linux/drivers/hid/hid-uclogic-core.c
Greg Kroah-Hartman 93020953d0 HID: check for valid USB device for many HID drivers
Many HID drivers assume that the HID device assigned to them is a USB
device as that was the only way HID devices used to be able to be
created in Linux.  However, with the additional ways that HID devices
can be created for many different bus types, that is no longer true, so
properly check that we have a USB device associated with the HID device
before allowing a driver that makes this assumption to claim it.

Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Michael Zaidman <michael.zaidman@gmail.com>
Cc: Stefan Achatz <erazor_de@users.sourceforge.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
[bentiss: amended for thrustmater.c hunk to apply]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211201183503.2373082-3-gregkh@linuxfoundation.org
2021-12-02 15:36:18 +01:00

430 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* HID driver for UC-Logic devices not fully compliant with HID standard
*
* Copyright (c) 2010-2014 Nikolai Kondrashov
* Copyright (c) 2013 Martin Rusko
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/timer.h>
#include "usbhid/usbhid.h"
#include "hid-uclogic-params.h"
#include "hid-ids.h"
/* Driver data */
struct uclogic_drvdata {
/* Interface parameters */
struct uclogic_params params;
/* Pointer to the replacement report descriptor. NULL if none. */
__u8 *desc_ptr;
/*
* Size of the replacement report descriptor.
* Only valid if desc_ptr is not NULL
*/
unsigned int desc_size;
/* Pen input device */
struct input_dev *pen_input;
/* In-range timer */
struct timer_list inrange_timer;
/* Last rotary encoder state, or U8_MAX for none */
u8 re_state;
};
/**
* uclogic_inrange_timeout - handle pen in-range state timeout.
* Emulate input events normally generated when pen goes out of range for
* tablets which don't report that.
*
* @t: The timer the timeout handler is attached to, stored in a struct
* uclogic_drvdata.
*/
static void uclogic_inrange_timeout(struct timer_list *t)
{
struct uclogic_drvdata *drvdata = from_timer(drvdata, t,
inrange_timer);
struct input_dev *input = drvdata->pen_input;
if (input == NULL)
return;
input_report_abs(input, ABS_PRESSURE, 0);
/* If BTN_TOUCH state is changing */
if (test_bit(BTN_TOUCH, input->key)) {
input_event(input, EV_MSC, MSC_SCAN,
/* Digitizer Tip Switch usage */
0xd0042);
input_report_key(input, BTN_TOUCH, 0);
}
input_report_key(input, BTN_TOOL_PEN, 0);
input_sync(input);
}
static __u8 *uclogic_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
if (drvdata->desc_ptr != NULL) {
rdesc = drvdata->desc_ptr;
*rsize = drvdata->desc_size;
}
return rdesc;
}
static int uclogic_input_mapping(struct hid_device *hdev,
struct hid_input *hi,
struct hid_field *field,
struct hid_usage *usage,
unsigned long **bit,
int *max)
{
struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
struct uclogic_params *params = &drvdata->params;
/* discard the unused pen interface */
if (params->pen_unused && (field->application == HID_DG_PEN))
return -1;
/* let hid-core decide what to do */
return 0;
}
static int uclogic_input_configured(struct hid_device *hdev,
struct hid_input *hi)
{
struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
struct uclogic_params *params = &drvdata->params;
char *name;
const char *suffix = NULL;
struct hid_field *field;
size_t len;
/* no report associated (HID_QUIRK_MULTI_INPUT not set) */
if (!hi->report)
return 0;
/*
* If this is the input corresponding to the pen report
* in need of tweaking.
