linux/drivers/s390/char/tape_3590.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

1760 lines
45 KiB
C

/*
* drivers/s390/char/tape_3590.c
* tape device discipline for 3590 tapes.
*
* Copyright IBM Corp. 2001, 2009
* Author(s): Stefan Bader <shbader@de.ibm.com>
* Michael Holzheu <holzheu@de.ibm.com>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
#define KMSG_COMPONENT "tape_3590"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/bio.h>
#include <asm/ebcdic.h>
#define TAPE_DBF_AREA tape_3590_dbf
#define BUFSIZE 512 /* size of buffers for dynamic generated messages */
#include "tape.h"
#include "tape_std.h"
#include "tape_3590.h"
/*
* Pointer to debug area.
*/
debug_info_t *TAPE_DBF_AREA = NULL;
EXPORT_SYMBOL(TAPE_DBF_AREA);
/*******************************************************************
* Error Recovery fuctions:
* - Read Opposite: implemented
* - Read Device (buffered) log: BRA
* - Read Library log: BRA
* - Swap Devices: BRA
* - Long Busy: implemented
* - Special Intercept: BRA
* - Read Alternate: implemented
*******************************************************************/
static const char *tape_3590_msg[TAPE_3590_MAX_MSG] = {
[0x00] = "",
[0x10] = "Lost Sense",
[0x11] = "Assigned Elsewhere",
[0x12] = "Allegiance Reset",
[0x13] = "Shared Access Violation",
[0x20] = "Command Reject",
[0x21] = "Configuration Error",
[0x22] = "Protection Exception",
[0x23] = "Write Protect",
[0x24] = "Write Length",
[0x25] = "Read-Only Format",
[0x31] = "Beginning of Partition",
[0x33] = "End of Partition",
[0x34] = "End of Data",
[0x35] = "Block not found",
[0x40] = "Device Intervention",
[0x41] = "Loader Intervention",
[0x42] = "Library Intervention",
[0x50] = "Write Error",
[0x51] = "Erase Error",
[0x52] = "Formatting Error",
[0x53] = "Read Error",
[0x54] = "Unsupported Format",
[0x55] = "No Formatting",
[0x56] = "Positioning lost",
[0x57] = "Read Length",
[0x60] = "Unsupported Medium",
[0x61] = "Medium Length Error",
[0x62] = "Medium removed",
[0x64] = "Load Check",
[0x65] = "Unload Check",
[0x70] = "Equipment Check",
[0x71] = "Bus out Check",
[0x72] = "Protocol Error",
[0x73] = "Interface Error",
[0x74] = "Overrun",
[0x75] = "Halt Signal",
[0x90] = "Device fenced",
[0x91] = "Device Path fenced",
[0xa0] = "Volume misplaced",
[0xa1] = "Volume inaccessible",
[0xa2] = "Volume in input",
[0xa3] = "Volume ejected",
[0xa4] = "All categories reserved",
[0xa5] = "Duplicate Volume",
[0xa6] = "Library Manager Offline",
[0xa7] = "Library Output Station full",
[0xa8] = "Vision System non-operational",
[0xa9] = "Library Manager Equipment Check",
[0xaa] = "Library Equipment Check",
[0xab] = "All Library Cells full",
[0xac] = "No Cleaner Volumes in Library",
[0xad] = "I/O Station door open",
[0xae] = "Subsystem environmental alert",
};
static int crypt_supported(struct tape_device *device)
{
return TAPE390_CRYPT_SUPPORTED(TAPE_3590_CRYPT_INFO(device));
}
static int crypt_enabled(struct tape_device *device)
{
return TAPE390_CRYPT_ON(TAPE_3590_CRYPT_INFO(device));
}
static void ext_to_int_kekl(struct tape390_kekl *in,
struct tape3592_kekl *out)
{
int i;
memset(out, 0, sizeof(*out));
if (in->type == TAPE390_KEKL_TYPE_HASH)
out->flags |= 0x40;
if (in->type_on_tape == TAPE390_KEKL_TYPE_HASH)
out->flags |= 0x80;
strncpy(out->label, in->label, 64);
for (i = strlen(in->label); i < sizeof(out->label); i++)
out->label[i] = ' ';
ASCEBC(out->label, sizeof(out->label));
}
static void int_to_ext_kekl(struct tape3592_kekl *in,
struct tape390_kekl *out)
{
memset(out, 0, sizeof(*out));
if(in->flags & 0x40)
out->type = TAPE390_KEKL_TYPE_HASH;
else
out->type = TAPE390_KEKL_TYPE_LABEL;
if(in->flags & 0x80)
out->type_on_tape = TAPE390_KEKL_TYPE_HASH;
else
out->type_on_tape = TAPE390_KEKL_TYPE_LABEL;
memcpy(out->label, in->label, sizeof(in->label));
EBCASC(out->label, sizeof(in->label));
strim(out->label);
}
static void int_to_ext_kekl_pair(struct tape3592_kekl_pair *in,
struct tape390_kekl_pair *out)
{
if (in->count == 0) {
out->kekl[0].type = TAPE390_KEKL_TYPE_NONE;
out->kekl[0].type_on_tape = TAPE390_KEKL_TYPE_NONE;
out->kekl[1].type = TAPE390_KEKL_TYPE_NONE;
out->kekl[1].type_on_tape = TAPE390_KEKL_TYPE_NONE;
} else if (in->count == 1) {
int_to_ext_kekl(&in->kekl[0], &out->kekl[0]);
out->kekl[1].type = TAPE390_KEKL_TYPE_NONE;
out->kekl[1].type_on_tape = TAPE390_KEKL_TYPE_NONE;
} else if (in->count == 2) {
int_to_ext_kekl(&in->kekl[0], &out->kekl[0]);
int_to_ext_kekl(&in->kekl[1], &out->kekl[1]);
} else {
printk("Invalid KEKL number: %d\n", in->count);
BUG();
}
}
static int check_ext_kekl(struct tape390_kekl *kekl)
{
if (kekl->type == TAPE390_KEKL_TYPE_NONE)
goto invalid;
if (kekl->type > TAPE390_KEKL_TYPE_HASH)
goto invalid;
if (kekl->type_on_tape == TAPE390_KEKL_TYPE_NONE)
goto invalid;
if (kekl->type_on_tape > TAPE390_KEKL_TYPE_HASH)
goto invalid;
if ((kekl->type == TAPE390_KEKL_TYPE_HASH) &&
(kekl->type_on_tape == TAPE390_KEKL_TYPE_LABEL))
goto invalid;
return 0;
invalid:
return -EINVAL;
}
static int check_ext_kekl_pair(struct tape390_kekl_pair *kekls)
{
if (check_ext_kekl(&kekls->kekl[0]))
goto invalid;
if (check_ext_kekl(&kekls->kekl[1]))
goto invalid;
return 0;
invalid:
return -EINVAL;
}
/*
* Query KEKLs
*/
static int tape_3592_kekl_query(struct tape_device *device,
struct tape390_kekl_pair *ext_kekls)
{
struct tape_request *request;
struct tape3592_kekl_query_order *order;
struct tape3592_kekl_query_data *int_kekls;
int rc;
DBF_EVENT(6, "tape3592_kekl_query\n");
int_kekls = kmalloc(sizeof(*int_kekls), GFP_KERNEL|GFP_DMA);
if (!int_kekls)
return -ENOMEM;
request = tape_alloc_request(2, sizeof(*order));
if (IS_ERR(request)) {
rc = PTR_ERR(request);
goto fail_malloc;
}
order = request->cpdata;
memset(order,0,sizeof(*order));
order->code = 0xe2;
order->max_count = 2;
request->op = TO_KEKL_QUERY;
