mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
9798f5178f
Core changes: - Disallow open drain and open source flags to be set simultaneously. This doesn't make electrical sense, and would the hardware actually respond to this setting, the result would be short circuit. - ACPI GPIO has a new core infrastructure for handling quirks. The quirks are there to deal with broken ACPI tables centrally instead of pushing the work to individual drivers. In the world of BIOS writers, the ACPI tables are perfect. Until they find a mistake in it. When such a mistake is found, we can patch it with a quirk. It should never happen, the problem is that it happens. So we accomodate for it. - Several documentation updates. - Revert the patch setting up initial direction state from reading the device. This was causing bad things for drivers that can't read status on all its pins. It is only affecting debugfs information quality. - Label descriptors with the device name if no explicit label is passed in. - Pave the ground for transitioning SPI and regulators to use GPIO descriptors by implementing some quirks in the device tree GPIO parsing code. New drivers: - New driver for the Access PCIe IDIO 24 family. Other: - Major refactorings and improvements to the GPIO mockup driver used for test and verification. - Moved the AXP209 driver over to pin control since it gained a pin control back-end. These patches will appear (with the same hashes) in the pin control pull request as well. - Convert the onewire GPIO driver w1-gpio to use descriptors. This is merged here since the W1 maintainers send very few pull requests and he ACKed it. - Start to clean up driver headers using <linux/gpio.h> to just use <linux/gpio/driver.h> as appropriate. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJacIW6AAoJEEEQszewGV1z9b0P/jxWKaCAGFTTu/HZQ79RBAFq w33nIazzoh+88sN7A9xKexpr4ibOxiCvOwkTtrUBNaxGGy5fslj4+OY5BzunEfBK 1vYxyEqtenvvZK03pOd6CSfHKV+vD5ngnVHGdtGzRvtmDDiSgtzqyEyUhQcXM+l7 PrEh6qrd4TBZezlVR8kn5eqcmclkCBVSQCuLSq+ThMmCKRZuOdf1Im3D6eBzh1/N P81HdcglqbSsfUl1RcFiHs9Z+KcZOq83CNl2Ej1LePK2JBZbmkx9dR+WSJmV1u4P 6wvzFcQDhfGEiiteg2BS5c+o6aAyShpuRNut+2MLre8icmdfpqUEqFotHbfQjW5y sqaejGsJ5aHcRBq7UUM+F9s1R0iN3tlafi3L0WEhl0Tn5huRQq3Uqcw6e5l+XrWd 0h+b5PbKJZO/iqzRhSl+rhc0V2CFDJOCwvY+JX6356fvrcF0T6LhvKfDYtKU3Iyb HB0RG1OcYe228f96azvafCkFyBIYX9mqHBvOXpQQgrZQYXfN1rupLvpOhxC+Wbvn nsGE2bdD6HA1bytTbkxbL+QWP7faHf5YVcZpaN7UWbO3sOzL46fj8eHwHUim95Tr pR5kDZRhZd8+9SCNZ/ttpaEbis9MOqS/3Mlxrj4GXtfFFmR53hjFy2bG/Z7R2RB0 MlSEJRc8iDIs+1j3D2RR =k5nL -----END PGP SIGNATURE----- Merge tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "The is the bulk of GPIO changes for the v4.16 kernel cycle. It is pretty calm this time around I think. I even got time to get to things like starting to clean up header includes. Core changes: - Disallow open drain and open source flags to be set simultaneously. This doesn't make electrical sense, and would the hardware actually respond to this setting, the result would be short circuit. - ACPI GPIO has a new core infrastructure for handling quirks. The quirks are there to deal with broken ACPI tables centrally instead of pushing the work to individual drivers. In the world of BIOS writers, the ACPI tables are perfect. Until they find a mistake in it. When such a mistake is found, we can patch it with a quirk. It should never happen, the problem is that it happens. So we accomodate for it. - Several documentation updates. - Revert the patch setting up initial direction state from reading the device. This was causing bad things for