*/
if (hi->report->id == params->pen.id) {
/* Remember the input device so we can simulate events */
drvdata->pen_input = hi->input;
}
field = hi->report->field[0];
switch (field->application) {
case HID_GD_KEYBOARD:
suffix = "Keyboard";
break;
case HID_GD_MOUSE:
suffix = "Mouse";
break;
case HID_GD_KEYPAD:
suffix = "Pad";
break;
case HID_DG_PEN:
suffix = "Pen";
break;
case HID_CP_CONSUMER_CONTROL:
suffix = "Consumer Control";
break;
case HID_GD_SYSTEM_CONTROL:
suffix = "System Control";
break;
}
if (suffix) {
len = strlen(hdev->name) + 2 + strlen(suffix);
name = devm_kzalloc(&hi->input->dev, len, GFP_KERNEL);
if (name) {
snprintf(name, len, "%s %s", hdev->name, suffix);
hi->input->name = name;
}
}
return 0;
}
static int uclogic_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
int rc;
struct uclogic_drvdata *drvdata = NULL;
bool params_initialized = false;
if (!hid_is_usb(hdev))
return -EINVAL;
/*
* libinput requires the pad interface to be on a different node
* than the pen, so use QUIRK_MULTI_INPUT for all tablets.
*/
hdev->quirks |= HID_QUIRK_MULTI_INPUT;
/* Allocate and assign driver data */
drvdata = devm_kzalloc(&hdev->dev, sizeof(*drvdata), GFP_KERNEL);
if (drvdata == NULL) {
rc = -ENOMEM;
goto failure;
}
timer_setup(&drvdata->inrange_timer, uclogic_inrange_timeout, 0);
drvdata->re_state = U8_MAX;
hid_set_drvdata(hdev, drvdata);
/* Initialize the device and retrieve interface parameters */
rc = uclogic_params_init(&drvdata->params, hdev);
if (rc != 0) {
hid_err(hdev, "failed probing parameters: %d\n", rc);
goto failure;
}
params_initialized = true;
hid_dbg(hdev, "parameters:\n" UCLOGIC_PARAMS_FMT_STR,
UCLOGIC_PARAMS_FMT_ARGS(&drvdata->params));
if (drvdata->params.invalid) {
hid_info(hdev, "interface is invalid, ignoring\n");
rc = -ENODEV;
goto failure;
}
/* Generate replacement report descriptor */
rc = uclogic_params_get_desc(&drvdata->params,
&drvdata->desc_ptr,
&drvdata->desc_size);
if (rc) {
hid_err(hdev,
"failed generating replacement report descriptor: %d\n",
rc);
goto failure;
}
rc = hid_parse(hdev);
if (rc) {
hid_err(hdev, "parse failed\n");
goto failure;
}
rc = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (rc) {
hid_err(hdev, "hw start failed\n");
goto failure;
}
return 0;
failure:
/* Assume "remove" might not be called if "probe" failed */
if (params_initialized)
uclogic_params_cleanup(&drvdata->params);
return rc;
}
#ifdef CONFIG_PM
static int uclogic_resume(struct hid_device *hdev)
{
int rc;
struct uclogic_params params;
/* Re-initialize the device, but discard parameters */
rc = uclogic_params_init(&params, hdev);
if (rc != 0)
hid_err(hdev, "failed to re-initialize the device\n");
else
uclogic_params_cleanup(&params);
return rc;
}
#endif
static int uclogic_raw_event(struct hid_device *hdev,
struct hid_report *report,
u8 *data, int size)
{
struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
struct uclogic_params *params = &drvdata->params;
/* Tweak pen reports, if necessary */
if (!params->pen_unused &&
(report->type == HID_INPUT_REPORT) &&
(report->id == params->pen.id) &&
(size >= 2)) {
/* If it's the "virtual" frame controls report */
if (params->frame.id != 0 &&
data[1] & params->pen_frame_flag) {
/* Change to virtual frame controls report ID */
data[0] = params->frame.id;
return 0;
}
/* If in-range reports are inverted */
if (params->pen.inrange ==
UCLOGIC_PARAMS_PEN_INRANGE_INVERTED) {
/* Invert the in-range bit */
data[1] ^= 0x40;
}
/*
* If report contains fragmented high-resolution pen
* coordinates
*/
if (size >= 10 && params->pen.fragmented_hires) {
u8 pressure_low_byte;
u8 pressure_high_byte;
/* Lift pressure bytes */
pressure_low_byte = data[6];
pressure_high_byte = data[7];
/*
* Move Y coord to make space for high-order X
* coord byte
*/
data[6] = data[5];
data[5] = data[4];
/* Move high-order X coord byte */
data[4] = data[8];