tape_ccw_cc(request->cpaddr, PERF_SUBSYS_FUNC, sizeof(*order), order);
tape_ccw_end(request->cpaddr + 1, READ_SS_DATA, sizeof(*int_kekls),
int_kekls);
rc = tape_do_io(device, request);
if (rc)
goto fail_request;
int_to_ext_kekl_pair(&int_kekls->kekls, ext_kekls);
rc = 0;
fail_request:
tape_free_request(request);
fail_malloc:
kfree(int_kekls);
return rc;
}
/*
* IOCTL: Query KEKLs
*/
static int tape_3592_ioctl_kekl_query(struct tape_device *device,
unsigned long arg)
{
int rc;
struct tape390_kekl_pair *ext_kekls;
DBF_EVENT(6, "tape_3592_ioctl_kekl_query\n");
if (!crypt_supported(device))
return -ENOSYS;
if (!crypt_enabled(device))
return -EUNATCH;
ext_kekls = kmalloc(sizeof(*ext_kekls), GFP_KERNEL);
if (!ext_kekls)
return -ENOMEM;
rc = tape_3592_kekl_query(device, ext_kekls);
if (rc != 0)
goto fail;
if (copy_to_user((char __user *) arg, ext_kekls, sizeof(*ext_kekls))) {
rc = -EFAULT;
goto fail;
}
rc = 0;
fail:
kfree(ext_kekls);
return rc;
}
static int tape_3590_mttell(struct tape_device *device, int mt_count);
/*
* Set KEKLs
*/
static int tape_3592_kekl_set(struct tape_device *device,
struct tape390_kekl_pair *ext_kekls)
{
struct tape_request *request;
struct tape3592_kekl_set_order *order;
DBF_EVENT(6, "tape3592_kekl_set\n");
if (check_ext_kekl_pair(ext_kekls)) {
DBF_EVENT(6, "invalid kekls\n");
return -EINVAL;
}
if (tape_3590_mttell(device, 0) != 0)
return -EBADSLT;
request = tape_alloc_request(1, sizeof(*order));
if (IS_ERR(request))
return PTR_ERR(request);
order = request->cpdata;
memset(order, 0, sizeof(*order));
order->code = 0xe3;
order->kekls.count = 2;
ext_to_int_kekl(&ext_kekls->kekl[0], &order->kekls.kekl[0]);
ext_to_int_kekl(&ext_kekls->kekl[1], &order->kekls.kekl[1]);
request->op = TO_KEKL_SET;
tape_ccw_end(request->cpaddr, PERF_SUBSYS_FUNC, sizeof(*order), order);
return tape_do_io_free(device, request);
}
/*
* IOCTL: Set KEKLs
*/
static int tape_3592_ioctl_kekl_set(struct tape_device *device,
unsigned long arg)
{
int rc;
struct tape390_kekl_pair *ext_kekls;
DBF_EVENT(6, "tape_3592_ioctl_kekl_set\n");
if (!crypt_supported(device))
return -ENOSYS;
if (!crypt_enabled(device))
return -EUNATCH;
ext_kekls = kmalloc(sizeof(*ext_kekls), GFP_KERNEL);
if (!ext_kekls)
return -ENOMEM;
if (copy_from_user(ext_kekls, (char __user *)arg, sizeof(*ext_kekls))) {
rc = -EFAULT;
goto out;
}
rc = tape_3592_kekl_set(device, ext_kekls);
out:
kfree(ext_kekls);
return rc;
}
/*
* Enable encryption
*/
static int tape_3592_enable_crypt(struct tape_device *device)
{
struct tape_request *request;
char *data;
DBF_EVENT(6, "tape_3592_enable_crypt\n");
if (!crypt_supported(device))
return -ENOSYS;
request = tape_alloc_request(2, 72);
if (IS_ERR(request))
return PTR_ERR(request);
data = request->cpdata;
memset(data,0,72);
data[0] = 0x05;
data[36 + 0] = 0x03;
data[36 + 1] = 0x03;
data[36 + 4] = 0x40;
data[36 + 6] = 0x01;
data[36 + 14] = 0x2f;
data[36 + 18] = 0xc3;
data[36 + 35] = 0x72;
request->op = TO_CRYPT_ON;
tape_ccw_cc(request->cpaddr, MODE_SET_CB, 36, data);
tape_ccw_end(request->cpaddr + 1, MODE_SET_CB, 36, data + 36);
return tape_do_io_free(device, request);
}
/*
* Disable encryption
*/
static int tape_3592_disable_crypt(struct tape_device *device)
{
struct tape_request *request;
char *data;
DBF_EVENT(6, "tape_3592_disable_crypt\n");
if (!crypt_supported(device))
return -ENOSYS;
request = tape_alloc_request(2, 72);
if (IS_ERR(request))
return PTR_ERR(request);
data = request->cpdata;
memset(data,0,72);
data[0] = 0x05;
data[36 + 0] = 0x03;
data[36 + 1] = 0x03;
data[36 + 35] = 0x32;
request->op = TO_CRYPT_OFF;
tape_ccw_cc(request->cpaddr, MODE_SET_CB, 36, data);
tape_ccw_end(request->cpaddr + 1, MODE_SET_CB, 36, data + 36);
return tape_do_io_free(device, request);
}
/*
* IOCTL: Set encryption status
*/
static int tape_3592_ioctl_crypt_set(struct tape_device *device,
unsigned long arg)
{
struct tape390_crypt_info info;
DBF_EVENT(6, "tape_3592_ioctl_crypt_set\n");
if (!crypt_supported(device))
return -ENOSYS;
if (copy_from_user(&info, (char __user *)arg, sizeof(info)))
return -EFAULT;
if (info.status & ~TAPE390_CRYPT_ON_MASK)
return -EINVAL;
if (info.status & TAPE390_CRYPT_ON_MASK)
return tape_3592_enable_crypt(device);
else
return tape_3592_disable_crypt(device);
}
static int tape_3590_sense_medium(struct tape_device *device);
/*
* IOCTL: Query enryption status
*/
static int tape_3592_ioctl_crypt_query(struct tape_device *device,
unsigned long arg)
{
DBF_EVENT(6, "tape_3592_ioctl_crypt_query\n");
if (!crypt_supported(device))
return -ENOSYS;
tape_3590_sense_medium(device);
if (copy_to_user((char __user *) arg, &TAPE_3590_CRYPT_INFO(device),
sizeof(TAPE_3590_CRYPT_INFO(device))))
return -EFAULT;
else
return 0;
}
/*
* 3590 IOCTL Overload
*/
static int
tape_3590_ioctl(struct tape_device *device, unsigned int cmd, unsigned long arg)
{
switch (cmd) {
case TAPE390_DISPLAY: {
struct display_struct disp;
if (copy_from_user(&disp, (char __user *) arg, sizeof(disp)))
return -EFAULT;
return tape_std_display(device, &disp);
}
case TAPE390_KEKL_SET:
return tape_3592_ioctl_kekl_set(device, arg);
case TAPE390_KEKL_QUERY:
return tape_3592_ioctl_kekl_query(device, arg);
case TAPE390_CRYPT_SET:
return tape_3592_ioctl_crypt_set(device, arg);
case TAPE390_CRYPT_QUERY:
return tape_3592_ioctl_crypt_query(device, arg);
default:
return -EINVAL; /* no additional ioctls */
}
}
/*
* SENSE Medium: Get Sense data about medium state
*/
static int
tape_3590_sense_medium(struct tape_device *device)
{
struct tape_request *request;
request = tape_alloc_request(1, 128);
if (IS_ERR(request))
return PTR_ERR(request);
request->op = TO_MSEN;
tape_ccw_end(request->cpaddr, MEDIUM_SENSE, 128, request->cpdata);
return tape_do_io_free(device, request);
}
/*
* MTTELL: Tell block. Return the number of block relative to current file.