drivers that can't read status on all its pins. It is only affecting debugfs information quality. - Label descriptors with the device name if no explicit label is passed in. - Pave the ground for transitioning SPI and regulators to use GPIO descriptors by implementing some quirks in the device tree GPIO parsing code. New drivers: - New driver for the Access PCIe IDIO 24 family. Other: - Major refactorings and improvements to the GPIO mockup driver used for test and verification. - Moved the AXP209 driver over to pin control since it gained a pin control back-end. These patches will appear (with the same hashes) in the pin control pull request as well. - Convert the onewire GPIO driver w1-gpio to use descriptors. This is merged here since the W1 maintainers send very few pull requests and he ACKed it. - Start to clean up driver headers using <linux/gpio.h> to just use <linux/gpio/driver.h> as appropriate" * tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (103 commits) gpio: Timestamp events in hardirq handler gpio: Fix kernel stack leak to userspace gpio: Fix a documentation spelling mistake gpio: Documentation update gpiolib: remove redundant initialization of pointer desc gpio: of: Fix NPE from OF flags gpio: stmpe: Delete an unnecessary variable initialisation in stmpe_gpio_probe() gpio: stmpe: Move an assignment in stmpe_gpio_probe() gpio: stmpe: Improve a size determination in stmpe_gpio_probe() gpio: stmpe: Use seq_putc() in stmpe_dbg_show() gpio: No NULL owner gpio: stmpe: i2c transfer are forbiden in atomic context gpio: davinci: Include proper header gpio: da905x: Include proper header gpio: cs5535: Include proper header gpio: crystalcove: Include proper header gpio: bt8xx: Include proper header gpio: bcm-kona: Include proper header gpio: arizona: Include proper header gpio: amd8111: Include proper header ...
777 lines
20 KiB
C
777 lines
20 KiB
C
/*
|
|
* Copyright (C) 2015-2017 Broadcom
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/irqchip/chained_irq.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
enum gio_reg_index {
|
|
GIO_REG_ODEN = 0,
|
|
GIO_REG_DATA,
|
|
GIO_REG_IODIR,
|
|
GIO_REG_EC,
|
|
GIO_REG_EI,
|
|
GIO_REG_MASK,
|
|
GIO_REG_LEVEL,
|
|
GIO_REG_STAT,
|
|
NUMBER_OF_GIO_REGISTERS
|
|
};
|
|
|
|
#define GIO_BANK_SIZE (NUMBER_OF_GIO_REGISTERS * sizeof(u32))
|
|
#define GIO_BANK_OFF(bank, off) (((bank) * GIO_BANK_SIZE) + (off * sizeof(u32)))
|
|
#define GIO_ODEN(bank) GIO_BANK_OFF(bank, GIO_REG_ODEN)
|
|
#define GIO_DATA(bank) GIO_BANK_OFF(bank, GIO_REG_DATA)
|
|
#define GIO_IODIR(bank) GIO_BANK_OFF(bank, GIO_REG_IODIR)
|
|
#define GIO_EC(bank) GIO_BANK_OFF(bank, GIO_REG_EC)
|
|
#define GIO_EI(bank) GIO_BANK_OFF(bank, GIO_REG_EI)
|
|
#define GIO_MASK(bank) GIO_BANK_OFF(bank, GIO_REG_MASK)
|
|
#define GIO_LEVEL(bank) GIO_BANK_OFF(bank, GIO_REG_LEVEL)
|
|
#define GIO_STAT(bank) GIO_BANK_OFF(bank, GIO_REG_STAT)
|
|
|
|
struct brcmstb_gpio_bank {
|
|
struct list_head node;
|
|
int id;
|
|
struct gpio_chip gc;
|
|
struct brcmstb_gpio_priv *parent_priv;
|
|
u32 width;
|
|
u32 wake_active;
|
|
u32 saved_regs[GIO_REG_STAT]; /* Don't save and restore GIO_REG_STAT */
|
|
};
|
|
|
|
struct brcmstb_gpio_priv {
|
|
struct list_head bank_list;
|
|
void __iomem *reg_base;
|
|
struct platform_device *pdev;
|
|
struct irq_domain *irq_domain;
|
|
struct irq_chip irq_chip;
|
|
int parent_irq;
|
|
int gpio_base;
|
|
int num_gpios;
|
|
int parent_wake_irq;
|
|
};
|
|
|
|
#define MAX_GPIO_PER_BANK 32
|
|
#define GPIO_BANK(gpio) ((gpio) >> 5)
|
|
/* assumes MAX_GPIO_PER_BANK is a multiple of 2 */
