linux/drivers/platform/chrome/cros_ec_lpc_mec.c
Enric Balletbo i Serra cc8a4ea182 platform/chrome: Move mfd/cros_ec_lpc* includes to drivers/platform.
The cros-ec-lpc driver lives in drivers/platform because is platform
specific, however there are two includes (cros_ec_lpc_mec.h and
cros_ec_lpc_reg.h) that lives in include/linux/mfd. These two includes
are only used for the platform driver and are not really related to the
MFD subsystem, so move the includes from include/linux/mfd to
drivers/platform/chrome.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
2018-09-07 15:56:36 +08:00

142 lines
3.9 KiB
C

/*
* cros_ec_lpc_mec - LPC variant I/O for Microchip EC
*
* Copyright (C) 2016 Google, Inc
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* This driver uses the Chrome OS EC byte-level message-based protocol for
* communicating the keyboard state (which keys are pressed) from a keyboard EC
* to the AP over some bus (such as i2c, lpc, spi). The EC does debouncing,
* but everything else (including deghosting) is done here. The main
* motivation for this is to keep the EC firmware as simple as possible, since
* it cannot be easily upgraded and EC flash/IRAM space is relatively
* expensive.
*/
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/mfd/cros_ec_commands.h>
#include <linux/mutex.h>
#include <linux/types.h>
#include "cros_ec_lpc_mec.h"
/*
* This mutex must be held while accessing the EMI unit. We can't rely on the
* EC mutex because memmap data may be accessed without it being held.
*/
static struct mutex io_mutex;
/*
* cros_ec_lpc_mec_emi_write_address
*
* Initialize EMI read / write at a given address.
*
* @addr: Starting read / write address
* @access_type: Type of access, typically 32-bit auto-increment
*/
static void cros_ec_lpc_mec_emi_write_address(u16 addr,
enum cros_ec_lpc_mec_emi_access_mode access_type)
{
/* Address relative to start of EMI range */
addr -= MEC_EMI_RANGE_START;
outb((addr & 0xfc) | access_type, MEC_EMI_EC_ADDRESS_B0);
outb((addr >> 8) & 0x7f, MEC_EMI_EC_ADDRESS_B1);
}
/*
* cros_ec_lpc_io_bytes_mec - Read / write bytes to MEC EMI port
*
* @io_type: MEC_IO_READ or MEC_IO_WRITE, depending on request
* @offset: Base read / write address
* @length: Number of bytes to read / write
* @buf: Destination / source buffer
*
* @return 8-bit checksum of all bytes read / written
*/
u8 cros_ec_lpc_io_bytes_mec(enum cros_ec_lpc_mec_io_type io_type,
unsigned int offset, unsigned int length,
u8 *buf)
{
int i = 0;
int io_addr;
u8 sum = 0;
enum cros_ec_lpc_mec_emi_access_mode access, new_access;
/*
* Long access cannot be used on misaligned data since reading B0 loads
* the data register and writing B3 flushes.
*/
if (offset & 0x3 || length < 4)
access = ACCESS_TYPE_BYTE;
else
access = ACCESS_TYPE_LONG_AUTO_INCREMENT;
mutex_lock(&io_mutex);
/* Initialize I/O at desired address */
cros_ec_lpc_mec_emi_write_address(offset, access);
/* Skip bytes in case of misaligned offset */
io_addr = MEC_EMI_EC_DATA_B0 + (offset & 0x3);
while (i < length) {
while (io_addr <= MEC_EMI_EC_DATA_B3) {
if (io_type == MEC_IO_READ)
buf[i] = inb(io_addr++);
else
outb(buf[i], io_addr++);
sum += buf[i++];
offset++;
/* Extra bounds check in case of misaligned length */
if (i == length)
goto done;
}
/*
* Use long auto-increment access except for misaligned write,
* since writing B3 triggers the flush.
*/
if (length - i < 4 && io_type == MEC_IO_WRITE)
new_access = ACCESS_TYPE_BYTE;
else
new_access = ACCESS_TYPE_LONG_AUTO_INCREMENT;
if (new_access != access ||
access != ACCESS_TYPE_LONG_AUTO_INCREMENT) {
access = new_access;
cros_ec_lpc_mec_emi_write_address(offset, access);
}
/* Access [B0, B3] on each loop pass */
io_addr = MEC_EMI_EC_DATA_B0;
}
done:
mutex_unlock(&io_mutex);
return sum;
}
EXPORT_SYMBOL(cros_ec_lpc_io_bytes_mec);
void cros_ec_lpc_mec_init(void)
{
mutex_init(&io_mutex);
}
EXPORT_SYMBOL(cros_ec_lpc_mec_init);
void cros_ec_lpc_mec_destroy(void)
{
mutex_destroy(&io_mutex);
}
EXPORT_SYMBOL(cros_ec_lpc_mec_destroy);