*/
static int
tape_3590_mttell(struct tape_device *device, int mt_count)
{
__u64 block_id;
int rc;
rc = tape_std_read_block_id(device, &block_id);
if (rc)
return rc;
return block_id >> 32;
}
/*
* MTSEEK: seek to the specified block.
*/
static int
tape_3590_mtseek(struct tape_device *device, int count)
{
struct tape_request *request;
DBF_EVENT(6, "xsee id: %x\n", count);
request = tape_alloc_request(3, 4);
if (IS_ERR(request))
return PTR_ERR(request);
request->op = TO_LBL;
tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
*(__u32 *) request->cpdata = count;
tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata);
tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL);
return tape_do_io_free(device, request);
}
/*
* Read Opposite Error Recovery Function:
* Used, when Read Forward does not work
*/
static void
tape_3590_read_opposite(struct tape_device *device,
struct tape_request *request)
{
struct tape_3590_disc_data *data;
/*
* We have allocated 4 ccws in tape_std_read, so we can now
* transform the request to a read backward, followed by a
* forward space block.
*/
request->op = TO_RBA;
tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
data = device->discdata;
tape_ccw_cc_idal(request->cpaddr + 1, data->read_back_op,
device->char_data.idal_buf);
tape_ccw_cc(request->cpaddr + 2, FORSPACEBLOCK, 0, NULL);
tape_ccw_end(request->cpaddr + 3, NOP, 0, NULL);
DBF_EVENT(6, "xrop ccwg\n");
}
/*
* Read Attention Msg
* This should be done after an interrupt with attention bit (0x80)
* in device state.
*
* After a "read attention message" request there are two possible
* results:
*
* 1. A unit check is presented, when attention sense is present (e.g. when
* a medium has been unloaded). The attention sense comes then
* together with the unit check. The recovery action is either "retry"
* (in case there is an attention message pending) or "permanent error".
*
* 2. The attention msg is written to the "read subsystem data" buffer.
* In this case we probably should print it to the console.
*/
static int
tape_3590_read_attmsg(struct tape_device *device)
{
struct tape_request *request;
char *buf;
request = tape_alloc_request(3, 4096);
if (IS_ERR(request))
return PTR_ERR(request);
request->op = TO_READ_ATTMSG;
buf = request->cpdata;
buf[0] = PREP_RD_SS_DATA;
buf[6] = RD_ATTMSG; /* read att msg */
tape_ccw_cc(request->cpaddr, PERFORM_SS_FUNC, 12, buf);
tape_ccw_cc(request->cpaddr + 1, READ_SS_DATA, 4096 - 12, buf + 12);
tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL);
return tape_do_io_free(device, request);
}
/*
* These functions are used to schedule follow-up actions from within an
* interrupt context (like unsolicited interrupts).
*/
struct work_handler_data {
struct tape_device *device;
enum tape_op op;
struct work_struct work;
};
static void
tape_3590_work_handler(struct work_struct *work)
{
struct work_handler_data *p =
container_of(work, struct work_handler_data, work);
switch (p->op) {
case TO_MSEN:
tape_3590_sense_medium(p->device);
break;
case TO_READ_ATTMSG:
tape_3590_read_attmsg(p->device);
break;
case TO_CRYPT_ON:
tape_3592_enable_crypt(p->device);
break;
case TO_CRYPT_OFF:
tape_3592_disable_crypt(p->device);
break;
default:
DBF_EVENT(3, "T3590: work handler undefined for "
"operation 0x%02x\n", p->op);
}
tape_put_device(p->device);
kfree(p);
}
static int
tape_3590_schedule_work(struct tape_device *device, enum tape_op op)
{
struct work_handler_data *p;
if ((p = kzalloc(sizeof(*p), GFP_ATOMIC)) == NULL)
return -ENOMEM;
INIT_WORK(&p->work, tape_3590_work_handler);
p->device = tape_get_device(device);
p->op = op;
schedule_work(&p->work);
return 0;
}
#ifdef CONFIG_S390_TAPE_BLOCK
/*
* Tape Block READ
*/
static struct tape_request *
tape_3590_bread(struct tape_device *device, struct request *req)
{
struct tape_request *request;
struct ccw1 *ccw;
int count = 0, start_block;
unsigned off;
char *dst;
struct bio_vec *bv;
struct req_iterator iter;
DBF_EVENT(6, "xBREDid:");
start_block = blk_rq_pos(req) >> TAPEBLOCK_HSEC_S2B;
DBF_EVENT(6, "start_block = %i\n", start_block);
rq_for_each_segment(bv, req, iter)
count += bv->bv_len >> (TAPEBLOCK_HSEC_S2B + 9);
request = tape_alloc_request(2 + count + 1, 4);
if (IS_ERR(request))
return request;
request->op = TO_BLOCK;
*(__u32 *) request->cpdata = start_block;
ccw = request->cpaddr;
ccw = tape_ccw_cc(ccw, MODE_SET_DB, 1, device->modeset_byte);
/*
* We always setup a nop after the mode set ccw. This slot is
* used in tape_std_check_locate to insert a locate ccw if the
* current tape position doesn't match the start block to be read.