|
|
#define GPIO_BIT(gpio) ((gpio) & (MAX_GPIO_PER_BANK - 1))
|
|
|
|
static inline struct brcmstb_gpio_priv *
|
|
brcmstb_gpio_gc_to_priv(struct gpio_chip *gc)
|
|
{
|
|
struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
|
|
return bank->parent_priv;
|
|
}
|
|
|
|
static unsigned long
|
|
__brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank)
|
|
{
|
|
void __iomem *reg_base = bank->parent_priv->reg_base;
|
|
|
|
return bank->gc.read_reg(reg_base + GIO_STAT(bank->id)) &
|
|
bank->gc.read_reg(reg_base + GIO_MASK(bank->id));
|
|
}
|
|
|
|
static unsigned long
|
|
brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank)
|
|
{
|
|
unsigned long status;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&bank->gc.bgpio_lock, flags);
|
|
status = __brcmstb_gpio_get_active_irqs(bank);
|
|
spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int brcmstb_gpio_hwirq_to_offset(irq_hw_number_t hwirq,
|
|
struct brcmstb_gpio_bank *bank)
|
|
{
|
|
return hwirq - (bank->gc.base - bank->parent_priv->gpio_base);
|
|
}
|
|
|
|
static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank,
|
|
unsigned int hwirq, bool enable)
|
|
{
|
|
struct gpio_chip *gc = &bank->gc;
|
|
struct brcmstb_gpio_priv *priv = bank->parent_priv;
|
|
u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(hwirq, bank));
|
|
u32 imask;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gc->bgpio_lock, flags);
|
|
imask = gc->read_reg(priv->reg_base + GIO_MASK(bank->id));
|
|
if (enable)
|
|
imask |= mask;
|
|
else
|
|
imask &= ~mask;
|
|
gc->write_reg(priv->reg_base + GIO_MASK(bank->id), imask);
|
|
spin_unlock_irqrestore(&gc->bgpio_lock, flags);
|
|
}
|
|
|
|
static int brcmstb_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
|
|
/* gc_offset is relative to this gpio_chip; want real offset */
|
|
int hwirq = offset + (gc->base - priv->gpio_base);
|
|
|
|
if (hwirq >= priv->num_gpios)
|
|
return -ENXIO;
|
|
return irq_create_mapping(priv->irq_domain, hwirq);
|
|
}
|
|
|
|
/* -------------------- IRQ chip functions -------------------- */
|
|
|
|
static void brcmstb_gpio_irq_mask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
|
|
|
|
brcmstb_gpio_set_imask(bank, d->hwirq, false);
|
|
}
|
|
|
|
static void brcmstb_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
|
|
|
|
brcmstb_gpio_set_imask(bank, d->hwirq, true);
|
|
}
|
|
|
|
static void brcmstb_gpio_irq_ack(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
|
|
struct brcmstb_gpio_priv *priv = bank->parent_priv;
|
|
u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank));
|
|
|
|
gc->write_reg(priv->reg_base + GIO_STAT(bank->id), mask);
|
|
}
|
|
|
|
static int brcmstb_gpio_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
|
|
struct brcmstb_gpio_priv *priv = bank->parent_priv;
|
|
u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank));
|
|
u32 edge_insensitive, iedge_insensitive;
|
|
u32 edge_config, iedge_config;
|
|
u32 level, ilevel;
|
|
unsigned long flags;
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
level = mask;
|
|
edge_config = 0;
|
|
edge_insensitive = 0;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
level = mask;
|
|
edge_config = mask;
|
|
edge_insensitive = 0;
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
level = 0;
|
|
edge_config = 0;
|
|
edge_insensitive = 0;
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
level = 0;
|
|
edge_config = mask;
|
|
edge_insensitive = 0;
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
level = 0;
|
|
edge_config = 0; /* don't care, but want known value */
|
