linux/arch/x86/kernel/mpparse.c
Jiang Liu c03b3b0738 x86, irq, mpparse: Release IOAPIC pin when PCI device is disabled
Release IOAPIC pin associated with PCI device when the PCI device
is disabled.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1402302011-23642-40-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-21 23:05:44 +02:00

922 lines
21 KiB
C

/*
* Intel Multiprocessor Specification 1.1 and 1.4
* compliant MP-table parsing routines.
*
* (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
* (c) 1998, 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
* (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de>
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/kernel_stat.h>
#include <linux/mc146818rtc.h>
#include <linux/bitops.h>
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/smp.h>
#include <linux/pci.h>
#include <linux/irqdomain.h>
#include <asm/mtrr.h>
#include <asm/mpspec.h>
#include <asm/pgalloc.h>
#include <asm/io_apic.h>
#include <asm/proto.h>
#include <asm/bios_ebda.h>
#include <asm/e820.h>
#include <asm/setup.h>
#include <asm/smp.h>
#include <asm/apic.h>
/*
* Checksum an MP configuration block.
*/
static int __init mpf_checksum(unsigned char *mp, int len)
{
int sum = 0;
while (len--)
sum += *mp++;
return sum & 0xFF;
}
int __init default_mpc_apic_id(struct mpc_cpu *m)
{
return m->apicid;
}
static void __init MP_processor_info(struct mpc_cpu *m)
{
int apicid;
char *bootup_cpu = "";
if (!(m->cpuflag & CPU_ENABLED)) {
disabled_cpus++;
return;
}
apicid = x86_init.mpparse.mpc_apic_id(m);
if (m->cpuflag & CPU_BOOTPROCESSOR) {
bootup_cpu = " (Bootup-CPU)";
boot_cpu_physical_apicid = m->apicid;
}
pr_info("Processor #%d%s\n", m->apicid, bootup_cpu);
generic_processor_info(apicid, m->apicver);
}
#ifdef CONFIG_X86_IO_APIC
void __init default_mpc_oem_bus_info(struct mpc_bus *m, char *str)
{
memcpy(str, m->bustype, 6);
str[6] = 0;
apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->busid, str);
}
static void __init MP_bus_info(struct mpc_bus *m)
{
char str[7];
x86_init.mpparse.mpc_oem_bus_info(m, str);
#if MAX_MP_BUSSES < 256
if (m->busid >= MAX_MP_BUSSES) {
pr_warn("MP table busid value (%d) for bustype %s is too large, max. supported is %d\n",
m->busid, str, MAX_MP_BUSSES - 1);
return;
}
#endif
set_bit(m->busid, mp_bus_not_pci);
if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
#ifdef CONFIG_EISA
mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
#endif
} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
if (x86_init.mpparse.mpc_oem_pci_bus)
x86_init.mpparse.mpc_oem_pci_bus(m);
clear_bit(m->busid, mp_bus_not_pci);
#ifdef CONFIG_EISA
mp_bus_id_to_type[m->busid] = MP_BUS_PCI;
} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
mp_bus_id_to_type[m->busid] = MP_BUS_EISA;
#endif
} else
pr_warn("Unknown bustype %s - ignoring\n", str);
}
static struct irq_domain_ops mp_ioapic_irqdomain_ops = {
.map = mp_irqdomain_map,
.unmap = mp_irqdomain_unmap,
};
static void __init MP_ioapic_info(struct mpc_ioapic *m)
{
struct ioapic_domain_cfg cfg = {
.type = IOAPIC_DOMAIN_LEGACY,
.ops = &mp_ioapic_irqdomain_ops,
};
if (m->flags & MPC_APIC_USABLE)
mp_register_ioapic(m->apicid, m->apicaddr, gsi_top, &cfg);
}
static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq)
{
apic_printk(APIC_VERBOSE,
"Int: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC INT %02x\n",
mp_irq->irqtype, mp_irq->irqflag & 3,
(mp_irq->irqflag >> 2) & 3, mp_irq->srcbus,
mp_irq->srcbusirq, mp_irq->dstapic, mp_irq->dstirq);
}
#else /* CONFIG_X86_IO_APIC */
static inline void __init MP_bus_info(struct mpc_bus *m) {}
static inline void __init MP_ioapic_info(struct mpc_ioapic *m) {}
#endif /* CONFIG_X86_IO_APIC */