*/
ccw = tape_ccw_cc(ccw, NOP, 0, NULL);
rq_for_each_segment(bv, req, iter) {
dst = page_address(bv->bv_page) + bv->bv_offset;
for (off = 0; off < bv->bv_len; off += TAPEBLOCK_HSEC_SIZE) {
ccw->flags = CCW_FLAG_CC;
ccw->cmd_code = READ_FORWARD;
ccw->count = TAPEBLOCK_HSEC_SIZE;
set_normalized_cda(ccw, (void *) __pa(dst));
ccw++;
dst += TAPEBLOCK_HSEC_SIZE;
}
BUG_ON(off > bv->bv_len);
}
ccw = tape_ccw_end(ccw, NOP, 0, NULL);
DBF_EVENT(6, "xBREDccwg\n");
return request;
}
static void
tape_3590_free_bread(struct tape_request *request)
{
struct ccw1 *ccw;
/* Last ccw is a nop and doesn't need clear_normalized_cda */
for (ccw = request->cpaddr; ccw->flags & CCW_FLAG_CC; ccw++)
if (ccw->cmd_code == READ_FORWARD)
clear_normalized_cda(ccw);
tape_free_request(request);
}
/*
* check_locate is called just before the tape request is passed to
* the common io layer for execution. It has to check the current
* tape position and insert a locate ccw if it doesn't match the
* start block for the request.
*/
static void
tape_3590_check_locate(struct tape_device *device, struct tape_request *request)
{
__u32 *start_block;
start_block = (__u32 *) request->cpdata;
if (*start_block != device->blk_data.block_position) {
/* Add the start offset of the file to get the real block. */
*start_block += device->bof;
tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata);
}
}
#endif
static void tape_3590_med_state_set(struct tape_device *device,
struct tape_3590_med_sense *sense)
{
struct tape390_crypt_info *c_info;
c_info = &TAPE_3590_CRYPT_INFO(device);
DBF_EVENT(6, "medium state: %x:%x\n", sense->macst, sense->masst);
switch (sense->macst) {
case 0x04:
case 0x05:
case 0x06:
tape_med_state_set(device, MS_UNLOADED);
TAPE_3590_CRYPT_INFO(device).medium_status = 0;
return;
case 0x08:
case 0x09:
tape_med_state_set(device, MS_LOADED);
break;
default:
tape_med_state_set(device, MS_UNKNOWN);
return;
}
c_info->medium_status |= TAPE390_MEDIUM_LOADED_MASK;
if (sense->flags & MSENSE_CRYPT_MASK) {
DBF_EVENT(6, "Medium is encrypted (%04x)\n", sense->flags);
c_info->medium_status |= TAPE390_MEDIUM_ENCRYPTED_MASK;
} else {
DBF_EVENT(6, "Medium is not encrypted %04x\n", sense->flags);
c_info->medium_status &= ~TAPE390_MEDIUM_ENCRYPTED_MASK;
}
}
/*
* The done handler is called at device/channel end and wakes up the sleeping
* process
*/
static int
tape_3590_done(struct tape_device *device, struct tape_request *request)
{
struct tape_3590_disc_data *disc_data;
DBF_EVENT(6, "%s done\n", tape_op_verbose[request->op]);
disc_data = device->discdata;
switch (request->op) {
case TO_BSB:
case TO_BSF:
case TO_DSE:
case TO_FSB:
case TO_FSF:
case TO_LBL:
case TO_RFO:
case TO_RBA:
case TO_REW:
case TO_WRI:
case TO_WTM:
case TO_BLOCK:
case TO_LOAD:
tape_med_state_set(device, MS_LOADED);
break;
case TO_RUN:
tape_med_state_set(device, MS_UNLOADED);
tape_3590_schedule_work(device, TO_CRYPT_OFF);
break;
case TO_MSEN:
tape_3590_med_state_set(device, request->cpdata);
break;
case TO_CRYPT_ON:
TAPE_3590_CRYPT_INFO(device).status
|= TAPE390_CRYPT_ON_MASK;
*(device->modeset_byte) |= 0x03;
break;
case TO_CRYPT_OFF:
TAPE_3590_CRYPT_INFO(device).status
&= ~TAPE390_CRYPT_ON_MASK;
*(device->modeset_byte) &= ~0x03;
break;
case TO_RBI: /* RBI seems to succeed even without medium loaded. */
case TO_NOP: /* Same to NOP. */
case TO_READ_CONFIG:
case TO_READ_ATTMSG:
case TO_DIS:
case TO_ASSIGN:
case TO_UNASSIGN:
case TO_SIZE:
case TO_KEKL_SET:
case TO_KEKL_QUERY:
case TO_RDC:
break;
}
return TAPE_IO_SUCCESS;
}
/*
* This fuction is called, when error recovery was successfull
*/
static inline int
tape_3590_erp_succeded(struct tape_device *device, struct tape_request *request)
{
DBF_EVENT(3, "Error Recovery successful for %s\n",
tape_op_verbose[request->op]);
return tape_3590_done(device, request);
}
/*
* This fuction is called, when error recovery was not successfull
*/
static inline int
tape_3590_erp_failed(struct tape_device *device, struct tape_request *request,
struct irb *irb, int rc)
{
DBF_EVENT(3, "Error Recovery failed for %s\n",
tape_op_verbose[request->op]);
tape_dump_sense_dbf(device, request, irb);
return rc;
}
/*
* Error Recovery do retry
*/
static inline int
tape_3590_erp_retry(struct tape_device *device, struct tape_request *request,
struct irb *irb)
{
DBF_EVENT(2, "Retry: %s\n", tape_op_verbose[request->op]);
tape_dump_sense_dbf(device, request, irb);
return TAPE_IO_RETRY;
}
/*
* Handle unsolicited interrupts
*/
static int
tape_3590_unsolicited_irq(struct tape_device *device, struct irb *irb)
{
if (irb->scsw.cmd.dstat == DEV_STAT_CHN_END)
/* Probably result of halt ssch */
return TAPE_IO_PENDING;
else if (irb->scsw.cmd.dstat == 0x85)
/* Device Ready */
DBF_EVENT(3, "unsol.irq! tape ready: %08x\n", device->cdev_id);
else if (irb->scsw.cmd.dstat & DEV_STAT_ATTENTION) {
tape_3590_schedule_work(device, TO_READ_ATTMSG);
} else {
DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id);
tape_dump_sense_dbf(device, NULL, irb);
}
/* check medium state */
tape_3590_schedule_work(device, TO_MSEN);
return TAPE_IO_SUCCESS;
}
/*
* Basic Recovery routine
*/
static int
tape_3590_erp_basic(struct tape_device *device, struct tape_request *request,
struct irb *irb, int rc)
{
struct tape_3590_sense *sense;
sense = (struct tape_3590_sense *) irb->ecw;
switch (sense->bra) {
case SENSE_BRA_PER:
return tape_3590_erp_failed(device, request, irb, rc);
case SENSE_BRA_CONT:
return tape_3590_erp_succeded(device, request);
case SENSE_BRA_RE:
return tape_3590_erp_retry(device, request, irb);
case SENSE_BRA_DRE:
return tape_3590_erp_failed(device, request, irb, rc);
default:
BUG();
return TAPE_IO_STOP;
}
}
/*
* RDL: Read Device (buffered) log
*/
static int
tape_3590_erp_read_buf_log(struct tape_device *device,
struct tape_request *request, struct irb *irb)
{
/*
* We just do the basic error recovery at the moment (retry).