|
edge_insensitive = mask;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&bank->gc.bgpio_lock, flags);
|
|
|
|
iedge_config = bank->gc.read_reg(priv->reg_base +
|
|
GIO_EC(bank->id)) & ~mask;
|
|
iedge_insensitive = bank->gc.read_reg(priv->reg_base +
|
|
GIO_EI(bank->id)) & ~mask;
|
|
ilevel = bank->gc.read_reg(priv->reg_base +
|
|
GIO_LEVEL(bank->id)) & ~mask;
|
|
|
|
bank->gc.write_reg(priv->reg_base + GIO_EC(bank->id),
|
|
iedge_config | edge_config);
|
|
bank->gc.write_reg(priv->reg_base + GIO_EI(bank->id),
|
|
iedge_insensitive | edge_insensitive);
|
|
bank->gc.write_reg(priv->reg_base + GIO_LEVEL(bank->id),
|
|
ilevel | level);
|
|
|
|
spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int brcmstb_gpio_priv_set_wake(struct brcmstb_gpio_priv *priv,
|
|
unsigned int enable)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (enable)
|
|
ret = enable_irq_wake(priv->parent_wake_irq);
|
|
else
|
|
ret = disable_irq_wake(priv->parent_wake_irq);
|
|
if (ret)
|
|
dev_err(&priv->pdev->dev, "failed to %s wake-up interrupt\n",
|
|
enable ? "enable" : "disable");
|
|
return ret;
|
|
}
|
|
|
|
static int brcmstb_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
|
|
struct brcmstb_gpio_priv *priv = bank->parent_priv;
|
|
u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank));
|
|
|
|
/*
|
|
* Do not do anything specific for now, suspend/resume callbacks will
|
|
* configure the interrupt mask appropriately
|
|
*/
|
|
if (enable)
|
|
bank->wake_active |= mask;
|
|
else
|
|
bank->wake_active &= ~mask;
|
|
|
|
return brcmstb_gpio_priv_set_wake(priv, enable);
|
|
}
|
|
|
|
static irqreturn_t brcmstb_gpio_wake_irq_handler(int irq, void *data)
|
|
{
|
|
struct brcmstb_gpio_priv *priv = data;
|
|
|
|
if (!priv || irq != priv->parent_wake_irq)
|
|
return IRQ_NONE;
|
|
|
|
/* Nothing to do */
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank)
|
|
{
|
|
struct brcmstb_gpio_priv *priv = bank->parent_priv;
|
|
struct irq_domain *domain = priv->irq_domain;
|
|
int hwbase = bank->gc.base - priv->gpio_base;
|
|
unsigned long status;
|
|
|
|
while ((status = brcmstb_gpio_get_active_irqs(bank))) {
|
|
unsigned int irq, offset;
|
|
|
|
for_each_set_bit(offset, &status, 32) {
|
|
if (offset >= bank->width)
|
|
dev_warn(&priv->pdev->dev,
|
|
"IRQ for invalid GPIO (bank=%d, offset=%d)\n",
|
|
bank->id, offset);
|
|
irq = irq_linear_revmap(domain, hwbase + offset);
|
|
generic_handle_irq(irq);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Each UPG GIO block has one IRQ for all banks */
|
|
static void brcmstb_gpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct brcmstb_gpio_priv *priv = irq_desc_get_handler_data(desc);
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
struct brcmstb_gpio_bank *bank;
|
|
|
|
/* Interrupts weren't properly cleared during probe */
|
|
BUG_ON(!priv || !chip);
|
|
|
|
chained_irq_enter(chip, desc);
|
|
list_for_each_entry(bank, &priv->bank_list, node)
|
|
brcmstb_gpio_irq_bank_handler(bank);
|
|
chained_irq_exit(chip, desc);
|
|
}
|
|
|
|
static struct brcmstb_gpio_bank *brcmstb_gpio_hwirq_to_bank(
|
|
struct brcmstb_gpio_priv *priv, irq_hw_number_t hwirq)
|
|
{
|
|
struct brcmstb_gpio_bank *bank;
|
|
int i = 0;
|
|
|
|
/* banks are in descending order */
|
|
list_for_each_entry_reverse(bank, &priv->bank_list, node) {
|
|
i += bank->gc.ngpio;
|
|
if (hwirq < i)
|
|
return bank;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* This lock class tells lockdep that GPIO irqs are in a different
|
|
* category than their parents, so it won't report false recursion.
