linux/drivers/mmc/core/debugfs.c
Wolfram Sang 039259156b mmc: debugfs: add description for module parameter
Make it obvious what this is for.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210604104459.7574-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-14 13:57:43 +02:00

272 lines
5.8 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Debugfs support for hosts and cards
*
* Copyright (C) 2008 Atmel Corporation
*/
#include <linux/moduleparam.h>
#include <linux/export.h>
#include <linux/debugfs.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/fault-inject.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include "core.h"
#include "card.h"
#include "host.h"
#include "mmc_ops.h"
#ifdef CONFIG_FAIL_MMC_REQUEST
static DECLARE_FAULT_ATTR(fail_default_attr);
static char *fail_request;
module_param(fail_request, charp, 0);
MODULE_PARM_DESC(fail_request, "default fault injection attributes");
#endif /* CONFIG_FAIL_MMC_REQUEST */
/* The debugfs functions are optimized away when CONFIG_DEBUG_FS isn't set. */
static int mmc_ios_show(struct seq_file *s, void *data)
{
static const char *vdd_str[] = {
[8] = "2.0",
[9] = "2.1",
[10] = "2.2",
[11] = "2.3",
[12] = "2.4",
[13] = "2.5",
[14] = "2.6",
[15] = "2.7",
[16] = "2.8",
[17] = "2.9",
[18] = "3.0",
[19] = "3.1",
[20] = "3.2",
[21] = "3.3",
[22] = "3.4",
[23] = "3.5",
[24] = "3.6",
};
struct mmc_host *host = s->private;
struct mmc_ios *ios = &host->ios;
const char *str;
seq_printf(s, "clock:\t\t%u Hz\n", ios->clock);
if (host->actual_clock)
seq_printf(s, "actual clock:\t%u Hz\n", host->actual_clock);
seq_printf(s, "vdd:\t\t%u ", ios->vdd);
if ((1 << ios->vdd) & MMC_VDD_165_195)
seq_printf(s, "(1.65 - 1.95 V)\n");
else if (ios->vdd < (ARRAY_SIZE(vdd_str) - 1)
&& vdd_str[ios->vdd] && vdd_str[ios->vdd + 1])
seq_printf(s, "(%s ~ %s V)\n", vdd_str[ios->vdd],
vdd_str[ios->vdd + 1]);
else
seq_printf(s, "(invalid)\n");
switch (ios->bus_mode) {
case MMC_BUSMODE_OPENDRAIN:
str = "open drain";
break;
case MMC_BUSMODE_PUSHPULL:
str = "push-pull";
break;
default:
str = "invalid";
break;
}
seq_printf(s, "bus mode:\t%u (%s)\n", ios->bus_mode, str);
switch (ios->chip_select) {
case MMC_CS_DONTCARE:
str = "don't care";
break;
case MMC_CS_HIGH:
str = "active high";
break;
case MMC_CS_LOW:
str = "active low";
break;
default:
str = "invalid";
break;
}
seq_printf(s, "chip select:\t%u (%s)\n", ios->chip_select, str);
switch (ios->power_mode) {
case MMC_POWER_OFF:
str = "off";
break;
case MMC_POWER_UP:
str = "up";
break;
case MMC_POWER_ON:
str = "on";
break;
default:
str = "invalid";
break;
}
seq_printf(s, "power mode:\t%u (%s)\n", ios->power_mode, str);
seq_printf(s, "bus width:\t%u (%u bits)\n",
ios->bus_width, 1 << ios->bus_width);
switch (ios->timing) {
case MMC_TIMING_LEGACY:
str = "legacy";
break;
case MMC_TIMING_MMC_HS:
str = "mmc high-speed";
break;
case MMC_TIMING_SD_HS:
str = "sd high-speed";
break;
case MMC_TIMING_UHS_SDR12:
str = "sd uhs SDR12";
break;
case MMC_TIMING_UHS_SDR25:
str = "sd uhs SDR25";
break;
case MMC_TIMING_UHS_SDR50:
str = "sd uhs SDR50";
break;
case MMC_TIMING_UHS_SDR104:
str = "sd uhs SDR104";
break;
case MMC_TIMING_UHS_DDR50:
str = "sd uhs DDR50";
break;
case MMC_TIMING_MMC_DDR52:
str = "mmc DDR52";
break;
case MMC_TIMING_MMC_HS200:
str = "mmc HS200";
break;
case MMC_TIMING_MMC_HS400:
str = mmc_card_hs400es(host->card) ?