* Perhaps in the future, we read the log and dump it somewhere...
*/
return tape_3590_erp_basic(device, request, irb, -EIO);
}
/*
* SWAP: Swap Devices
*/
static int
tape_3590_erp_swap(struct tape_device *device, struct tape_request *request,
struct irb *irb)
{
/*
* This error recovery should swap the tapes
* if the original has a problem. The operation
* should proceed with the new tape... this
* should probably be done in user space!
*/
dev_warn (&device->cdev->dev, "The tape medium must be loaded into a "
"different tape unit\n");
return tape_3590_erp_basic(device, request, irb, -EIO);
}
/*
* LBY: Long Busy
*/
static int
tape_3590_erp_long_busy(struct tape_device *device,
struct tape_request *request, struct irb *irb)
{
DBF_EVENT(6, "Device is busy\n");
return TAPE_IO_LONG_BUSY;
}
/*
* SPI: Special Intercept
*/
static int
tape_3590_erp_special_interrupt(struct tape_device *device,
struct tape_request *request, struct irb *irb)
{
return tape_3590_erp_basic(device, request, irb, -EIO);
}
/*
* RDA: Read Alternate
*/
static int
tape_3590_erp_read_alternate(struct tape_device *device,
struct tape_request *request, struct irb *irb)
{
struct tape_3590_disc_data *data;
/*
* The issued Read Backward or Read Previous command is not
* supported by the device
* The recovery action should be to issue another command:
* Read Revious: if Read Backward is not supported
* Read Backward: if Read Previous is not supported
*/
data = device->discdata;
if (data->read_back_op == READ_PREVIOUS) {
DBF_EVENT(2, "(%08x): No support for READ_PREVIOUS command\n",
device->cdev_id);
data->read_back_op = READ_BACKWARD;
} else {
DBF_EVENT(2, "(%08x): No support for READ_BACKWARD command\n",
device->cdev_id);
data->read_back_op = READ_PREVIOUS;
}
tape_3590_read_opposite(device, request);
return tape_3590_erp_retry(device, request, irb);
}
/*
* Error Recovery read opposite
*/
static int
tape_3590_erp_read_opposite(struct tape_device *device,
struct tape_request *request, struct irb *irb)
{
switch (request->op) {
case TO_RFO:
/*
* We did read forward, but the data could not be read.
* We will read backward and then skip forward again.
*/
tape_3590_read_opposite(device, request);
return tape_3590_erp_retry(device, request, irb);
case TO_RBA:
/* We tried to read forward and backward, but hat no success */
return tape_3590_erp_failed(device, request, irb, -EIO);
break;
default:
return tape_3590_erp_failed(device, request, irb, -EIO);
}
}
/*
* Print an MIM (Media Information Message) (message code f0)
*/
static void
tape_3590_print_mim_msg_f0(struct tape_device *device, struct irb *irb)
{
struct tape_3590_sense *sense;
char *exception, *service;
exception = kmalloc(BUFSIZE, GFP_ATOMIC);
service = kmalloc(BUFSIZE, GFP_ATOMIC);
if (!exception || !service)
goto out_nomem;
sense = (struct tape_3590_sense *) irb->ecw;
/* Exception Message */
switch (sense->fmt.f70.emc) {
case 0x02:
snprintf(exception, BUFSIZE, "Data degraded");
break;
case 0x03:
snprintf(exception, BUFSIZE, "Data degraded in partion %i",
sense->fmt.f70.mp);
break;
case 0x04:
snprintf(exception, BUFSIZE, "Medium degraded");
break;
case 0x05:
snprintf(exception, BUFSIZE, "Medium degraded in partition %i",
sense->fmt.f70.mp);
break;
case 0x06:
snprintf(exception, BUFSIZE, "Block 0 Error");
break;
case 0x07:
snprintf(exception, BUFSIZE, "Medium Exception 0x%02x",
sense->fmt.f70.md);
break;
default:
snprintf(exception, BUFSIZE, "0x%02x",
sense->fmt.f70.emc);
break;
}
/* Service Message */
switch (sense->fmt.f70.smc) {
case 0x02:
snprintf(service, BUFSIZE, "Reference Media maintenance "
"procedure %i", sense->fmt.f70.md);
break;
default:
snprintf(service, BUFSIZE, "0x%02x",
sense->fmt.f70.smc);
break;
}
dev_warn (&device->cdev->dev, "Tape media information: exception %s, "
"service %s\n", exception, service);
out_nomem:
kfree(exception);
kfree(service);
}
/*
* Print an I/O Subsystem Service Information Message (message code f1)
*/
static void
tape_3590_print_io_sim_msg_f1(struct tape_device *device, struct irb *irb)
{
struct tape_3590_sense *sense;
char *exception, *service;
exception = kmalloc(BUFSIZE, GFP_ATOMIC);
service = kmalloc(BUFSIZE, GFP_ATOMIC);
if (!exception || !service)
goto out_nomem;
sense = (struct tape_3590_sense *) irb->ecw;
/* Exception Message */
switch (sense->fmt.f71.emc) {
case 0x01:
snprintf(exception, BUFSIZE, "Effect of failure is unknown");
break;
case 0x02:
snprintf(exception, BUFSIZE, "CU Exception - no performance "
"impact");
break;
case 0x03:
snprintf(exception, BUFSIZE, "CU Exception on channel "
"interface 0x%02x", sense->fmt.f71.md[0]);
break;
case 0x04:
snprintf(exception, BUFSIZE, "CU Exception on device path "
"0x%02x", sense->fmt.f71.md[0]);
break;
case 0x05:
snprintf(exception, BUFSIZE, "CU Exception on library path "
"0x%02x", sense->fmt.f71.md[0]);
break;
case 0x06:
snprintf(exception, BUFSIZE, "CU Exception on node 0x%02x",
sense->fmt.f71.md[0]);
break;
case 0x07:
snprintf(exception, BUFSIZE, "CU Exception on partition "
"0x%02x", sense->fmt.f71.md[0]);
break;
default:
snprintf(exception, BUFSIZE, "0x%02x",
sense->fmt.f71.emc);
}
/* Service Message */
switch (sense->fmt.f71.smc) {
case 0x01:
snprintf(service, BUFSIZE, "Repair impact is unknown");
break;
case 0x02:
snprintf(service, BUFSIZE, "Repair will not impact cu "
"performance");
break;
case 0x03:
if (sense->fmt.f71.mdf == 0)
snprintf(service, BUFSIZE, "Repair will disable node "
"0x%x on CU", sense->fmt.f71.md[1]);
else
snprintf(service, BUFSIZE, "Repair will disable "
"nodes (0x%x-0x%x) on CU", sense->fmt.f71.md[1],
sense->fmt.f71.md[2]);
break;
case 0x04:
if (sense->fmt.f71.mdf == 0)
snprintf(service, BUFSIZE, "Repair will disable "
"channel path 0x%x on CU",
sense->fmt.f71.md[1]);
else
snprintf(service, BUFSIZE, "Repair will disable cannel"
" paths (0x%x-0x%x) on CU",
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x05:
if (sense->fmt.f71.mdf == 0)
snprintf(service, BUFSIZE, "Repair will disable device"
" path 0x%x on CU", sense->fmt.f71.md[1]);
else
snprintf(service, BUFSIZE, "Repair will disable device"
" paths (0x%x-0x%x) on CU",
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x06:
if (sense->fmt.f71.mdf == 0)
snprintf(service, BUFSIZE, "Repair will disable "
"library path 0x%x on CU",