static void __init MP_lintsrc_info(struct mpc_lintsrc *m)
{
apic_printk(APIC_VERBOSE,
"Lint: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC LINT %02x\n",
m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbusid,
m->srcbusirq, m->destapic, m->destapiclint);
}
/*
* Read/parse the MPC
*/
static int __init smp_check_mpc(struct mpc_table *mpc, char *oem, char *str)
{
if (memcmp(mpc->signature, MPC_SIGNATURE, 4)) {
pr_err("MPTABLE: bad signature [%c%c%c%c]!\n",
mpc->signature[0], mpc->signature[1],
mpc->signature[2], mpc->signature[3]);
return 0;
}
if (mpf_checksum((unsigned char *)mpc, mpc->length)) {
pr_err("MPTABLE: checksum error!\n");
return 0;
}
if (mpc->spec != 0x01 && mpc->spec != 0x04) {
pr_err("MPTABLE: bad table version (%d)!!\n", mpc->spec);
return 0;
}
if (!mpc->lapic) {
pr_err("MPTABLE: null local APIC address!\n");
return 0;
}
memcpy(oem, mpc->oem, 8);
oem[8] = 0;
pr_info("MPTABLE: OEM ID: %s\n", oem);
memcpy(str, mpc->productid, 12);
str[12] = 0;
pr_info("MPTABLE: Product ID: %s\n", str);
pr_info("MPTABLE: APIC at: 0x%X\n", mpc->lapic);
return 1;
}
static void skip_entry(unsigned char **ptr, int *count, int size)
{
*ptr += size;
*count += size;
}
static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt)
{
pr_err("Your mptable is wrong, contact your HW vendor!\n");
pr_cont("type %x\n", *mpt);
print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_ADDRESS, 16,
1, mpc, mpc->length, 1);
}
void __init default_smp_read_mpc_oem(struct mpc_table *mpc) { }
static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
{
char str[16];
char oem[10];
int count = sizeof(*mpc);
unsigned char *mpt = ((unsigned char *)mpc) + count;
if (!smp_check_mpc(mpc, oem, str))
return 0;
#ifdef CONFIG_X86_32
generic_mps_oem_check(mpc, oem, str);
#endif
/* Initialize the lapic mapping */
if (!acpi_lapic)
register_lapic_address(mpc->lapic);
if (early)
return 1;
if (mpc->oemptr)
x86_init.mpparse.smp_read_mpc_oem(mpc);
/*
* Now process the configuration blocks.
*/
x86_init.mpparse.mpc_record(0);
while (count < mpc->length) {
switch (*mpt) {
case MP_PROCESSOR:
/* ACPI may have already provided this data */
if (!acpi_lapic)
MP_processor_info((struct mpc_cpu *)mpt);
skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
break;
case MP_BUS:
MP_bus_info((struct mpc_bus *)mpt);
skip_entry(&mpt, &count, sizeof(struct mpc_bus));
break;
case MP_IOAPIC:
MP_ioapic_info((struct mpc_ioapic *)mpt);
skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
break;
case MP_INTSRC:
mp_save_irq((struct mpc_intsrc *)mpt);
skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
break;
case MP_LINTSRC:
MP_lintsrc_info((struct mpc_lintsrc *)mpt);
skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
break;
default:
/* wrong mptable */
smp_dump_mptable(mpc, mpt);
count = mpc->length;
break;
}
x86_init.mpparse.mpc_record(1);
}
if (!num_processors)
pr_err("MPTABLE: no processors registered!\n");
return num_processors;
}
#ifdef CONFIG_X86_IO_APIC
static int __init ELCR_trigger(unsigned int irq)
{
unsigned int port;
port = 0x4d0 + (irq >> 3);
return (inb(port) >> (irq & 7)) & 1;
}
static void __init construct_default_ioirq_mptable(int mpc_default_type)
{
struct mpc_intsrc intsrc;
int i;
int ELCR_fallback = 0;
intsrc.type = MP_INTSRC;
intsrc.irqflag = 0; /* conforming */
intsrc.srcbus = 0;
intsrc.dstapic = mpc_ioapic_id(0);
intsrc.irqtype = mp_INT;
/*
* If true, we have an ISA/PCI system with no IRQ entries
* in the MP table. To prevent the PCI interrupts from being set up
* incorrectly, we try to use the ELCR. The sanity check to see if
* there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
* never be level sensitive, so we simply see if the ELCR agrees.