|
|
*/
|
|
static struct lock_class_key brcmstb_gpio_irq_lock_class;
|
|
static struct lock_class_key brcmstb_gpio_irq_request_class;
|
|
|
|
|
|
static int brcmstb_gpio_irq_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
struct brcmstb_gpio_priv *priv = d->host_data;
|
|
struct brcmstb_gpio_bank *bank =
|
|
brcmstb_gpio_hwirq_to_bank(priv, hwirq);
|
|
struct platform_device *pdev = priv->pdev;
|
|
int ret;
|
|
|
|
if (!bank)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(&pdev->dev, "Mapping irq %d for gpio line %d (bank %d)\n",
|
|
irq, (int)hwirq, bank->id);
|
|
ret = irq_set_chip_data(irq, &bank->gc);
|
|
if (ret < 0)
|
|
return ret;
|
|
irq_set_lockdep_class(irq, &brcmstb_gpio_irq_lock_class,
|
|
&brcmstb_gpio_irq_request_class);
|
|
irq_set_chip_and_handler(irq, &priv->irq_chip, handle_level_irq);
|
|
irq_set_noprobe(irq);
|
|
return 0;
|
|
}
|
|
|
|
static void brcmstb_gpio_irq_unmap(struct irq_domain *d, unsigned int irq)
|
|
{
|
|
irq_set_chip_and_handler(irq, NULL, NULL);
|
|
irq_set_chip_data(irq, NULL);
|
|
}
|
|
|
|
static const struct irq_domain_ops brcmstb_gpio_irq_domain_ops = {
|
|
.map = brcmstb_gpio_irq_map,
|
|
.unmap = brcmstb_gpio_irq_unmap,
|
|
.xlate = irq_domain_xlate_twocell,
|
|
};
|
|
|
|
/* Make sure that the number of banks matches up between properties */
|
|
static int brcmstb_gpio_sanity_check_banks(struct device *dev,
|
|
struct device_node *np, struct resource *res)
|
|
{
|
|
int res_num_banks = resource_size(res) / GIO_BANK_SIZE;
|
|
int num_banks =
|
|
of_property_count_u32_elems(np, "brcm,gpio-bank-widths");
|
|
|
|
if (res_num_banks != num_banks) {
|
|
dev_err(dev, "Mismatch in banks: res had %d, bank-widths had %d\n",
|
|
res_num_banks, num_banks);
|
|
return -EINVAL;
|
|
} else {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int brcmstb_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct brcmstb_gpio_priv *priv = platform_get_drvdata(pdev);
|
|
struct brcmstb_gpio_bank *bank;
|
|
int offset, ret = 0, virq;
|
|
|
|
if (!priv) {
|
|
dev_err(&pdev->dev, "called %s without drvdata!\n", __func__);
|
|
return -EFAULT;
|
|
}
|
|
|
|
if (priv->parent_irq > 0)
|
|
irq_set_chained_handler_and_data(priv->parent_irq, NULL, NULL);
|
|
|
|
/* Remove all IRQ mappings and delete the domain */
|
|
if (priv->irq_domain) {
|
|
for (offset = 0; offset < priv->num_gpios; offset++) {
|
|
virq = irq_find_mapping(priv->irq_domain, offset);
|
|
irq_dispose_mapping(virq);
|
|
}
|
|
irq_domain_remove(priv->irq_domain);
|
|
}
|
|
|
|
/*
|
|
* You can lose return values below, but we report all errors, and it's
|
|
* more important to actually perform all of the steps.