sense->fmt.f71.md[1]);
else
snprintf(service, BUFSIZE, "Repair will disable "
"library paths (0x%x-0x%x) on CU",
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x07:
snprintf(service, BUFSIZE, "Repair will disable access to CU");
break;
default:
snprintf(service, BUFSIZE, "0x%02x",
sense->fmt.f71.smc);
}
dev_warn (&device->cdev->dev, "I/O subsystem information: exception"
" %s, service %s\n", exception, service);
out_nomem:
kfree(exception);
kfree(service);
}
/*
* Print an Device Subsystem Service Information Message (message code f2)
*/
static void
tape_3590_print_dev_sim_msg_f2(struct tape_device *device, struct irb *irb)
{
struct tape_3590_sense *sense;
char *exception, *service;
exception = kmalloc(BUFSIZE, GFP_ATOMIC);
service = kmalloc(BUFSIZE, GFP_ATOMIC);
if (!exception || !service)
goto out_nomem;
sense = (struct tape_3590_sense *) irb->ecw;
/* Exception Message */
switch (sense->fmt.f71.emc) {
case 0x01:
snprintf(exception, BUFSIZE, "Effect of failure is unknown");
break;
case 0x02:
snprintf(exception, BUFSIZE, "DV Exception - no performance"
" impact");
break;
case 0x03:
snprintf(exception, BUFSIZE, "DV Exception on channel "
"interface 0x%02x", sense->fmt.f71.md[0]);
break;
case 0x04:
snprintf(exception, BUFSIZE, "DV Exception on loader 0x%02x",
sense->fmt.f71.md[0]);
break;
case 0x05:
snprintf(exception, BUFSIZE, "DV Exception on message display"
" 0x%02x", sense->fmt.f71.md[0]);
break;
case 0x06:
snprintf(exception, BUFSIZE, "DV Exception in tape path");
break;
case 0x07:
snprintf(exception, BUFSIZE, "DV Exception in drive");
break;
default:
snprintf(exception, BUFSIZE, "0x%02x",
sense->fmt.f71.emc);
}
/* Service Message */
switch (sense->fmt.f71.smc) {
case 0x01:
snprintf(service, BUFSIZE, "Repair impact is unknown");
break;
case 0x02:
snprintf(service, BUFSIZE, "Repair will not impact device "
"performance");
break;
case 0x03:
if (sense->fmt.f71.mdf == 0)
snprintf(service, BUFSIZE, "Repair will disable "
"channel path 0x%x on DV",
sense->fmt.f71.md[1]);
else
snprintf(service, BUFSIZE, "Repair will disable "
"channel path (0x%x-0x%x) on DV",
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x04:
if (sense->fmt.f71.mdf == 0)
snprintf(service, BUFSIZE, "Repair will disable "
"interface 0x%x on DV", sense->fmt.f71.md[1]);
else
snprintf(service, BUFSIZE, "Repair will disable "
"interfaces (0x%x-0x%x) on DV",
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x05:
if (sense->fmt.f71.mdf == 0)
snprintf(service, BUFSIZE, "Repair will disable loader"
" 0x%x on DV", sense->fmt.f71.md[1]);
else
snprintf(service, BUFSIZE, "Repair will disable loader"
" (0x%x-0x%x) on DV",
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x07:
snprintf(service, BUFSIZE, "Repair will disable access to DV");
break;
case 0x08:
if (sense->fmt.f71.mdf == 0)
snprintf(service, BUFSIZE, "Repair will disable "
"message display 0x%x on DV",
sense->fmt.f71.md[1]);
else
snprintf(service, BUFSIZE, "Repair will disable "
"message displays (0x%x-0x%x) on DV",
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x09:
snprintf(service, BUFSIZE, "Clean DV");
break;
default:
snprintf(service, BUFSIZE, "0x%02x",
sense->fmt.f71.smc);
}
dev_warn (&device->cdev->dev, "Device subsystem information: exception"
" %s, service %s\n", exception, service);
out_nomem:
kfree(exception);
kfree(service);
}
/*
* Print standard ERA Message
*/
static void
tape_3590_print_era_msg(struct tape_device *device, struct irb *irb)
{
struct tape_3590_sense *sense;
sense = (struct tape_3590_sense *) irb->ecw;
if (sense->mc == 0)
return;
if ((sense->mc > 0) && (sense->mc < TAPE_3590_MAX_MSG)) {
if (tape_3590_msg[sense->mc] != NULL)
dev_warn (&device->cdev->dev, "The tape unit has "
"issued sense message %s\n",
tape_3590_msg[sense->mc]);
else
dev_warn (&device->cdev->dev, "The tape unit has "
"issued an unknown sense message code 0x%x\n",
sense->mc);
return;
}
if (sense->mc == 0xf0) {
/* Standard Media Information Message */
dev_warn (&device->cdev->dev, "MIM SEV=%i, MC=%02x, ES=%x/%x, "
"RC=%02x-%04x-%02x\n", sense->fmt.f70.sev, sense->mc,
sense->fmt.f70.emc, sense->fmt.f70.smc,
sense->fmt.f70.refcode, sense->fmt.f70.mid,
sense->fmt.f70.fid);
tape_3590_print_mim_msg_f0(device, irb);
return;
}
if (sense->mc == 0xf1) {
/* Standard I/O Subsystem Service Information Message */
dev_warn (&device->cdev->dev, "IOSIM SEV=%i, DEVTYPE=3590/%02x,"
" MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
sense->fmt.f71.sev, device->cdev->id.dev_model,
sense->mc, sense->fmt.f71.emc, sense->fmt.f71.smc,
sense->fmt.f71.refcode1, sense->fmt.f71.refcode2,
sense->fmt.f71.refcode3);
tape_3590_print_io_sim_msg_f1(device, irb);
return;
}
if (sense->mc == 0xf2) {
/* Standard Device Service Information Message */
dev_warn (&device->cdev->dev, "DEVSIM SEV=%i, DEVTYPE=3590/%02x"
", MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
sense->fmt.f71.sev, device->cdev->id.dev_model,
sense->mc, sense->fmt.f71.emc, sense->fmt.f71.smc,
sense->fmt.f71.refcode1, sense->fmt.f71.refcode2,
sense->fmt.f71.refcode3);
tape_3590_print_dev_sim_msg_f2(device, irb);
return;
}
if (sense->mc == 0xf3) {
/* Standard Library Service Information Message */
return;
}
dev_warn (&device->cdev->dev, "The tape unit has issued an unknown "
"sense message code %x\n", sense->mc);
}
static int tape_3590_crypt_error(struct tape_device *device,
struct tape_request *request, struct irb *irb)
{
u8 cu_rc, ekm_rc1;
u16 ekm_rc2;
u32 drv_rc;
const char *bus_id;
char *sense;
sense = ((struct tape_3590_sense *) irb->ecw)->fmt.data;
bus_id = dev_name(&device->cdev->dev);
cu_rc = sense[0];
drv_rc = *((u32*) &sense[5]) & 0xffffff;
ekm_rc1 = sense[9];
ekm_rc2 = *((u16*) &sense[10]);
if ((cu_rc == 0) && (ekm_rc2 == 0xee31))
/* key not defined on EKM */
return tape_3590_erp_basic(device, request, irb, -EKEYREJECTED);
if ((cu_rc == 1) || (cu_rc == 2))
/* No connection to EKM */
return tape_3590_erp_basic(device, request, irb, -ENOTCONN);
dev_err (&device->cdev->dev, "The tape unit failed to obtain the "
"encryption key from EKM\n");
return tape_3590_erp_basic(device, request, irb, -ENOKEY);
}
/*
* 3590 error Recovery routine:
* If possible, it tries to recover from the error. If this is not possible,
* inform the user about the problem.
