linux/arch/powerpc/sysdev/cpm2.c
Mike Rapoport e31cf2f4ca mm: don't include asm/pgtable.h if linux/mm.h is already included
Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include <linux/mm.h>") ; do
		sed -i -e '/include <asm\/pgtable.h>/ d' $f
	done

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00

356 lines
8.3 KiB
C

/*
* General Purpose functions for the global management of the
* 8260 Communication Processor Module.
* Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
* Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
* 2.3.99 Updates
*
* 2006 (c) MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
* Merged to arch/powerpc from arch/ppc/syslib/cpm2_common.c
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/*
*
* In addition to the individual control of the communication
* channels, there are a few functions that globally affect the
* communication processor.
*
* Buffer descriptors must be allocated from the dual ported memory
* space. The allocator for that is here. When the communication
* process is reset, we reclaim the memory available. There is
* currently no deallocator for this memory.
*/
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mpc8260.h>
#include <asm/page.h>
#include <asm/cpm2.h>
#include <asm/rheap.h>
#include <asm/fs_pd.h>
#include <sysdev/fsl_soc.h>
cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */
/* We allocate this here because it is used almost exclusively for
* the communication processor devices.
*/
cpm2_map_t __iomem *cpm2_immr;
EXPORT_SYMBOL(cpm2_immr);
#define CPM_MAP_SIZE (0x40000) /* 256k - the PQ3 reserve this amount
of space for CPM as it is larger
than on PQ2 */
void __init cpm2_reset(void)
{
#ifdef CONFIG_PPC_85xx
cpm2_immr = ioremap(get_immrbase() + 0x80000, CPM_MAP_SIZE);
#else
cpm2_immr = ioremap(get_immrbase(), CPM_MAP_SIZE);
#endif
/* Tell everyone where the comm processor resides.
*/
cpmp = &cpm2_immr->im_cpm;
#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
/* Reset the CPM.
*/
cpm_command(CPM_CR_RST, 0);
#endif
}
static DEFINE_SPINLOCK(cmd_lock);
#define MAX_CR_CMD_LOOPS 10000
int cpm_command(u32 command, u8 opcode)
{
int i, ret;
unsigned long flags;
spin_lock_irqsave(&cmd_lock, flags);
ret = 0;
out_be32(&cpmp->cp_cpcr, command | opcode | CPM_CR_FLG);
for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
goto out;
printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
ret = -EIO;
out:
spin_unlock_irqrestore(&cmd_lock, flags);
return ret;
}
EXPORT_SYMBOL(cpm_command);
/* Set a baud rate generator. This needs lots of work. There are
* eight BRGs, which can be connected to the CPM channels or output
* as clocks. The BRGs are in two different block of internal
* memory mapped space.
* The baud rate clock is the system clock divided by something.
* It was set up long ago during the initial boot phase and is
* is given to us.
* Baud rate clocks are zero-based in the driver code (as that maps
* to port numbers). Documentation uses 1-based numbering.
*/
void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src)
{
u32 __iomem *bp;
u32 val;
/* This is good enough to get SMCs running.....
