linux/arch/arm/mach-pxa/include/mach/magician.h
Petr Cvek f78b3a126b ARM: pxa: magician: Rename charger cable detection EGPIOs
This patch renames EGPIOs, which are used for the charging cable presence
and type detection. Old names did not correspond with an observed
functionality (on board_id 0x3a). The behavior is not:

- AC charger
- USB charger
- Cable detection

, but:

- AC/USB type
- Cable detection1
- Cable detection2

This patch fixes a possible typo in the bit offset for the cable detection
EGPIO declaration, too.

Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14 23:06:55 +02:00

129 lines
4.2 KiB
C

/*
* GPIO and IRQ definitions for HTC Magician PDA phones
*
* Copyright (c) 2007 Philipp Zabel
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef _MAGICIAN_H_
#define _MAGICIAN_H_
#include <linux/gpio.h>
#include <mach/irqs.h>
/*
* PXA GPIOs
*/
#define GPIO0_MAGICIAN_KEY_POWER 0
#define GPIO9_MAGICIAN_UNKNOWN 9
#define GPIO10_MAGICIAN_GSM_IRQ 10
#define GPIO11_MAGICIAN_GSM_OUT1 11
#define GPIO13_MAGICIAN_CPLD_IRQ 13
#define GPIO18_MAGICIAN_UNKNOWN 18
#define GPIO22_MAGICIAN_VIBRA_EN 22
#define GPIO26_MAGICIAN_GSM_POWER 26
#define GPIO27_MAGICIAN_USBC_PUEN 27
#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN 30
#define GPIO37_MAGICIAN_KEY_HANGUP 37
#define GPIO38_MAGICIAN_KEY_CONTACTS 38
#define GPIO40_MAGICIAN_GSM_OUT2 40
#define GPIO48_MAGICIAN_UNKNOWN 48
#define GPIO56_MAGICIAN_UNKNOWN 56
#define GPIO57_MAGICIAN_CAM_RESET 57
#define GPIO75_MAGICIAN_SAMSUNG_POWER 75
#define GPIO83_MAGICIAN_nIR_EN 83
#define GPIO86_MAGICIAN_GSM_RESET 86
#define GPIO87_MAGICIAN_GSM_SELECT 87
#define GPIO90_MAGICIAN_KEY_CALENDAR 90
#define GPIO91_MAGICIAN_KEY_CAMERA 91
#define GPIO93_MAGICIAN_KEY_UP 93
#define GPIO94_MAGICIAN_KEY_DOWN 94
#define GPIO95_MAGICIAN_KEY_LEFT 95
#define GPIO96_MAGICIAN_KEY_RIGHT 96
#define GPIO97_MAGICIAN_KEY_ENTER 97
#define GPIO98_MAGICIAN_KEY_RECORD 98
#define GPIO99_MAGICIAN_HEADPHONE_IN 99
#define GPIO100_MAGICIAN_KEY_VOL_UP 100
#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101
#define GPIO102_MAGICIAN_KEY_PHONE 102
#define GPIO103_MAGICIAN_LED_KP 103
#define GPIO104_MAGICIAN_LCD_VOFF_EN 104
#define GPIO105_MAGICIAN_LCD_VON_EN 105
#define GPIO106_MAGICIAN_LCD_DCDC_NRESET 106
#define GPIO107_MAGICIAN_DS1WM_IRQ 107
#define GPIO108_MAGICIAN_GSM_READY 108
#define GPIO114_MAGICIAN_UNKNOWN 114
#define GPIO115_MAGICIAN_nPEN_IRQ 115
#define GPIO116_MAGICIAN_nCAM_EN 116
#define GPIO119_MAGICIAN_UNKNOWN 119
#define GPIO120_MAGICIAN_UNKNOWN 120
/*
* CPLD IRQs
*/
#define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0)
#define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1)
#define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2)
#define IRQ_MAGICIAN_VBUS (IRQ_BOARD_START + 3)
#define MAGICIAN_NR_IRQS (IRQ_BOARD_START + 8)
/*
* CPLD EGPIOs
*/
#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO
#define MAGICIAN_EGPIO(reg,bit) \
(MAGICIAN_EGPIO_BASE + 8*reg + bit)
/* output */
#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2)
#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5)
#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6)
#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7)
#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0)
#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1)
#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2)
#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3)
#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4)
#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5)
#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6)
#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7)
#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0)
#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1)
#define EGPIO_MAGICIAN_IR_RX_SHUTDOWN MAGICIAN_EGPIO(2, 2)
#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5)
#define EGPIO_MAGICIAN_NICD_CHARGE MAGICIAN_EGPIO(2, 6)
#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
/* input */
/* USB or AC charger type */
#define EGPIO_MAGICIAN_CABLE_TYPE MAGICIAN_EGPIO(4, 0)
/*
* Vbus is detected
* FIXME behaves like (6,3), may differ for host/device
*/
#define EGPIO_MAGICIAN_CABLE_VBUS MAGICIAN_EGPIO(4, 1)
#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0)
#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1)
#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2)
#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3)
#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4)
#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1)
/* FIXME behaves like (4,1), may differ for host/device */
#define EGPIO_MAGICIAN_CABLE_INSERTED MAGICIAN_EGPIO(6, 3)
#endif /* _MAGICIAN_H_ */