/* Move high-order Y coord byte */
data[7] = data[9];
/* Place pressure bytes */
data[8] = pressure_low_byte;
data[9] = pressure_high_byte;
}
/* If we need to emulate in-range detection */
if (params->pen.inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE) {
/* Set in-range bit */
data[1] |= 0x40;
/* (Re-)start in-range timeout */
mod_timer(&drvdata->inrange_timer,
jiffies + msecs_to_jiffies(100));
}
}
/* Tweak frame control reports, if necessary */
if ((report->type == HID_INPUT_REPORT) &&
(report->id == params->frame.id)) {
/* If need to, and can, set pad device ID for Wacom drivers */
if (params->frame.dev_id_byte > 0 &&
params->frame.dev_id_byte < size) {
data[params->frame.dev_id_byte] = 0xf;
}
/* If need to, and can, read rotary encoder state change */
if (params->frame.re_lsb > 0 &&
params->frame.re_lsb / 8 < size) {
unsigned int byte = params->frame.re_lsb / 8;
unsigned int bit = params->frame.re_lsb % 8;
u8 change;
u8 prev_state = drvdata->re_state;
/* Read Gray-coded state */
u8 state = (data[byte] >> bit) & 0x3;
/* Encode state change into 2-bit signed integer */
if ((prev_state == 1 && state == 0) ||
(prev_state == 2 && state == 3)) {
change = 1;
} else if ((prev_state == 2 && state == 0) ||
(prev_state == 1 && state == 3)) {
change = 3;
} else {
change = 0;
}
/* Write change */
data[byte] = (data[byte] & ~((u8)3 << bit)) |
(change << bit);
/* Remember state */
drvdata->re_state = state;
}
}
return 0;
}
static void uclogic_remove(struct hid_device *hdev)
{
struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
del_timer_sync(&drvdata->inrange_timer);
hid_hw_stop(hdev);
kfree(drvdata->desc_ptr);
uclogic_params_cleanup(&drvdata->params);
}
static const struct hid_device_id uclogic_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UCLOGIC_TABLET_PF1209) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UCLOGIC_TABLET_WP1062) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60) },
{ HID_USB_DEVICE(USB_VENDOR_ID_HUION,
USB_DEVICE_ID_HUION_TABLET) },
{ HID_USB_DEVICE(USB_VENDOR_ID_HUION,
USB_DEVICE_ID_HUION_HS64) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TRUST,
USB_DEVICE_ID_TRUST_PANORA_TABLET) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_HUION_TABLET) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_YIYNOVA_TABLET) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UCLOGIC_UGEE_TABLET_81) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UCLOGIC_UGEE_TABLET_45) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UCLOGIC_UGEE_TABLET_47) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UCLOGIC_DRAWIMAGE_G3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER,
USB_DEVICE_ID_UGTIZER_TABLET_GP0610) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER,
USB_DEVICE_ID_UGTIZER_TABLET_GT5040) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
USB_DEVICE_ID_UGEE_TABLET_G5) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
USB_DEVICE_ID_UGEE_TABLET_EX07S) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
USB_DEVICE_ID_UGEE_TABLET_RAINBOW_CV720) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
USB_DEVICE_ID_UGEE_XPPEN_TABLET_G540) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
USB_DEVICE_ID_UGEE_XPPEN_TABLET_G640) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01) },
{ }
};
MODULE_DEVICE_TABLE(hid, uclogic_devices);
static struct hid_driver uclogic_driver = {
.name = "uclogic",
.id_table = uclogic_devices,
.probe = uclogic_probe,
.remove = uclogic_remove,
.report_fixup = uclogic_report_fixup,
.raw_event = uclogic_raw_event,
.input_mapping = uclogic_input_mapping,
.input_configured = uclogic_input_configured,
#ifdef CONFIG_PM
.resume = uclogic_resume,
.reset_resume = uclogic_resume,
#endif
};
module_hid_driver(uclogic_driver);
MODULE_AUTHOR("Martin Rusko");
MODULE_AUTHOR("Nikolai Kondrashov");
MODULE_LICENSE("GPL");