|
|
*/
|
|
list_for_each_entry(bank, &priv->bank_list, node)
|
|
gpiochip_remove(&bank->gc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int brcmstb_gpio_of_xlate(struct gpio_chip *gc,
|
|
const struct of_phandle_args *gpiospec, u32 *flags)
|
|
{
|
|
struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
|
|
struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc);
|
|
int offset;
|
|
|
|
if (gc->of_gpio_n_cells != 2) {
|
|
WARN_ON(1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
|
|
return -EINVAL;
|
|
|
|
offset = gpiospec->args[0] - (gc->base - priv->gpio_base);
|
|
if (offset >= gc->ngpio || offset < 0)
|
|
return -EINVAL;
|
|
|
|
if (unlikely(offset >= bank->width)) {
|
|
dev_warn_ratelimited(&priv->pdev->dev,
|
|
"Received request for invalid GPIO offset %d\n",
|
|
gpiospec->args[0]);
|
|
}
|
|
|
|
if (flags)
|
|
*flags = gpiospec->args[1];
|
|
|
|
return offset;
|
|
}
|
|
|
|
/* priv->parent_irq and priv->num_gpios must be set before calling */
|
|
static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
|
|
struct brcmstb_gpio_priv *priv)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
int err;
|
|
|
|
priv->irq_domain =
|
|
irq_domain_add_linear(np, priv->num_gpios,
|
|
&brcmstb_gpio_irq_domain_ops,
|
|
priv);
|
|
if (!priv->irq_domain) {
|
|
dev_err(dev, "Couldn't allocate IRQ domain\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
if (of_property_read_bool(np, "wakeup-source")) {
|
|
priv->parent_wake_irq = platform_get_irq(pdev, 1);
|
|
if (priv->parent_wake_irq < 0) {
|
|
priv->parent_wake_irq = 0;
|
|
dev_warn(dev,
|
|
"Couldn't get wake IRQ - GPIOs will not be able to wake from sleep");
|
|
} else {
|
|
/*
|
|
* Set wakeup capability so we can process boot-time
|
|
* "wakeups" (e.g., from S5 cold boot)
|
|
*/
|
|
device_set_wakeup_capable(dev, true);
|
|
device_wakeup_enable(dev);
|
|
err = devm_request_irq(dev, priv->parent_wake_irq,
|
|
brcmstb_gpio_wake_irq_handler,
|
|
IRQF_SHARED,
|
|
"brcmstb-gpio-wake", priv);
|
|
|
|
if (err < 0) {
|
|
dev_err(dev, "Couldn't request wake IRQ");
|
|
goto out_free_domain;
|
|
}
|
|
}
|
|
}
|
|
|
|
priv->irq_chip.name = dev_name(dev);
|
|
priv->irq_chip.irq_disable = brcmstb_gpio_irq_mask;
|
|
priv->irq_chip.irq_mask = brcmstb_gpio_irq_mask;
|
|
priv->irq_chip.irq_unmask = brcmstb_gpio_irq_unmask;
|
|
priv->irq_chip.irq_ack = brcmstb_gpio_irq_ack;
|
|
priv->irq_chip.irq_set_type = brcmstb_gpio_irq_set_type;
|
|
|
|
if (priv->parent_wake_irq)
|
|
priv->irq_chip.irq_set_wake = brcmstb_gpio_irq_set_wake;
|
|
|
|
irq_set_chained_handler_and_data(priv->parent_irq,
|
|
brcmstb_gpio_irq_handler, priv);
|
|
irq_set_status_flags(priv->parent_irq, IRQ_DISABLE_UNLAZY);
|
|
|
|
return 0;
|
|
|
|
out_free_domain:
|
|
irq_domain_remove(priv->irq_domain);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void brcmstb_gpio_bank_save(struct brcmstb_gpio_priv *priv,
|
|
struct brcmstb_gpio_bank *bank)
|
|
{
|
|
struct gpio_chip *gc = &bank->gc;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < GIO_REG_STAT; i++)
|
|
bank->saved_regs[i] = gc->read_reg(priv->reg_base +
|
|
GIO_BANK_OFF(bank->id, i));
|
|
}
|
|
|
|
static void brcmstb_gpio_quiesce(struct device *dev, bool save)
|
|
{
|
|
struct brcmstb_gpio_priv *priv = dev_get_drvdata(dev);
|
|
struct brcmstb_gpio_bank *bank;
|
|
struct gpio_chip *gc;
|
|
u32 imask;
|
|
|
|
/* disable non-wake interrupt */