* If it does, we assume it's valid.
*/
if (mpc_default_type == 5) {
pr_info("ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) ||
ELCR_trigger(13))
pr_err("ELCR contains invalid data... not using ELCR\n");
else {
pr_info("Using ELCR to identify PCI interrupts\n");
ELCR_fallback = 1;
}
}
for (i = 0; i < 16; i++) {
switch (mpc_default_type) {
case 2:
if (i == 0 || i == 13)
continue; /* IRQ0 & IRQ13 not connected */
/* fall through */
default:
if (i == 2)
continue; /* IRQ2 is never connected */
}
if (ELCR_fallback) {
/*
* If the ELCR indicates a level-sensitive interrupt, we
* copy that information over to the MP table in the
* irqflag field (level sensitive, active high polarity).
*/
if (ELCR_trigger(i))
intsrc.irqflag = 13;
else
intsrc.irqflag = 0;
}
intsrc.srcbusirq = i;
intsrc.dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
mp_save_irq(&intsrc);
}
intsrc.irqtype = mp_ExtINT;
intsrc.srcbusirq = 0;
intsrc.dstirq = 0; /* 8259A to INTIN0 */
mp_save_irq(&intsrc);
}
static void __init construct_ioapic_table(int mpc_default_type)
{
struct mpc_ioapic ioapic;
struct mpc_bus bus;
bus.type = MP_BUS;
bus.busid = 0;
switch (mpc_default_type) {
default:
pr_err("???\nUnknown standard configuration %d\n",
mpc_default_type);
/* fall through */
case 1:
case 5:
memcpy(bus.bustype, "ISA ", 6);
break;
case 2:
case 6:
case 3:
memcpy(bus.bustype, "EISA ", 6);
break;
}
MP_bus_info(&bus);
if (mpc_default_type > 4) {
bus.busid = 1;
memcpy(bus.bustype, "PCI ", 6);
MP_bus_info(&bus);
}
ioapic.type = MP_IOAPIC;
ioapic.apicid = 2;
ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
ioapic.flags = MPC_APIC_USABLE;
ioapic.apicaddr = IO_APIC_DEFAULT_PHYS_BASE;
MP_ioapic_info(&ioapic);
/*
* We set up most of the low 16 IO-APIC pins according to MPS rules.
*/
construct_default_ioirq_mptable(mpc_default_type);
}
#else
static inline void __init construct_ioapic_table(int mpc_default_type) { }
#endif
static inline void __init construct_default_ISA_mptable(int mpc_default_type)
{
struct mpc_cpu processor;
struct mpc_lintsrc lintsrc;
int linttypes[2] = { mp_ExtINT, mp_NMI };
int i;
/*
* local APIC has default address
*/
mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
/*
* 2 CPUs, numbered 0 & 1.
*/
processor.type = MP_PROCESSOR;
/* Either an integrated APIC or a discrete 82489DX. */
processor.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
processor.cpuflag = CPU_ENABLED;
processor.cpufeature = (boot_cpu_data.x86 << 8) |
(boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
processor.featureflag = boot_cpu_data.x86_capability[0];
processor.reserved[0] = 0;
processor.reserved[1] = 0;
for (i = 0; i < 2; i++) {
processor.apicid = i;
MP_processor_info(&processor);
}
construct_ioapic_table(mpc_default_type);
lintsrc.type = MP_LINTSRC;
lintsrc.irqflag = 0; /* conforming */
lintsrc.srcbusid = 0;
lintsrc.srcbusirq = 0;
lintsrc.destapic = MP_APIC_ALL;
for (i = 0; i < 2; i++) {
lintsrc.irqtype = linttypes[i];
lintsrc.destapiclint = i;
MP_lintsrc_info(&lintsrc);
}
}
static struct mpf_intel *mpf_found;
static unsigned long __init get_mpc_size(unsigned long physptr)
{
struct mpc_table *mpc;
unsigned long size;
mpc = early_ioremap(physptr, PAGE_SIZE);
size = mpc->length;
early_iounmap(mpc, PAGE_SIZE);
apic_printk(APIC_VERBOSE, " mpc: %lx-%lx\n", physptr, physptr + size);
return size;
}
static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)
{
struct mpc_table *mpc;
unsigned long size;
size = get_mpc_size(mpf->physptr);
mpc = early_ioremap(mpf->physptr, size);
/*
* Read the physical hardware table. Anything here will
* override the defaults.
