <16>;
dma-requests = <27>;
interrupts = <0 12 4>;
clocks = <&pclk>;
};
Client:
Use specific request line passing from dmax
For example, i2c0 read channel request line is 18, while write channel use 19
i2c0: i2c@fcb08000 {
compatible = "snps,designware-i2c";
dmas = <&dma0 18 /* read channel */
&dma0 19>; /* write channel */
dma-names = "rx", "tx";
};
i2c1: i2c@fcb09000 {
compatible = "snps,designware-i2c";
dmas = <&dma0 20 /* read channel */
&dma0 21>; /* write channel */
dma-names = "rx", "tx";
};