linux/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
Attila Szöllősi 5567f9ddaf ARM: dts: qcom: msm8974: Add Sony Xperia Z1 Compact
This patch adds a DTS file for Sony Xperia Z1 Compact with support for
regulators, serial UART, eMMC/SD-card, USB, charger, backlight,
coincell and buttons.

Work based on arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts.

Signed-off-by: Attila Szöllősi <ata2001@airmail.cc>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-24 23:39:02 -05:00

437 lines
8.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974.dtsi"
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "Sony Xperia Z1 Compact";
compatible = "sony,xperia-amami", "qcom,msm8974";
aliases {
serial0 = &blsp1_uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
input-name = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
camera-focus {
label = "camera_focus";
gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
};
};
memory@0 {
reg = <0 0x40000000>, <0x40000000 0x40000000>;
device_type = "memory";
};
smd {
rpm {
rpm_requests {
pm8841-regulators {
s1 {
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <1050000>;
};
s2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1050000>;
};
s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1050000>;
};
s4 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1050000>;
};
};
pm8941-regulators {
vdd_l1_l3-supply = <&pm8941_s1>;
vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
vdd_l4_l11-supply = <&pm8941_s1>;
vdd_l5_l7-supply = <&pm8941_s2>;
vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
vdd_l21-supply = <&vreg_boost>;
s1 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
s2 {
regulator-min-microvolt = <2150000>;
regulator-max-microvolt = <2150000>;
regulator-boot-on;
};
s3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
s4 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
regulator-always-on;
regulator-boot-on;
};
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l4 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
l11 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1350000>;
};
l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
l13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
regulator-boot-on;
};
l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l15 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
l16 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
l17 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
l18 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
l19 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
l20 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
regulator-boot-on;
regulator-system-load = <200000>;
};
l21 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-boot-on;
};
l22 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
l23 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
l24 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
regulator-boot-on;
};
};
};
};
};
};
&soc {
sdhci@f9824900 {
status = "ok";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
bus-width = <8>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdhc1_pin_a>;
};
sdhci@f98a4900 {
status = "ok";
bus-width = <4>;
vmmc-supply = <&pm8941_l21>;
vqmmc-supply = <&pm8941_l13>;
cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
};
serial@f991e000 {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart2_pin_a>;
};
pinctrl@fd510000 {
blsp1_uart2_pin_a: blsp1-uart2-pin-active {
rx {
pins = "gpio5";
function = "blsp_uart2";
drive-strength = <2>;
bias-pull-up;
};
tx {
pins = "gpio4";
function = "blsp_uart2";
drive-strength = <4>;
bias-disable;
};
};
i2c2_pins: i2c2 {
mux {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
};
sdhc1_pin_a: sdhc1-pin-active {
clk {
pins = "sdc1_clk";
drive-strength = <16>;
bias-disable;
};
cmd-data {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdhc2_cd_pin_a: sdhc2-cd-pin-active {
pins = "gpio62";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
sdhc2_pin_a: sdhc2-pin-active {
clk {
pins = "sdc2_clk";
drive-strength = <10>;
bias-disable;
};
cmd-data {
pins = "sdc2_cmd", "sdc2_data";
drive-strength = <6>;
bias-pull-up;
};
};
};
dma-controller@f9944000 {
qcom,controlled-remotely;
};
usb@f9a55000 {
status = "ok";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
extcon = <&smbb>, <&usb_id>;
vbus-supply = <&chg_otg>;
hnp-disable;
srp-disable;
adp-disable;
ulpi {
phy@a {
status = "ok";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
extcon = <&smbb>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};
};
};
};
&spmi_bus {
pm8941@0 {
charger@1000 {
qcom,fast-charge-safe-current = <1300000>;
qcom,fast-charge-current-limit = <1300000>;
qcom,dc-current-limit = <1300000>;
qcom,fast-charge-safe-voltage = <4400000>;
qcom,fast-charge-high-threshold-voltage = <4350000>;
qcom,fast-charge-low-threshold-voltage = <3400000>;
qcom,auto-recharge-threshold-voltage = <4200000>;
qcom,minimum-input-voltage = <4300000>;
};
gpios@c000 {
gpio_keys_pin_a: gpio-keys-active {
pins = "gpio2", "gpio3", "gpio4", "gpio5";
function = "normal";
bias-pull-up;
power-source = <PM8941_GPIO_S3>;
};
};
coincell@2800 {
status = "ok";
qcom,rset-ohms = <2100>;
qcom,vset-millivolts = <3000>;
};
};
pm8941@1 {
wled@d800 {
status = "ok";
qcom,cs-out;
qcom,current-limit = <20>;
qcom,current-boost-limit = <805>;
qcom,switching-freq = <1600>;
qcom,ovp = <29>;
qcom,num-strings = <2>;
};
};
};