*/
static int
tape_3590_unit_check(struct tape_device *device, struct tape_request *request,
struct irb *irb)
{
struct tape_3590_sense *sense;
int rc;
#ifdef CONFIG_S390_TAPE_BLOCK
if (request->op == TO_BLOCK) {
/*
* Recovery for block device requests. Set the block_position
* to something invalid and retry.
*/
device->blk_data.block_position = -1;
if (request->retries-- <= 0)
return tape_3590_erp_failed(device, request, irb, -EIO);
else
return tape_3590_erp_retry(device, request, irb);
}
#endif
sense = (struct tape_3590_sense *) irb->ecw;
DBF_EVENT(6, "Unit Check: RQC = %x\n", sense->rc_rqc);
/*
* First check all RC-QRCs where we want to do something special
* - "break": basic error recovery is done
* - "goto out:": just print error message if available
*/
rc = -EIO;
switch (sense->rc_rqc) {
case 0x1110:
tape_3590_print_era_msg(device, irb);
return tape_3590_erp_read_buf_log(device, request, irb);
case 0x2011:
tape_3590_print_era_msg(device, irb);
return tape_3590_erp_read_alternate(device, request, irb);
case 0x2230:
case 0x2231:
tape_3590_print_era_msg(device, irb);
return tape_3590_erp_special_interrupt(device, request, irb);
case 0x2240:
return tape_3590_crypt_error(device, request, irb);
case 0x3010:
DBF_EVENT(2, "(%08x): Backward at Beginning of Partition\n",
device->cdev_id);
return tape_3590_erp_basic(device, request, irb, -ENOSPC);
case 0x3012:
DBF_EVENT(2, "(%08x): Forward at End of Partition\n",
device->cdev_id);
return tape_3590_erp_basic(device, request, irb, -ENOSPC);
case 0x3020:
DBF_EVENT(2, "(%08x): End of Data Mark\n", device->cdev_id);
return tape_3590_erp_basic(device, request, irb, -ENOSPC);
case 0x3122:
DBF_EVENT(2, "(%08x): Rewind Unload initiated\n",
device->cdev_id);
return tape_3590_erp_basic(device, request, irb, -EIO);
case 0x3123:
DBF_EVENT(2, "(%08x): Rewind Unload complete\n",
device->cdev_id);
tape_med_state_set(device, MS_UNLOADED);
tape_3590_schedule_work(device, TO_CRYPT_OFF);
return tape_3590_erp_basic(device, request, irb, 0);
case 0x4010:
/*
* print additional msg since default msg
* "device intervention" is not very meaningfull
*/
tape_med_state_set(device, MS_UNLOADED);
tape_3590_schedule_work(device, TO_CRYPT_OFF);
return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM);
case 0x4012: /* Device Long Busy */
/* XXX: Also use long busy handling here? */
DBF_EVENT(6, "(%08x): LONG BUSY\n", device->cdev_id);
tape_3590_print_era_msg(device, irb);
return tape_3590_erp_basic(device, request, irb, -EBUSY);
case 0x4014:
DBF_EVENT(6, "(%08x): Crypto LONG BUSY\n", device->cdev_id);
return tape_3590_erp_long_busy(device, request, irb);
case 0x5010:
if (sense->rac == 0xd0) {
/* Swap */
tape_3590_print_era_msg(device, irb);
return tape_3590_erp_swap(device, request, irb);
}
if (sense->rac == 0x26) {
/* Read Opposite */
tape_3590_print_era_msg(device, irb);
return tape_3590_erp_read_opposite(device, request,
irb);
}
return tape_3590_erp_basic(device, request, irb, -EIO);
case 0x5020:
case 0x5021:
case 0x5022:
case 0x5040:
case 0x5041:
case 0x5042:
tape_3590_print_era_msg(device, irb);
return tape_3590_erp_swap(device, request, irb);
case 0x5110:
case 0x5111:
return tape_3590_erp_basic(device, request, irb, -EMEDIUMTYPE);
case 0x5120:
case 0x1120:
tape_med_state_set(device, MS_UNLOADED);
tape_3590_schedule_work(device, TO_CRYPT_OFF);
return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM);
case 0x6020:
return tape_3590_erp_basic(device, request, irb, -EMEDIUMTYPE);
case 0x8011:
return tape_3590_erp_basic(device, request, irb, -EPERM);
case 0x8013:
dev_warn (&device->cdev->dev, "A different host has privileged"
" access to the tape unit\n");
return tape_3590_erp_basic(device, request, irb, -EPERM);
default:
return tape_3590_erp_basic(device, request, irb, -EIO);
}
}
/*
* 3590 interrupt handler:
*/
static int
tape_3590_irq(struct tape_device *device, struct tape_request *request,
struct irb *irb)
{
if (request == NULL)
return tape_3590_unsolicited_irq(device, irb);
if ((irb->scsw.cmd.dstat & DEV_STAT_UNIT_EXCEP) &&
(irb->scsw.cmd.dstat & DEV_STAT_DEV_END) &&
(request->op == TO_WRI)) {
/* Write at end of volume */
DBF_EVENT(2, "End of volume\n");
return tape_3590_erp_failed(device, request, irb, -ENOSPC);
}
if (irb->scsw.cmd.dstat & DEV_STAT_UNIT_CHECK)
return tape_3590_unit_check(device, request, irb);
if (irb->scsw.cmd.dstat & DEV_STAT_DEV_END) {
if (irb->scsw.cmd.dstat == DEV_STAT_UNIT_EXCEP) {
if (request->op == TO_FSB || request->op == TO_BSB)
request->rescnt++;
else
DBF_EVENT(5, "Unit Exception!\n");
}
return tape_3590_done(device, request);
}
if (irb->scsw.cmd.dstat & DEV_STAT_CHN_END) {
DBF_EVENT(2, "cannel end\n");
return TAPE_IO_PENDING;
}
if (irb->scsw.cmd.dstat & DEV_STAT_ATTENTION) {
DBF_EVENT(2, "Unit Attention when busy..\n");
return TAPE_IO_PENDING;
}