*/
if (brg < 4) {
bp = cpm2_map_size(im_brgc1, 16);
} else {
bp = cpm2_map_size(im_brgc5, 16);
brg -= 4;
}
bp += brg;
/* Round the clock divider to the nearest integer. */
val = (((clk * 2 / rate) - 1) & ~1) | CPM_BRG_EN | src;
if (div16)
val |= CPM_BRG_DIV16;
out_be32(bp, val);
cpm2_unmap(bp);
}
EXPORT_SYMBOL(__cpm2_setbrg);
int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
{
int ret = 0;
int shift;
int i, bits = 0;
cpmux_t __iomem *im_cpmux;
u32 __iomem *reg;
u32 mask = 7;
u8 clk_map[][3] = {
{CPM_CLK_FCC1, CPM_BRG5, 0},
{CPM_CLK_FCC1, CPM_BRG6, 1},
{CPM_CLK_FCC1, CPM_BRG7, 2},
{CPM_CLK_FCC1, CPM_BRG8, 3},
{CPM_CLK_FCC1, CPM_CLK9, 4},
{CPM_CLK_FCC1, CPM_CLK10, 5},
{CPM_CLK_FCC1, CPM_CLK11, 6},
{CPM_CLK_FCC1, CPM_CLK12, 7},
{CPM_CLK_FCC2, CPM_BRG5, 0},
{CPM_CLK_FCC2, CPM_BRG6, 1},
{CPM_CLK_FCC2, CPM_BRG7, 2},
{CPM_CLK_FCC2, CPM_BRG8, 3},
{CPM_CLK_FCC2, CPM_CLK13, 4},
{CPM_CLK_FCC2, CPM_CLK14, 5},
{CPM_CLK_FCC2, CPM_CLK15, 6},
{CPM_CLK_FCC2, CPM_CLK16, 7},
{CPM_CLK_FCC3, CPM_BRG5, 0},
{CPM_CLK_FCC3, CPM_BRG6, 1},
{CPM_CLK_FCC3, CPM_BRG7, 2},
{CPM_CLK_FCC3, CPM_BRG8, 3},
{CPM_CLK_FCC3, CPM_CLK13, 4},
{CPM_CLK_FCC3, CPM_CLK14, 5},
{CPM_CLK_FCC3, CPM_CLK15, 6},
{CPM_CLK_FCC3, CPM_CLK16, 7},
{CPM_CLK_SCC1, CPM_BRG1, 0},
{CPM_CLK_SCC1, CPM_BRG2, 1},
{CPM_CLK_SCC1, CPM_BRG3, 2},
{CPM_CLK_SCC1, CPM_BRG4, 3},
{CPM_CLK_SCC1, CPM_CLK11, 4},
{CPM_CLK_SCC1, CPM_CLK12, 5},
{CPM_CLK_SCC1, CPM_CLK3, 6},
{CPM_CLK_SCC1, CPM_CLK4, 7},
{CPM_CLK_SCC2, CPM_BRG1, 0},
{CPM_CLK_SCC2, CPM_BRG2, 1},
{CPM_CLK_SCC2, CPM_BRG3, 2},
{CPM_CLK_SCC2, CPM_BRG4, 3},
{CPM_CLK_SCC2, CPM_CLK11, 4},
{CPM_CLK_SCC2, CPM_CLK12, 5},
{CPM_CLK_SCC2, CPM_CLK3, 6},
{CPM_CLK_SCC2, CPM_CLK4, 7},
{CPM_CLK_SCC3, CPM_BRG1, 0},
{CPM_CLK_SCC3, CPM_BRG2, 1},
{CPM_CLK_SCC3, CPM_BRG3, 2},
{CPM_CLK_SCC3, CPM_BRG4, 3},
{CPM_CLK_SCC3, CPM_CLK5, 4},
{CPM_CLK_SCC3, CPM_CLK6, 5},
{CPM_CLK_SCC3, CPM_CLK7, 6},
{CPM_CLK_SCC3, CPM_CLK8, 7},
{CPM_CLK_SCC4, CPM_BRG1, 0},
{CPM_CLK_SCC4, CPM_BRG2, 1},
{CPM_CLK_SCC4, CPM_BRG3, 2},
{CPM_CLK_SCC4, CPM_BRG4, 3},
{CPM_CLK_SCC4, CPM_CLK5, 4},
{CPM_CLK_SCC4, CPM_CLK6, 5},
{CPM_CLK_SCC4, CPM_CLK7, 6},
{CPM_CLK_SCC4, CPM_CLK8, 7},
};
im_cpmux = cpm2_map(im_cpmux);
switch (target) {
case CPM_CLK_SCC1:
reg = &im_cpmux->cmx_scr;
shift = 24;
break;
case CPM_CLK_SCC2:
reg = &im_cpmux->cmx_scr;
shift = 16;
break;
case CPM_CLK_SCC3:
reg = &im_cpmux->cmx_scr;
shift = 8;
break;