"mmc HS400 enhanced strobe" : "mmc HS400";
break;
default:
str = "invalid";
break;
}
seq_printf(s, "timing spec:\t%u (%s)\n", ios->timing, str);
switch (ios->signal_voltage) {
case MMC_SIGNAL_VOLTAGE_330:
str = "3.30 V";
break;
case MMC_SIGNAL_VOLTAGE_180:
str = "1.80 V";
break;
case MMC_SIGNAL_VOLTAGE_120:
str = "1.20 V";
break;
default:
str = "invalid";
break;
}
seq_printf(s, "signal voltage:\t%u (%s)\n", ios->signal_voltage, str);
switch (ios->drv_type) {
case MMC_SET_DRIVER_TYPE_A:
str = "driver type A";
break;
case MMC_SET_DRIVER_TYPE_B:
str = "driver type B";
break;
case MMC_SET_DRIVER_TYPE_C:
str = "driver type C";
break;
case MMC_SET_DRIVER_TYPE_D:
str = "driver type D";
break;
default:
str = "invalid";
break;
}
seq_printf(s, "driver type:\t%u (%s)\n", ios->drv_type, str);
return 0;
}
DEFINE_SHOW_ATTRIBUTE(mmc_ios);
static int mmc_clock_opt_get(void *data, u64 *val)
{
struct mmc_host *host = data;
*val = host->ios.clock;
return 0;
}
static int mmc_clock_opt_set(void *data, u64 val)
{
struct mmc_host *host = data;
/* We need this check due to input value is u64 */
if (val != 0 && (val > host->f_max || val < host->f_min))
return -EINVAL;
mmc_claim_host(host);
mmc_set_clock(host, (unsigned int) val);
mmc_release_host(host);
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(mmc_clock_fops, mmc_clock_opt_get, mmc_clock_opt_set,
"%llu\n");
void mmc_add_host_debugfs(struct mmc_host *host)
{
struct dentry *root;
root = debugfs_create_dir(mmc_hostname(host), NULL);
host->debugfs_root = root;
debugfs_create_file("ios", S_IRUSR, root, host, &mmc_ios_fops);
debugfs_create_x32("caps", S_IRUSR, root, &host->caps);
debugfs_create_x32("caps2", S_IRUSR, root, &host->caps2);
debugfs_create_file_unsafe("clock", S_IRUSR | S_IWUSR, root, host,
&mmc_clock_fops);
#ifdef CONFIG_FAIL_MMC_REQUEST
if (fail_request)
setup_fault_attr(&fail_default_attr, fail_request);
host->fail_mmc_request = fail_default_attr;
fault_create_debugfs_attr("fail_mmc_request", root,
&host->fail_mmc_request);
#endif
}
void mmc_remove_host_debugfs(struct mmc_host *host)
{
debugfs_remove_recursive(host->debugfs_root);
}
void mmc_add_card_debugfs(struct mmc_card *card)
{
struct mmc_host *host = card->host;
struct dentry *root;
if (!host->debugfs_root)
return;
root = debugfs_create_dir(mmc_card_id(card), host->debugfs_root);
card->debugfs_root = root;
debugfs_create_x32("state", S_IRUSR, root, &card->state);
}
void mmc_remove_card_debugfs(struct mmc_card *card)
{
debugfs_remove_recursive(card->debugfs_root);
card->debugfs_root = NULL;
}