linux/drivers/usb/serial/console.c
Linus Torvalds d9a807461f USB merge for 3.7-rc1
Here is the big USB pull request for 3.7-rc1
 
 There are lots of gadget driver changes (including copying a bunch of
 files into the drivers/staging/ccg/ directory so that the other gadget
 drivers can be fixed up properly without breaking that driver), and we
 remove the old obsolete ub.c driver from the tree.  There are also the
 usual XHCI set of updates, and other various driver changes and updates.
 We also are trying hard to remove the old dbg() macro, but the final
 bits of that removal will be coming in through the networking tree
 before we can delete it for good.
 
 All of these patches have been in the linux-next tree.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlBp3+AACgkQMUfUDdst+ym5vwCfe93FyJyXn/RDkGz7iBemvWFd
 vrwAoIxjaOa4/yWZWcgrWc5bP4aO3ssc
 =jYDr
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB changes from Greg Kroah-Hartman:
 "Here is the big USB pull request for 3.7-rc1

  There are lots of gadget driver changes (including copying a bunch of
  files into the drivers/staging/ccg/ directory so that the other gadget
  drivers can be fixed up properly without breaking that driver), and we
  remove the old obsolete ub.c driver from the tree.

  There are also the usual XHCI set of updates, and other various driver
  changes and updates.  We also are trying hard to remove the old dbg()
  macro, but the final bits of that removal will be coming in through
  the networking tree before we can delete it for good.

  All of these patches have been in the linux-next tree.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.

* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
  USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  USB: uas: fix gcc warning
  USB: uas: fix locking
  USB: Fix race condition when removing host controllers
  USB: uas: add locking
  USB: uas: fix abort
  USB: uas: remove aborted field, replace with status bit.
  USB: uas: fix task management
  USB: uas: keep track of command urbs
  xhci: Intel Panther Point BEI quirk.
  powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
  USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
  Revert "usb : Add sysfs files to control port power."
  USB: serial: remove vizzini driver
  usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
  Increase XHCI suspend timeout to 16ms
  USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  USB: sierra_ms: don't keep unused variable
  fsl/usb: Add support for USB controller version 2.4
  USB: qcaux: add Pantech vendor class match
  ...
2012-10-01 13:23:01 -07:00

