linux/drivers/usb/renesas_usbhs/rcar2.c
Greg Kroah-Hartman 50f737ab96 phy: for 5.6
*) Add support in PHY core to create link between PHY consumer and PHY
    provider
 *) Add DisplayPort PHY configuration set to be used for negotiating the
    configurations to be used between DisplayPort controller and
    DisplayPort PHY
 *) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for
    TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for
    J721E SoC (Supports USB and PCIe)
 *) Add PHY driver for eMMC PHY in Intel LGM SoC
 *) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new
    Synopsys USB Controller
 *) Add support for 16nm SATA PHY present in Broadcom 7216 SoC
 *) Fix lost packet issue, fix MDIO from getting inaccessible, fix
    occasional transaction failures, fix USB driver from crashing in
    Broadcom USB PHY driver
 *) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150
 *) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from
    display controller to rockchip-inno-dsidphy
 *) Other cleanups including compile testing for some of the PHY drivers,
    fixing Kconfig indentation, duplicate writes in drivers etc.,
 
 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCgAsFiEEUXMr/TfP2p4suIY5Dlx4XIBNgtkFAl4hRU4OHGtpc2hvbkB0
 aS5jb20ACgkQDlx4XIBNgtkSnw//a1zdT1NF2RApEAbSUcB+KHpckRLjKix4Q34r
 XexDI7/qVT1FQIDSOjxNOBhPVpATCE8O/pd71gVPUYqy67xmXhLK/FmBm90pzDYb
 JEt6zwaDoUaljFXN3OqXC1Z6q2hwRuKdERLQ0dajh8GAbkt0OOlzT8QXwv3m0YFg
 gUto2yytH8ZM/kdm3so1vc6vKtinW8QLlcigsgpaXVjQijeTaC5Wi1vxwgYeQE8K
 mHjipnCUl8mcuwKxAVFobSHxxSANWt6KJC0MOEB38xhsvylYgbE6ERoCHL5bERJA
 bsOJdiMAc3+UzlnbGlRNVTTkBReYWtSZ7MyHtjnPAl5xIpDk6/arPkX+KGzKTP/a
 MTC0XPHDXs2je+Nz2U2BRPecpjUkEDJ4rN1C8ZiqW6mJslsHmLE/NSax0uT9jX7V
 VK9Z6GJ2b7Yl/myf4DVyD6amN4EA8jK0U2q5tb3zI7boZG0RHauAfcStn1lKPBQV
 oBycIDPkcEbwOHRBimB3VIXJYcnVR0xEqiReU79tN2JZKKirlmkPmRfMVx2pS0Vc
 5EvYigzVo0u0cC+Y7aEHpi4prEWaG+xw/6Y8l5QQ+BL4rJbNoL1281HT0m/v5YT2
 x+N1uSDhc5vtRXGcSMadHl7DLDO9Wxh8WpI9bZ9aRvyy9xiUwAG/vaXSpoUIyOrH
 GRKuXXc=
 =76zg
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 5.6

*) Add support in PHY core to create link between PHY consumer and PHY
   provider
*) Add DisplayPort PHY configuration set to be used for negotiating the
   configurations to be used between DisplayPort controller and
   DisplayPort PHY
*) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for
   TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for
   J721E SoC (Supports USB and PCIe)
*) Add PHY driver for eMMC PHY in Intel LGM SoC
*) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new
   Synopsys USB Controller
*) Add support for 16nm SATA PHY present in Broadcom 7216 SoC
*) Fix lost packet issue, fix MDIO from getting inaccessible, fix
   occasional transaction failures, fix USB driver from crashing in
   Broadcom USB PHY driver
*) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150
*) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from
   display controller to rockchip-inno-dsidphy
*) Other cleanups including compile testing for some of the PHY drivers,
   fixing Kconfig indentation, duplicate writes in drivers etc.,

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (54 commits)
  dt-bindings: phy: Add PHY_TYPE_DP definition
  phy: ti: j721e-wiz: Fix return value check in wiz_probe()
  dt-bindings: usb: Convert Allwinner A80 USB PHY controller to a schema
  phy: intel-lgm-emmc: Fix warning by adding missing MODULE_LICENSE
  phy: ti: j721e-wiz: Manage typec-gpio-dir
  dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO
  phy: cadence: Sierra: add phy_reset hook
  phy: cadence: Sierra: remove redundant initialization of pointer regmap
  phy: Add DisplayPort configuration options
  phy: Enable compile testing for some of drivers
  phy: mediatek: Fix Kconfig indentation
  phy: intel-lgm-emmc: Add support for eMMC PHY
  dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY
  phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC
  dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
  phy: cadence: Sierra: Use correct dev pointer in cdns_sierra_phy_remove()
  phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency to 25MHz
  phy: cadence: Sierra: Change MAX_LANES of Sierra to 16
  phy: cadence: Sierra: Check for PLL lock during PHY power on
  phy: cadence: Sierra: Get reset control "array" for each link
  ...
2020-01-17 07:52:26 +01:00

76 lines
1.5 KiB
C

// SPDX-License-Identifier: GPL-1.0+
/*
* Renesas USB driver R-Car Gen. 2 initialization and power control
*
* Copyright (C) 2014 Ulrich Hecht
* Copyright (C) 2019 Renesas Electronics Corporation
*/
#include <linux/phy/phy.h>
#include "common.h"
#include "rcar2.h"
static int usbhs_rcar2_hardware_init(struct platform_device *pdev)
{
struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
if (IS_ENABLED(CONFIG_GENERIC_PHY)) {
struct phy *phy = phy_get(&pdev->dev, "usb");
if (IS_ERR(phy))
return PTR_ERR(phy);
priv->phy = phy;
return 0;
}
return -ENXIO;
}
static int usbhs_rcar2_hardware_exit(struct platform_device *pdev)
{
struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
if (priv->phy) {
phy_put(&pdev->dev, priv->phy);
priv->phy = NULL;
}
return 0;
}
static int usbhs_rcar2_power_ctrl(struct platform_device *pdev,
void __iomem *base, int enable)
{
struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
int retval = -ENODEV;
if (priv->phy) {
if (enable) {
retval = phy_init(priv->phy);
if (!retval)
retval = phy_power_on(priv->phy);
} else {
phy_power_off(priv->phy);
phy_exit(priv->phy);
retval = 0;
}
}
return retval;
}
const struct renesas_usbhs_platform_info usbhs_rcar_gen2_plat_info = {
.platform_callback = {
.hardware_init = usbhs_rcar2_hardware_init,
.hardware_exit = usbhs_rcar2_hardware_exit,
.power_ctrl = usbhs_rcar2_power_ctrl,
.get_id = usbhs_get_id_as_gadget,
},
.driver_param = {
.has_usb_dmac = 1,
.has_new_pipe_configs = 1,
},
};