*/
if (!smp_read_mpc(mpc, early)) {
#ifdef CONFIG_X86_LOCAL_APIC
smp_found_config = 0;
#endif
pr_err("BIOS bug, MP table errors detected!...\n");
pr_cont("... disabling SMP support. (tell your hw vendor)\n");
early_iounmap(mpc, size);
return -1;
}
early_iounmap(mpc, size);
if (early)
return -1;
#ifdef CONFIG_X86_IO_APIC
/*
* If there are no explicit MP IRQ entries, then we are
* broken. We set up most of the low 16 IO-APIC pins to
* ISA defaults and hope it will work.
*/
if (!mp_irq_entries) {
struct mpc_bus bus;
pr_err("BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
bus.type = MP_BUS;
bus.busid = 0;
memcpy(bus.bustype, "ISA ", 6);
MP_bus_info(&bus);
construct_default_ioirq_mptable(0);
}
#endif
return 0;
}
/*
* Scan the memory blocks for an SMP configuration block.
*/
void __init default_get_smp_config(unsigned int early)
{
struct mpf_intel *mpf = mpf_found;
if (!mpf)
return;
if (acpi_lapic && early)
return;
/*
* MPS doesn't support hyperthreading, aka only have
* thread 0 apic id in MPS table
*/
if (acpi_lapic && acpi_ioapic)
return;
pr_info("Intel MultiProcessor Specification v1.%d\n",
mpf->specification);
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
if (mpf->feature2 & (1 << 7)) {
pr_info(" IMCR and PIC compatibility mode.\n");
pic_mode = 1;
} else {
pr_info(" Virtual Wire compatibility mode.\n");
pic_mode = 0;
}
#endif
/*
* Now see if we need to read further.
*/
if (mpf->feature1 != 0) {
if (early) {
/*
* local APIC has default address
*/
mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
return;
}
pr_info("Default MP configuration #%d\n", mpf->feature1);
construct_default_ISA_mptable(mpf->feature1);
} else if (mpf->physptr) {
if (check_physptr(mpf, early))
return;
} else
BUG();
if (!early)
pr_info("Processors: %d\n", num_processors);
/*
* Only use the first configuration found.
*/
}
static void __init smp_reserve_memory(struct mpf_intel *mpf)
{
memblock_reserve(mpf->physptr, get_mpc_size(mpf->physptr));
}
static int __init smp_scan_config(unsigned long base, unsigned long length)
{
unsigned int *bp = phys_to_virt(base);
struct mpf_intel *mpf;
unsigned long mem;
apic_printk(APIC_VERBOSE, "Scan for SMP in [mem %#010lx-%#010lx]\n",
base, base + length - 1);
BUILD_BUG_ON(sizeof(*mpf) != 16);
while (length > 0) {
mpf = (struct mpf_intel *)bp;
if ((*bp == SMP_MAGIC_IDENT) &&
(mpf->length == 1) &&
!mpf_checksum((unsigned char *)bp, 16) &&
((mpf->specification == 1)
|| (mpf->specification == 4))) {
#ifdef CONFIG_X86_LOCAL_APIC
smp_found_config = 1;
#endif
mpf_found = mpf;
pr_info("found SMP MP-table at [mem %#010llx-%#010llx] mapped at [%p]\n",
(unsigned long long) virt_to_phys(mpf),
(unsigned long long) virt_to_phys(mpf) +
sizeof(*mpf) - 1, mpf);
mem = virt_to_phys(mpf);
memblock_reserve(mem, sizeof(*mpf));
if (mpf->physptr)
smp_reserve_memory(mpf);
return 1;
}
bp += 4;
length -= 16;
}
return 0;
}
void __init default_find_smp_config(void)
{
unsigned int address;
/*
* FIXME: Linux assumes you have 640K of base ram..