case CPM_CLK_SCC4:
reg = &im_cpmux->cmx_scr;
shift = 0;
break;
case CPM_CLK_FCC1:
reg = &im_cpmux->cmx_fcr;
shift = 24;
break;
case CPM_CLK_FCC2:
reg = &im_cpmux->cmx_fcr;
shift = 16;
break;
case CPM_CLK_FCC3:
reg = &im_cpmux->cmx_fcr;
shift = 8;
break;
default:
printk(KERN_ERR "cpm2_clock_setup: invalid clock target\n");
return -EINVAL;
}
for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
if (clk_map[i][0] == target && clk_map[i][1] == clock) {
bits = clk_map[i][2];
break;
}
}
if (i == ARRAY_SIZE(clk_map))
ret = -EINVAL;
bits <<= shift;
mask <<= shift;
if (mode == CPM_CLK_RTX) {
bits |= bits << 3;
mask |= mask << 3;
} else if (mode == CPM_CLK_RX) {
bits <<= 3;
mask <<= 3;
}
out_be32(reg, (in_be32(reg) & ~mask) | bits);
cpm2_unmap(im_cpmux);
return ret;
}
int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock)
{
int ret = 0;
int shift;
int i, bits = 0;
cpmux_t __iomem *im_cpmux;
u8 __iomem *reg;
u8 mask = 3;
u8 clk_map[][3] = {
{CPM_CLK_SMC1, CPM_BRG1, 0},
{CPM_CLK_SMC1, CPM_BRG7, 1},
{CPM_CLK_SMC1, CPM_CLK7, 2},
{CPM_CLK_SMC1, CPM_CLK9, 3},
{CPM_CLK_SMC2, CPM_BRG2, 0},
{CPM_CLK_SMC2, CPM_BRG8, 1},
{CPM_CLK_SMC2, CPM_CLK4, 2},
{CPM_CLK_SMC2, CPM_CLK15, 3},
};
im_cpmux = cpm2_map(im_cpmux);
switch (target) {
case CPM_CLK_SMC1:
reg = &im_cpmux->cmx_smr;
mask = 3;
shift = 4;
break;
case CPM_CLK_SMC2:
reg = &im_cpmux->cmx_smr;
mask = 3;
shift = 0;
break;
default:
printk(KERN_ERR "cpm2_smc_clock_setup: invalid clock target\n");
return -EINVAL;
}
for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
if (clk_map[i][0] == target && clk_map[i][1] == clock) {
bits = clk_map[i][2];
break;
}
}
if (i == ARRAY_SIZE(clk_map))
ret = -EINVAL;
bits <<= shift;
mask <<= shift;
out_8(reg, (in_8(reg) & ~mask) | bits);
cpm2_unmap(im_cpmux);
return ret;
}
struct cpm2_ioports {
u32 dir, par, sor, odr, dat;
u32 res[3];
};
void cpm2_set_pin(int port, int pin, int flags)
{
struct cpm2_ioports __iomem *iop =
(struct cpm2_ioports __iomem *)&cpm2_immr->im_ioport;
pin = 1 << (31 - pin);
if (flags & CPM_PIN_OUTPUT)
setbits32(&iop[port].dir, pin);
else
clrbits32(&iop[port].dir, pin);
if (!(flags & CPM_PIN_GPIO))
setbits32(&iop[port].par, pin);
else
clrbits32(&iop[port].par, pin);
if (flags & CPM_PIN_SECONDARY)
setbits32(&iop[port].sor, pin);
else
clrbits32(&iop[port].sor, pin);
if (flags & CPM_PIN_OPENDRAIN)
setbits32(&iop[port].odr, pin);
else
clrbits32(&iop[port].odr, pin);
}