|
|
if (priv->parent_irq >= 0)
|
|
disable_irq(priv->parent_irq);
|
|
|
|
list_for_each_entry(bank, &priv->bank_list, node) {
|
|
gc = &bank->gc;
|
|
|
|
if (save)
|
|
brcmstb_gpio_bank_save(priv, bank);
|
|
|
|
/* Unmask GPIOs which have been flagged as wake-up sources */
|
|
if (priv->parent_wake_irq)
|
|
imask = bank->wake_active;
|
|
else
|
|
imask = 0;
|
|
gc->write_reg(priv->reg_base + GIO_MASK(bank->id),
|
|
imask);
|
|
}
|
|
}
|
|
|
|
static void brcmstb_gpio_shutdown(struct platform_device *pdev)
|
|
{
|
|
/* Enable GPIO for S5 cold boot */
|
|
brcmstb_gpio_quiesce(&pdev->dev, false);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static void brcmstb_gpio_bank_restore(struct brcmstb_gpio_priv *priv,
|
|
struct brcmstb_gpio_bank *bank)
|
|
{
|
|
struct gpio_chip *gc = &bank->gc;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < GIO_REG_STAT; i++)
|
|
gc->write_reg(priv->reg_base + GIO_BANK_OFF(bank->id, i),
|
|
bank->saved_regs[i]);
|
|
}
|
|
|
|
static int brcmstb_gpio_suspend(struct device *dev)
|
|
{
|
|
brcmstb_gpio_quiesce(dev, true);
|
|
return 0;
|
|
}
|
|
|
|
static int brcmstb_gpio_resume(struct device *dev)
|
|
{
|
|
struct brcmstb_gpio_priv *priv = dev_get_drvdata(dev);
|
|
struct brcmstb_gpio_bank *bank;
|
|
bool need_wakeup_event = false;
|
|
|
|
list_for_each_entry(bank, &priv->bank_list, node) {
|
|
need_wakeup_event |= !!__brcmstb_gpio_get_active_irqs(bank);
|
|
brcmstb_gpio_bank_restore(priv, bank);
|
|
}
|
|
|
|
if (priv->parent_wake_irq && need_wakeup_event)
|
|
pm_wakeup_event(dev, 0);
|
|
|
|
/* enable non-wake interrupt */
|
|
if (priv->parent_irq >= 0)
|
|
enable_irq(priv->parent_irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define brcmstb_gpio_suspend NULL
|
|
#define brcmstb_gpio_resume NULL
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static const struct dev_pm_ops brcmstb_gpio_pm_ops = {
|
|
.suspend_noirq = brcmstb_gpio_suspend,
|
|
.resume_noirq = brcmstb_gpio_resume,
|
|
};
|
|
|
|
static int brcmstb_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
void __iomem *reg_base;
|
|
struct brcmstb_gpio_priv *priv;
|
|
struct resource *res;
|
|
struct property *prop;
|
|
const __be32 *p;
|
|
u32 bank_width;
|
|
int num_banks = 0;
|
|
int err;
|
|
static int gpio_base;
|
|
unsigned long flags = 0;
|
|
bool need_wakeup_event = false;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
platform_set_drvdata(pdev, priv);
|
|
INIT_LIST_HEAD(&priv->bank_list);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
reg_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(reg_base))
|
|
return PTR_ERR(reg_base);
|
|
|
|
priv->gpio_base = gpio_base;
|
|
priv->reg_base = reg_base;
|
|
priv->pdev = pdev;
|
|
|
|
if (of_property_read_bool(np, "interrupt-controller")) {
|
|
priv->parent_irq = platform_get_irq(pdev, 0);
|
|
if (priv->parent_irq <= 0) {
|
|
dev_err(dev, "Couldn't get IRQ");
|
|
return -ENOENT;
|
|
}
|
|
} else {
|
|
priv->parent_irq = -ENOENT;
|
|
}
|
|
|
|
if (brcmstb_gpio_sanity_check_banks(dev, np, res))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* MIPS endianness is configured by boot strap, which also reverses all
|
|
* bus endianness (i.e., big-endian CPU + big endian bus ==> native
|
|
* endian I/O).
|
|
*
|
|
* Other architectures (e.g., ARM) either do not support big endian, or
|
|
* else leave I/O in little endian mode.
