linux/arch/arm/mach-s3c64xx/common.c
Ulf Hansson d40fce7e62 ARM: s3c64xx: Leave disabling of unused PM domains to genpd
Since genpd at late init, will try to disable unused PM domains we
don't need to do it from the machine specific code as well.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09 00:46:12 +02:00

443 lines
10 KiB
C

/*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* Common Codes for S3C64XX machines
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* NOTE: Code in this file is not used when booting with Device Tree support.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/clk-provider.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/irqchip/arm-vic.h>
#include <clocksource/samsung_pwm.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/map.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/gpio-cfg.h>
#include <plat/irq-uart.h>
#include <plat/pwm-core.h>
#include <plat/regs-irqtype.h>
#include <plat/watchdog-reset.h>
#include "common.h"
/* External clock frequency */
static unsigned long xtal_f = 12000000, xusbxti_f = 48000000;
void __init s3c64xx_set_xtal_freq(unsigned long freq)
{
xtal_f = freq;
}
void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
{
xusbxti_f = freq;
}
/* uart registration process */
static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
}
/* table of supported CPUs */
static const char name_s3c6400[] = "S3C6400";
static const char name_s3c6410[] = "S3C6410";
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = S3C6400_CPU_ID,
.idmask = S3C64XX_CPU_MASK,
.map_io = s3c6400_map_io,
.init_uarts = s3c64xx_init_uarts,
.init = s3c6400_init,
.name = name_s3c6400,
}, {
.idcode = S3C6410_CPU_ID,
.idmask = S3C64XX_CPU_MASK,
.map_io = s3c6410_map_io,
.init_uarts = s3c64xx_init_uarts,
.init = s3c6410_init,
.name = name_s3c6410,
},
};
/* minimal IO mapping */
/* see notes on uart map in arch/arm/mach-s3c64xx/include/mach/debug-macro.S */
#define UART_OFFS (S3C_PA_UART & 0xfffff)
static struct map_desc s3c_iodesc[] __initdata = {
{
.virtual = (unsigned long)S3C_VA_SYS,
.pfn = __phys_to_pfn(S3C64XX_PA_SYSCON),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_MEM,
.pfn = __phys_to_pfn(S3C64XX_PA_SROM),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)(S3C_VA_UART + UART_OFFS),
.pfn = __phys_to_pfn(S3C_PA_UART),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)VA_VIC0,
.pfn = __phys_to_pfn(S3C64XX_PA_VIC0),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)VA_VIC1,
.pfn = __phys_to_pfn(S3C64XX_PA_VIC1),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_TIMER,
.pfn = __phys_to_pfn(S3C_PA_TIMER),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C64XX_VA_GPIO,
.pfn = __phys_to_pfn(S3C64XX_PA_GPIO),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C64XX_VA_MODEM,
.pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_WATCHDOG,
.pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_USB_HSPHY,
.pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
.length = SZ_1K,
.type = MT_DEVICE,
},
};
static struct bus_type s3c64xx_subsys = {
.name = "s3c64xx-core",
.dev_name = "s3c64xx-core",
};
static struct device s3c64xx_dev = {
.bus = &s3c64xx_subsys,
};
static struct samsung_pwm_variant s3c64xx_pwm_variant = {
.bits = 32,
.div_base = 0,
.has_tint_cstat = true,
.tclk_mask = (1 << 7) | (1 << 6) | (1 << 5),
};
void __init samsung_set_timer_source(unsigned int event, unsigned int source)
{
s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
}
void __init samsung_timer_init(void)
{
unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
};
samsung_pwm_clocksource_init(S3C_VA_TIMER,
timer_irqs, &s3c64xx_pwm_variant);
}
/* read cpu identification code */
void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
{
/* initialise the io descriptors we need for initialisation */
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
iotable_init(mach_desc, size);
/* detect cpu id */
s3c64xx_init_cpu();
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
samsung_pwm_set_platdata(&s3c64xx_pwm_variant);
}
static __init int s3c64xx_dev_init(void)
{
/* Not applicable when using DT. */
if (of_have_populated_dt())
return 0;
subsys_system_register(&s3c64xx_subsys, NULL);
return device_register(&s3c64xx_dev);
}
core_initcall(s3c64xx_dev_init);
/*
* setup the sources the vic should advertise resume
* for, even though it is not doing the wake
* (set_irq_wake needs to be valid)