314 lines
7.5 KiB
C

/*
* USB Serial Console driver
*
* Copyright (C) 2001 - 2002 Greg Kroah-Hartman (greg@kroah.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* Thanks to Randy Dunlap for the original version of this code.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/console.h>
#include <linux/serial.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
struct usbcons_info {
int magic;
int break_flag;
struct usb_serial_port *port;
};
static struct usbcons_info usbcons_info;
static struct console usbcons;
/*
* ------------------------------------------------------------
* USB Serial console driver
*
* Much of the code here is copied from drivers/char/serial.c
* and implements a phony serial console in the same way that
* serial.c does so that in case some software queries it,
* it will get the same results.
*
* Things that are different from the way the serial port code
* does things, is that we call the lower level usb-serial
* driver code to initialize the device, and we set the initial
* console speeds based on the command line arguments.
* ------------------------------------------------------------
*/
/*
* The parsing of the command line works exactly like the
* serial.c code, except that the specifier is "ttyUSB" instead
* of "ttyS".
*/
static int usb_console_setup(struct console *co, char *options)
{
struct usbcons_info *info = &usbcons_info;
int baud = 9600;
int bits = 8;
int parity = 'n';
int doflow = 0;
int cflag = CREAD | HUPCL | CLOCAL;
char *s;
struct usb_serial *serial;
struct usb_serial_port *port;
int retval;
struct tty_struct *tty = NULL;
struct ktermios dummy;
if (options) {
baud = simple_strtoul(options, NULL, 10);
s = options;
while (*s >= '0' && *s <= '9')
s++;
if (*s)
parity = *s++;
if (*s)
bits = *s++ - '0';
if (*s)
doflow = (*s++ == 'r');
}
/* Sane default */
if (baud == 0)
baud = 9600;
switch (bits) {
case 7:
cflag |= CS7;
break;
default:
case 8:
cflag |= CS8;
break;
}
switch (parity) {
case 'o': case 'O':
cflag |= PARODD;
break;
case 'e': case 'E':
cflag |= PARENB;
break;
}
co->cflag = cflag;
/*
* no need to check the index here: if the index is wrong, console
* code won't call us
*/
serial = usb_serial_get_by_index(co->index);
if (serial == NULL) {
/* no device is connected yet, sorry :( */
pr_err("No USB device connected to ttyUSB%i\n", co->index);
return -ENODEV;
}
retval = usb_autopm_get_interface(serial->interface);
if (retval)
goto error_get_interface;
port = serial->port[co->index - serial->minor];
tty_port_tty_set(&port->port, NULL);
info->port = port;
++port->port.count;
if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) {
if (serial->type->set_termios) {
/*
* allocate a fake tty so the driver can initialize
* the termios structure, then later call set_termios to
* configure according to command line arguments
*/
tty = kzalloc(sizeof(*tty), GFP_KERNEL);
if (!tty) {
retval = -ENOMEM;
dev_err(&port->dev, "no more memory\n");
goto reset_open_count;
}
kref_init(&tty->kref);
tty_port_tty_set(&port->port, tty);
tty->driver = usb_serial_tty_driver;
tty->index = co->index;
if (tty_init_termios(tty)) {
retval = -ENOMEM;
dev_err(&port->dev, "no more memory\n");
goto free_tty;
}
}
/* only call the device specific open if this
* is the first time the port is opened */
if (serial->type->open)
retval = serial->type->open(NULL, port);
else
retval = usb_serial_generic_open(NULL, port);
if (retval) {
dev_err(&port->dev, "could not open USB console port\n");
goto fail;
}
if (serial->type->set_termios) {
tty->termios.c_cflag = cflag;
tty_termios_encode_baud_rate(&tty->termios, baud, baud);
memset(&dummy, 0, sizeof(struct ktermios));
serial->type->set_termios(tty, port, &dummy);
tty_port_tty_set(&port->port, NULL);
kfree(tty);
}
set_bit(ASYNCB_INITIALIZED, &port->port.flags);
}
/* Now that any required fake tty operations are completed restore
* the tty port count */
--port->port.count;
/* The console is special in terms of closing the device so
* indicate this port is now acting as a system console. */
port->port.console = 1;
mutex_unlock(&serial->disc_mutex);
return retval;
fail:
tty_port_tty_set(&port->port, NULL);
free_tty:
kfree(tty);
reset_open_count:
port->port.count = 0;
usb_autopm_put_interface(serial->interface);
error_get_interface:
usb_serial_put(serial);
mutex_unlock(&serial->disc_mutex);
return retval;
}
static void usb_console_write(struct console *co,
const char *buf, unsigned count)
{
static struct usbcons_info *info = &usbcons_info;
struct usb_serial_port *port = info->port;
struct usb_serial *serial;
int retval = -ENODEV;
if (!port || port->serial->dev->state == USB_STATE_NOTATTACHED)
return;
serial = port->serial;
if (count == 0)
return;
pr_debug("%s - port %d, %d byte(s)\n", __func__, port->number, count);
if (!port->port.console) {
pr_debug("%s - port not opened\n", __func__);
return;
}
while (count) {
unsigned int i;
unsigned int lf;
/* search for LF so we can insert CR if necessary */
for (i = 0, lf = 0 ; i < count ; i++) {
if (*(buf + i) == 10) {
lf = 1;
i++;
break;
}
}
/* pass on to the driver specific version of this function if
it is available */
if (serial->type->write)
retval = serial->type->write(NULL, port, buf, i);
else
retval = usb_serial_generic_write(NULL, port, buf, i);
pr_debug("%s - return value : %d\n", __func__, retval);
if (lf) {
/* append CR after LF */
unsigned char cr = 13;
if (serial->type->write)
retval = serial->type->write(NULL,
port, &cr, 1);
else
retval = usb_serial_generic_write(NULL,
port, &cr, 1);
pr_debug("%s - return value : %d\n", __func__, retval);
}
buf += i;
count -= i;
}
}
static struct tty_driver *usb_console_device(struct console *co, int *index)
{
struct tty_driver **p = (struct tty_driver **)co->data;
if (!*p)
return NULL;
*index = co->index;
return *p;
}
static struct console usbcons = {
.name = "ttyUSB",
.write = usb_console_write,
.device = usb_console_device,
.setup = usb_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &usb_serial_tty_driver,
};
void usb_serial_console_disconnect(struct usb_serial *serial)
{
if (serial && serial->port && serial->port[0]
&& serial->port[0] == usbcons_info.port) {
usb_serial_console_exit();
usb_serial_put(serial);
}
}
void usb_serial_console_init(int minor)
{
if (minor == 0) {
/*
* Call register_console() if this is the first device plugged
* in. If we call it earlier, then the callback to
* console_setup() will fail, as there is not a device seen by
* the USB subsystem yet.
*/
/*
* Register console.
* NOTES:
* console_setup() is called (back) immediately (from
* register_console). console_write() is called immediately
* from register_console iff CON_PRINTBUFFER is set in flags.
*/
pr_debug("registering the USB serial console.\n");
register_console(&usbcons);
}
}
void usb_serial_console_exit(void)
{
if (usbcons_info.port) {
unregister_console(&usbcons);
usbcons_info.port->port.console = 0;
usbcons_info.port = NULL;
}
}