DBF_EVENT(6, "xunknownirq\n");
tape_dump_sense_dbf(device, request, irb);
return TAPE_IO_STOP;
}
static int tape_3590_read_dev_chars(struct tape_device *device,
struct tape_3590_rdc_data *rdc_data)
{
int rc;
struct tape_request *request;
request = tape_alloc_request(1, sizeof(*rdc_data));
if (IS_ERR(request))
return PTR_ERR(request);
request->op = TO_RDC;
tape_ccw_end(request->cpaddr, CCW_CMD_RDC, sizeof(*rdc_data),
request->cpdata);
rc = tape_do_io(device, request);
if (rc == 0)
memcpy(rdc_data, request->cpdata, sizeof(*rdc_data));
tape_free_request(request);
return rc;
}
/*
* Setup device function
*/
static int
tape_3590_setup_device(struct tape_device *device)
{
int rc;
struct tape_3590_disc_data *data;
struct tape_3590_rdc_data *rdc_data;
DBF_EVENT(6, "3590 device setup\n");
data = kzalloc(sizeof(struct tape_3590_disc_data), GFP_KERNEL | GFP_DMA);
if (data == NULL)
return -ENOMEM;
data->read_back_op = READ_PREVIOUS;
device->discdata = data;
rdc_data = kmalloc(sizeof(*rdc_data), GFP_KERNEL | GFP_DMA);
if (!rdc_data) {
rc = -ENOMEM;
goto fail_kmalloc;
}
rc = tape_3590_read_dev_chars(device, rdc_data);
if (rc) {
DBF_LH(3, "Read device characteristics failed!\n");
goto fail_rdc_data;
}
rc = tape_std_assign(device);
if (rc)
goto fail_rdc_data;
if (rdc_data->data[31] == 0x13) {
data->crypt_info.capability |= TAPE390_CRYPT_SUPPORTED_MASK;
tape_3592_disable_crypt(device);
} else {
DBF_EVENT(6, "Device has NO crypto support\n");
}
/* Try to find out if medium is loaded */
rc = tape_3590_sense_medium(device);
if (rc) {
DBF_LH(3, "3590 medium sense returned %d\n", rc);
goto fail_rdc_data;
}
return 0;
fail_rdc_data:
kfree(rdc_data);
fail_kmalloc:
kfree(data);
return rc;
}
/*
* Cleanup device function
*/
static void
tape_3590_cleanup_device(struct tape_device *device)
{
flush_scheduled_work();
tape_std_unassign(device);
kfree(device->discdata);
device->discdata = NULL;
}
/*
* List of 3590 magnetic tape commands.
*/
static tape_mtop_fn tape_3590_mtop[TAPE_NR_MTOPS] = {
[MTRESET] = tape_std_mtreset,
[MTFSF] = tape_std_mtfsf,
[MTBSF] = tape_std_mtbsf,
[MTFSR] = tape_std_mtfsr,
[MTBSR] = tape_std_mtbsr,
[MTWEOF] = tape_std_mtweof,
[MTREW] = tape_std_mtrew,
[MTOFFL] = tape_std_mtoffl,
[MTNOP] = tape_std_mtnop,
[MTRETEN] = tape_std_mtreten,
[MTBSFM] = tape_std_mtbsfm,
[MTFSFM] = tape_std_mtfsfm,
[MTEOM] = tape_std_mteom,
[MTERASE] = tape_std_mterase,
[MTRAS1] = NULL,
[MTRAS2] = NULL,
[MTRAS3] = NULL,
[MTSETBLK] = tape_std_mtsetblk,
[MTSETDENSITY] = NULL,
[MTSEEK] = tape_3590_mtseek,
[MTTELL] = tape_3590_mttell,
[MTSETDRVBUFFER] = NULL,
[MTFSS] = NULL,
[MTBSS] = NULL,
[MTWSM] = NULL,
[MTLOCK] = NULL,
[MTUNLOCK] = NULL,
[MTLOAD] = tape_std_mtload,
[MTUNLOAD] = tape_std_mtunload,
[MTCOMPRESSION] = tape_std_mtcompression,
[MTSETPART] = NULL,
[MTMKPART] = NULL
};
/*
* Tape discipline structure for 3590.
*/
static struct tape_discipline tape_discipline_3590 = {
.owner = THIS_MODULE,
.setup_device = tape_3590_setup_device,
.cleanup_device = tape_3590_cleanup_device,
.process_eov = tape_std_process_eov,
.irq = tape_3590_irq,
.read_block = tape_std_read_block,
.write_block = tape_std_write_block,
#ifdef CONFIG_S390_TAPE_BLOCK
.bread = tape_3590_bread,
.free_bread = tape_3590_free_bread,
.check_locate = tape_3590_check_locate,
#endif
.ioctl_fn = tape_3590_ioctl,
.mtop_array = tape_3590_mtop
};
static struct ccw_device_id tape_3590_ids[] = {
{CCW_DEVICE_DEVTYPE(0x3590, 0, 0x3590, 0), .driver_info = tape_3590},
{CCW_DEVICE_DEVTYPE(0x3592, 0, 0x3592, 0), .driver_info = tape_3592},
{ /* end of list */ }
};
static int
tape_3590_online(struct ccw_device *cdev)
{
return tape_generic_online(dev_get_drvdata(&cdev->dev),
&tape_discipline_3590);
}
static struct ccw_driver tape_3590_driver = {
.name = "tape_3590",
.owner = THIS_MODULE,
.ids = tape_3590_ids,
.probe = tape_generic_probe,
.remove = tape_generic_remove,
.set_offline = tape_generic_offline,
.set_online = tape_3590_online,
.freeze = tape_generic_pm_suspend,
};
/*
* Setup discipline structure.
*/
static int
tape_3590_init(void)
{
int rc;
TAPE_DBF_AREA = debug_register("tape_3590", 2, 2, 4 * sizeof(long));
debug_register_view(TAPE_DBF_AREA, &debug_sprintf_view);
#ifdef DBF_LIKE_HELL
debug_set_level(TAPE_DBF_AREA, 6);
#endif
DBF_EVENT(3, "3590 init\n");
/* Register driver for 3590 tapes. */
rc = ccw_driver_register(&tape_3590_driver);
if (rc)
DBF_EVENT(3, "3590 init failed\n");
else
DBF_EVENT(3, "3590 registered\n");
return rc;
}
static void
tape_3590_exit(void)
{
ccw_driver_unregister(&tape_3590_driver);
debug_unregister(TAPE_DBF_AREA);
}
MODULE_DEVICE_TABLE(ccw, tape_3590_ids);
MODULE_AUTHOR("(C) 2001,2006 IBM Corporation");
MODULE_DESCRIPTION("Linux on zSeries channel attached 3590 tape device driver");
MODULE_LICENSE("GPL");
module_init(tape_3590_init);
module_exit(tape_3590_exit);