*/
#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \
1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \
1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \
1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
{
/*
* FIXME: there is no better place to put this at the moment
* (s3c64xx_clk_init needs ioremap and must happen before init_time
* samsung_wdt_reset_init needs clocks)
*/
s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
samsung_wdt_reset_init(S3C_VA_WATCHDOG);
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
/* initialise the pair of VICs */
vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
}
#define eint_offset(irq) ((irq) - IRQ_EINT(0))
#define eint_irq_to_bit(irq) ((u32)(1 << eint_offset(irq)))
static inline void s3c_irq_eint_mask(struct irq_data *data)
{
u32 mask;
mask = __raw_readl(S3C64XX_EINT0MASK);
mask |= (u32)data->chip_data;
__raw_writel(mask, S3C64XX_EINT0MASK);
}
static void s3c_irq_eint_unmask(struct irq_data *data)
{
u32 mask;
mask = __raw_readl(S3C64XX_EINT0MASK);
mask &= ~((u32)data->chip_data);
__raw_writel(mask, S3C64XX_EINT0MASK);
}
static inline void s3c_irq_eint_ack(struct irq_data *data)
{
__raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND);
}
static void s3c_irq_eint_maskack(struct irq_data *data)
{
/* compiler should in-line these */
s3c_irq_eint_mask(data);
s3c_irq_eint_ack(data);
}
static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type)
{
int offs = eint_offset(data->irq);
int pin, pin_val;
int shift;
u32 ctrl, mask;
u32 newvalue = 0;
void __iomem *reg;
if (offs > 27)
return -EINVAL;
if (offs <= 15)
reg = S3C64XX_EINT0CON0;
else
reg = S3C64XX_EINT0CON1;
switch (type) {
case IRQ_TYPE_NONE:
printk(KERN_WARNING "No edge setting!\n");
break;
case IRQ_TYPE_EDGE_RISING:
newvalue = S3C2410_EXTINT_RISEEDGE;
break;
case IRQ_TYPE_EDGE_FALLING:
newvalue = S3C2410_EXTINT_FALLEDGE;
break;
case IRQ_TYPE_EDGE_BOTH:
newvalue = S3C2410_EXTINT_BOTHEDGE;
break;
case IRQ_TYPE_LEVEL_LOW:
newvalue = S3C2410_EXTINT_LOWLEV;
break;
case IRQ_TYPE_LEVEL_HIGH:
newvalue = S3C2410_EXTINT_HILEV;
break;
default:
printk(KERN_ERR "No such irq type %d", type);
return -1;
}
if (offs <= 15)
shift = (offs / 2) * 4;
else
shift = ((offs - 16) / 2) * 4;
mask = 0x7 << shift;
ctrl = __raw_readl(reg);
ctrl &= ~mask;
ctrl |= newvalue << shift;
__raw_writel(ctrl, reg);
/* set the GPIO pin appropriately */
if (offs < 16) {
pin = S3C64XX_GPN(offs);
pin_val = S3C_GPIO_SFN(2);
} else if (offs < 23) {
pin = S3C64XX_GPL(offs + 8 - 16);
pin_val = S3C_GPIO_SFN(3);
} else {
pin = S3C64XX_GPM(offs - 23);
pin_val = S3C_GPIO_SFN(3);
}
s3c_gpio_cfgpin(pin, pin_val);
return 0;
}
static struct irq_chip s3c_irq_eint = {
.name = "s3c-eint",
.irq_mask = s3c_irq_eint_mask,
.irq_unmask = s3c_irq_eint_unmask,
.irq_mask_ack = s3c_irq_eint_maskack,
.irq_ack = s3c_irq_eint_ack,
.irq_set_type = s3c_irq_eint_set_type,
.irq_set_wake = s3c_irqext_wake,
};
/* s3c_irq_demux_eint
*
* This function demuxes the IRQ from the group0 external interrupts,
* from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
* the specific handlers s3c_irq_demux_eintX_Y.
*/
static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
{
u32 status = __raw_readl(S3C64XX_EINT0PEND);
u32 mask = __raw_readl(S3C64XX_EINT0MASK);
unsigned int irq;
status &= ~mask;
status >>= start;
status &= (1 << (end - start + 1)) - 1;
for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
if (status & 1)
generic_handle_irq(irq);
status >>= 1;
}
}
static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
{
s3c_irq_demux_eint(0, 3);
}
static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
{
s3c_irq_demux_eint(4, 11);
}
static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
{
s3c_irq_demux_eint(12, 19);
}
static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
{
s3c_irq_demux_eint(20, 27);
}
static int __init s3c64xx_init_irq_eint(void)
{
int irq;
/* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
if (of_have_populated_dt())
return -ENODEV;
for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
set_irq_flags(irq, IRQF_VALID);
}
irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
return 0;
}
arch_initcall(s3c64xx_init_irq_eint);
void s3c64xx_restart(enum reboot_mode mode, const char *cmd)
{
if (mode != REBOOT_SOFT)
samsung_wdt_reset();
/* if all else fails, or mode was for soft, jump to 0 */
soft_restart(0);
}