* this continues the error...
*
* 1) Scan the bottom 1K for a signature
* 2) Scan the top 1K of base RAM
* 3) Scan the 64K of bios
*/
if (smp_scan_config(0x0, 0x400) ||
smp_scan_config(639 * 0x400, 0x400) ||
smp_scan_config(0xF0000, 0x10000))
return;
/*
* If it is an SMP machine we should know now, unless the
* configuration is in an EISA bus machine with an
* extended bios data area.
*
* there is a real-mode segmented pointer pointing to the
* 4K EBDA area at 0x40E, calculate and scan it here.
*
* NOTE! There are Linux loaders that will corrupt the EBDA
* area, and as such this kind of SMP config may be less
* trustworthy, simply because the SMP table may have been
* stomped on during early boot. These loaders are buggy and
* should be fixed.
*
* MP1.4 SPEC states to only scan first 1K of 4K EBDA.
*/
address = get_bios_ebda();
if (address)
smp_scan_config(address, 0x400);
}
#ifdef CONFIG_X86_IO_APIC
static u8 __initdata irq_used[MAX_IRQ_SOURCES];
static int __init get_MP_intsrc_index(struct mpc_intsrc *m)
{
int i;
if (m->irqtype != mp_INT)
return 0;
if (m->irqflag != 0x0f)
return 0;
/* not legacy */
for (i = 0; i < mp_irq_entries; i++) {
if (mp_irqs[i].irqtype != mp_INT)
continue;
if (mp_irqs[i].irqflag != 0x0f)
continue;
if (mp_irqs[i].srcbus != m->srcbus)
continue;
if (mp_irqs[i].srcbusirq != m->srcbusirq)
continue;
if (irq_used[i]) {
/* already claimed */
return -2;
}
irq_used[i] = 1;
return i;
}
/* not found */
return -1;
}
#define SPARE_SLOT_NUM 20
static struct mpc_intsrc __initdata *m_spare[SPARE_SLOT_NUM];
static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
{
int i;
apic_printk(APIC_VERBOSE, "OLD ");
print_mp_irq_info(m);
i = get_MP_intsrc_index(m);
if (i > 0) {
memcpy(m, &mp_irqs[i], sizeof(*m));
apic_printk(APIC_VERBOSE, "NEW ");
print_mp_irq_info(&mp_irqs[i]);
return;
}
if (!i) {
/* legacy, do nothing */
return;
}
if (*nr_m_spare < SPARE_SLOT_NUM) {
/*
* not found (-1), or duplicated (-2) are invalid entries,
* we need to use the slot later
*/
m_spare[*nr_m_spare] = m;
*nr_m_spare += 1;
}
}
static int __init
check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
{
if (!mpc_new_phys || count <= mpc_new_length) {
WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
return -1;
}
return 0;
}
#else /* CONFIG_X86_IO_APIC */
static
inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
#endif /* CONFIG_X86_IO_APIC */
static int __init replace_intsrc_all(struct mpc_table *mpc,
unsigned long mpc_new_phys,
unsigned long mpc_new_length)
{
#ifdef CONFIG_X86_IO_APIC
int i;
#endif
int count = sizeof(*mpc);
int nr_m_spare = 0;
unsigned char *mpt = ((unsigned char *)mpc) + count;
pr_info("mpc_length %x\n", mpc->length);
while (count < mpc->length) {
switch (*mpt) {
case MP_PROCESSOR:
skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
break;
case MP_BUS:
skip_entry(&mpt, &count, sizeof(struct mpc_bus));
break;
case MP_IOAPIC:
skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
break;
case MP_INTSRC:
check_irq_src((struct mpc_intsrc *)mpt, &nr_m_spare);
skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
break;
case MP_LINTSRC:
skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
break;
default:
/* wrong mptable */
smp_dump_mptable(mpc, mpt);
goto out;
}
}
#ifdef CONFIG_X86_IO_APIC
for (i = 0; i < mp_irq_entries; i++) {
if (irq_used[i])