|
|
*/
|
|
#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
|
|
flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
|
|
#endif
|
|
|
|
of_property_for_each_u32(np, "brcm,gpio-bank-widths", prop, p,
|
|
bank_width) {
|
|
struct brcmstb_gpio_bank *bank;
|
|
struct gpio_chip *gc;
|
|
|
|
bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL);
|
|
if (!bank) {
|
|
err = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
bank->parent_priv = priv;
|
|
bank->id = num_banks;
|
|
if (bank_width <= 0 || bank_width > MAX_GPIO_PER_BANK) {
|
|
dev_err(dev, "Invalid bank width %d\n", bank_width);
|
|
err = -EINVAL;
|
|
goto fail;
|
|
} else {
|
|
bank->width = bank_width;
|
|
}
|
|
|
|
/*
|
|
* Regs are 4 bytes wide, have data reg, no set/clear regs,
|
|
* and direction bits have 0 = output and 1 = input
|
|
*/
|
|
gc = &bank->gc;
|
|
err = bgpio_init(gc, dev, 4,
|
|
reg_base + GIO_DATA(bank->id),
|
|
NULL, NULL, NULL,
|
|
reg_base + GIO_IODIR(bank->id), flags);
|
|
if (err) {
|
|
dev_err(dev, "bgpio_init() failed\n");
|
|
goto fail;
|
|
}
|
|
|
|
gc->of_node = np;
|
|
gc->owner = THIS_MODULE;
|
|
gc->label = devm_kasprintf(dev, GFP_KERNEL, "%pOF", dev->of_node);
|
|
if (!gc->label) {
|
|
err = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
gc->base = gpio_base;
|
|
gc->of_gpio_n_cells = 2;
|
|
gc->of_xlate = brcmstb_gpio_of_xlate;
|
|
/* not all ngpio lines are valid, will use bank width later */
|
|
gc->ngpio = MAX_GPIO_PER_BANK;
|
|
if (priv->parent_irq > 0)
|
|
gc->to_irq = brcmstb_gpio_to_irq;
|
|
|
|
/*
|
|
* Mask all interrupts by default, since wakeup interrupts may
|
|
* be retained from S5 cold boot
|
|
*/
|
|
need_wakeup_event |= !!__brcmstb_gpio_get_active_irqs(bank);
|
|
gc->write_reg(reg_base + GIO_MASK(bank->id), 0);
|
|
|
|
err = gpiochip_add_data(gc, bank);
|
|
if (err) {
|
|
dev_err(dev, "Could not add gpiochip for bank %d\n",
|
|
bank->id);
|
|
goto fail;
|
|
}
|
|
gpio_base += gc->ngpio;
|
|
|
|
dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id,
|
|
gc->base, gc->ngpio, bank->width);
|
|
|
|
/* Everything looks good, so add bank to list */
|
|
list_add(&bank->node, &priv->bank_list);
|
|
|
|
num_banks++;
|
|
}
|
|
|
|
priv->num_gpios = gpio_base - priv->gpio_base;
|
|
if (priv->parent_irq > 0) {
|
|
err = brcmstb_gpio_irq_setup(pdev, priv);
|
|
if (err)
|
|
goto fail;
|
|
}
|
|
|
|
dev_info(dev, "Registered %d banks (GPIO(s): %d-%d)\n",
|
|
num_banks, priv->gpio_base, gpio_base - 1);
|
|
|
|
if (priv->parent_wake_irq && need_wakeup_event)
|
|
pm_wakeup_event(dev, 0);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
(void) brcmstb_gpio_remove(pdev);
|
|
return err;
|
|
}
|
|
|
|
static const struct of_device_id brcmstb_gpio_of_match[] = {
|
|
{ .compatible = "brcm,brcmstb-gpio" },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, brcmstb_gpio_of_match);
|
|
|
|
static struct platform_driver brcmstb_gpio_driver = {
|
|
.driver = {
|
|
.name = "brcmstb-gpio",
|
|
.of_match_table = brcmstb_gpio_of_match,
|
|
.pm = &brcmstb_gpio_pm_ops,
|
|
},
|
|
.probe = brcmstb_gpio_probe,
|
|
.remove = brcmstb_gpio_remove,
|
|
.shutdown = brcmstb_gpio_shutdown,
|
|
};
|
|
module_platform_driver(brcmstb_gpio_driver);
|
|
|
|
MODULE_AUTHOR("Gregory Fong");
|
|
MODULE_DESCRIPTION("Driver for Broadcom BRCMSTB SoC UPG GPIO");
|
|
MODULE_LICENSE("GPL v2");
|