continue;
if (mp_irqs[i].irqtype != mp_INT)
continue;
if (mp_irqs[i].irqflag != 0x0f)
continue;
if (nr_m_spare > 0) {
apic_printk(APIC_VERBOSE, "*NEW* found\n");
nr_m_spare--;
memcpy(m_spare[nr_m_spare], &mp_irqs[i], sizeof(mp_irqs[i]));
m_spare[nr_m_spare] = NULL;
} else {
struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
count += sizeof(struct mpc_intsrc);
if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
goto out;
memcpy(m, &mp_irqs[i], sizeof(*m));
mpc->length = count;
mpt += sizeof(struct mpc_intsrc);
}
print_mp_irq_info(&mp_irqs[i]);
}
#endif
out:
/* update checksum */
mpc->checksum = 0;
mpc->checksum -= mpf_checksum((unsigned char *)mpc, mpc->length);
return 0;
}
int enable_update_mptable;
static int __init update_mptable_setup(char *str)
{
enable_update_mptable = 1;
#ifdef CONFIG_PCI
pci_routeirq = 1;
#endif
return 0;
}
early_param("update_mptable", update_mptable_setup);
static unsigned long __initdata mpc_new_phys;
static unsigned long mpc_new_length __initdata = 4096;
/* alloc_mptable or alloc_mptable=4k */
static int __initdata alloc_mptable;
static int __init parse_alloc_mptable_opt(char *p)
{
enable_update_mptable = 1;
#ifdef CONFIG_PCI
pci_routeirq = 1;
#endif
alloc_mptable = 1;
if (!p)
return 0;
mpc_new_length = memparse(p, &p);
return 0;
}
early_param("alloc_mptable", parse_alloc_mptable_opt);
void __init early_reserve_e820_mpc_new(void)
{
if (enable_update_mptable && alloc_mptable)
mpc_new_phys = early_reserve_e820(mpc_new_length, 4);
}
static int __init update_mp_table(void)
{
char str[16];
char oem[10];
struct mpf_intel *mpf;
struct mpc_table *mpc, *mpc_new;
if (!enable_update_mptable)
return 0;
mpf = mpf_found;
if (!mpf)
return 0;
/*
* Now see if we need to go further.
*/
if (mpf->feature1 != 0)
return 0;
if (!mpf->physptr)
return 0;
mpc = phys_to_virt(mpf->physptr);
if (!smp_check_mpc(mpc, oem, str))
return 0;
pr_info("mpf: %llx\n", (u64)virt_to_phys(mpf));
pr_info("physptr: %x\n", mpf->physptr);
if (mpc_new_phys && mpc->length > mpc_new_length) {
mpc_new_phys = 0;
pr_info("mpc_new_length is %ld, please use alloc_mptable=8k\n",
mpc_new_length);
}
if (!mpc_new_phys) {
unsigned char old, new;
/* check if we can change the position */
mpc->checksum = 0;
old = mpf_checksum((unsigned char *)mpc, mpc->length);
mpc->checksum = 0xff;
new = mpf_checksum((unsigned char *)mpc, mpc->length);
if (old == new) {
pr_info("mpc is readonly, please try alloc_mptable instead\n");
return 0;
}
pr_info("use in-position replacing\n");
} else {
mpf->physptr = mpc_new_phys;
mpc_new = phys_to_virt(mpc_new_phys);
memcpy(mpc_new, mpc, mpc->length);
mpc = mpc_new;
/* check if we can modify that */
if (mpc_new_phys - mpf->physptr) {
struct mpf_intel *mpf_new;
/* steal 16 bytes from [0, 1k) */
pr_info("mpf new: %x\n", 0x400 - 16);
mpf_new = phys_to_virt(0x400 - 16);
memcpy(mpf_new, mpf, 16);
mpf = mpf_new;
mpf->physptr = mpc_new_phys;
}
mpf->checksum = 0;
mpf->checksum -= mpf_checksum((unsigned char *)mpf, 16);
pr_info("physptr new: %x\n", mpf->physptr);
}
/*
* only replace the one with mp_INT and
* MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
* already in mp_irqs , stored by ... and mp_config_acpi_gsi,
* may need pci=routeirq for all coverage
*/
replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length);
return 0;
}
late_initcall(update_mp_table);