linux/drivers/scsi/aacraid/dpcsup.c
Penchala Narasimha Reddy Chilakala, ERS-HCLTech cacb6dc3d7 [SCSI] aacraid: fix File System going into read-only mode
These particular problems were reported by Cisco and SAP and customers
as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and
SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build
to IBM and Cisco. Cisco and IBM tested it for more than 15 days and
they reported that they did not see the issue so far. Before the fix,
Cisco used to see the issue within 5 days. We generated a patch for
SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the
patch and gave a test build to SAP. SAP tested and reported that the
build is working properly.

We also tested in our lab using the tools "dishogsync", which is IO
stress tool and the tool was provided by Cisco.

Issue1:  File System going into read-only mode

Root cause: The driver tends to not free the memory (FIB) when the
management request exits prematurely. The accumulation of such
un-freed memory causes the driver to fail to allocate anymore memory
(FIB) and hence return 0x70000 value to the upper layer, which puts
the file system into read only mode.

Fix details: The fix makes sure to free the memory (FIB) even if the
request exits prematurely hence ensuring the driver wouldn't run out
of memory (FIBs).


Issue2: False Raid Alert occurs

When the Physical Drives and Logical drives are reported as deleted or
added, even though there is no change done on the system

Root cause: Driver IOCTLs is signaled with EINTR while waiting on
response from the lower layers. Returning "EINTR" will never initiate
internal retry.

Fix details: The issue was fixed by replacing "EINTR" with
"ERESTARTSYS" for mid-layer retries.

Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:16:17 -06:00

356 lines
10 KiB
C

/*
* Adaptec AAC series RAID controller driver
* (c) Copyright 2001 Red Hat Inc.
*
* based on the old aacraid driver that is..
* Adaptec aacraid device driver for Linux.
*
* Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Module Name:
* dpcsup.c
*
* Abstract: All DPC processing routines for the cyclone board occur here.
*
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/blkdev.h>
#include <linux/semaphore.h>
#include "aacraid.h"
/**
* aac_response_normal - Handle command replies
* @q: Queue to read from
*
* This DPC routine will be run when the adapter interrupts us to let us
* know there is a response on our normal priority queue. We will pull off
* all QE there are and wake up all the waiters before exiting. We will
* take a spinlock out on the queue before operating on it.
*/
unsigned int aac_response_normal(struct aac_queue * q)
{
struct aac_dev * dev = q->dev;
struct aac_entry *entry;
struct hw_fib * hwfib;
struct fib * fib;
int consumed = 0;
unsigned long flags, mflags;
spin_lock_irqsave(q->lock, flags);
/*
* Keep pulling response QEs off the response queue and waking
* up the waiters until there are no more QEs. We then return
* back to the system. If no response was requesed we just
* deallocate the Fib here and continue.
*/
while(aac_consumer_get(dev, q, &entry))
{
int fast;
u32 index = le32_to_cpu(entry->addr);
fast = index & 0x01;
fib = &dev->fibs[index >> 2];
hwfib = fib->hw_fib_va;
aac_consumer_free(dev, q, HostNormRespQueue);
/*
* Remove this fib from the Outstanding I/O queue.
* But only if it has not already been timed out.
*
* If the fib has been timed out already, then just
* continue. The caller has already been notified that
* the fib timed out.
*/
dev->queues->queue[AdapNormCmdQueue].numpending--;
if (unlikely(fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) {
spin_unlock_irqrestore(q->lock, flags);
aac_fib_complete(fib);
aac_fib_free(fib);
spin_lock_irqsave(q->lock, flags);
continue;
}
spin_unlock_irqrestore(q->lock, flags);
if (fast) {
/*
* Doctor the fib
*/
*(__le32 *)hwfib->data = cpu_to_le32(ST_OK);
hwfib->header.XferState |= cpu_to_le32(AdapterProcessed);
}
FIB_COUNTER_INCREMENT(aac_config.FibRecved);
if (hwfib->header.Command == cpu_to_le16(NuFileSystem))
{
__le32 *pstatus = (__le32 *)hwfib->data;
if (*pstatus & cpu_to_le32(0xffff0000))
*pstatus = cpu_to_le32(ST_OK);
}
if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected | Async))
{
if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected))
FIB_COUNTER_INCREMENT(aac_config.NoResponseRecved);
else
FIB_COUNTER_INCREMENT(aac_config.AsyncRecved);
/*
* NOTE: we cannot touch the fib after this
* call, because it may have been deallocated.
*/
fib->flags = 0;
fib->callback(fib->callback_data, fib);
} else {
unsigned long flagv;
spin_lock_irqsave(&fib->event_lock, flagv);
if (!fib->done) {
fib->done = 1;
up(&fib->event_wait);
}
spin_unlock_irqrestore(&fib->event_lock, flagv);
spin_lock_irqsave(&dev->manage_lock, mflags);
dev->management_fib_count--;
spin_unlock_irqrestore(&dev->manage_lock, mflags);
FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
if (fib->done == 2) {
spin_lock_irqsave(&fib->event_lock, flagv);
fib->done = 0;
spin_unlock_irqrestore(&fib->event_lock, flagv);
aac_fib_complete(fib);
aac_fib_free(fib);
}
}
consumed++;
spin_lock_irqsave(q->lock, flags);
}
if (consumed > aac_config.peak_fibs)
aac_config.peak_fibs = consumed;
if (consumed == 0)
aac_config.zero_fibs++;
spin_unlock_irqrestore(q->lock, flags);
return 0;
}
/**
* aac_command_normal - handle commands
* @q: queue to process
*
* This DPC routine will be queued when the adapter interrupts us to
* let us know there is a command on our normal priority queue. We will
* pull off all QE there are and wake up all the waiters before exiting.
* We will take a spinlock out on the queue before operating on it.
*/
unsigned int aac_command_normal(struct aac_queue *q)
{
struct aac_dev * dev = q->dev;
struct aac_entry *entry;
unsigned long flags;
spin_lock_irqsave(q->lock, flags);
/*
* Keep pulling response QEs off the response queue and waking
* up the waiters until there are no more QEs. We then return
* back to the system.
*/
while(aac_consumer_get(dev, q, &entry))
{
struct fib fibctx;
struct hw_fib * hw_fib;
u32 index;
struct fib *fib = &fibctx;
index = le32_to_cpu(entry->addr) / sizeof(struct hw_fib);
hw_fib = &dev->aif_base_va[index];
/*
* Allocate a FIB at all costs. For non queued stuff
* we can just use the stack so we are happy. We need
* a fib object in order to manage the linked lists
*/
if (dev->aif_thread)
if((fib = kmalloc(sizeof(struct fib), GFP_ATOMIC)) == NULL)
fib = &fibctx;
memset(fib, 0, sizeof(struct fib));
INIT_LIST_HEAD(&fib->fiblink);
fib->type = FSAFS_NTC_FIB_CONTEXT;
fib->size = sizeof(struct fib);
fib->hw_fib_va = hw_fib;
fib->data = hw_fib->data;
fib->dev = dev;
if (dev->aif_thread && fib != &fibctx) {
list_add_tail(&fib->fiblink, &q->cmdq);
aac_consumer_free(dev, q, HostNormCmdQueue);
wake_up_interruptible(&q->cmdready);
} else {
aac_consumer_free(dev, q, HostNormCmdQueue);
spin_unlock_irqrestore(q->lock, flags);
/*
* Set the status of this FIB
*/
*(__le32 *)hw_fib->data = cpu_to_le32(ST_OK);
aac_fib_adapter_complete(fib, sizeof(u32));
spin_lock_irqsave(q->lock, flags);
}
}
spin_unlock_irqrestore(q->lock, flags);
return 0;
}
/**
* aac_intr_normal - Handle command replies
* @dev: Device
* @index: completion reference
*
* This DPC routine will be run when the adapter interrupts us to let us
* know there is a response on our normal priority queue. We will pull off
* all QE there are and wake up all the waiters before exiting.
*/
unsigned int aac_intr_normal(struct aac_dev * dev, u32 index)
{
unsigned long mflags;
dprintk((KERN_INFO "aac_intr_normal(%p,%x)\n", dev, index));
if ((index & 0x00000002L)) {
struct hw_fib * hw_fib;
struct fib * fib;
struct aac_queue *q = &dev->queues->queue[HostNormCmdQueue];
unsigned long flags;
if (index == 0xFFFFFFFEL) /* Special Case */
return 0; /* Do nothing */
/*
* Allocate a FIB. For non queued stuff we can just use
* the stack so we are happy. We need a fib object in order to
* manage the linked lists.
*/
if ((!dev->aif_thread)
|| (!(fib = kzalloc(sizeof(struct fib),GFP_ATOMIC))))
return 1;
if (!(hw_fib = kzalloc(sizeof(struct hw_fib),GFP_ATOMIC))) {
kfree (fib);
return 1;
}
memcpy(hw_fib, (struct hw_fib *)(((uintptr_t)(dev->regs.sa)) +
(index & ~0x00000002L)), sizeof(struct hw_fib));
INIT_LIST_HEAD(&fib->fiblink);
fib->type = FSAFS_NTC_FIB_CONTEXT;
fib->size = sizeof(struct fib);
fib->hw_fib_va = hw_fib;
fib->data = hw_fib->data;
fib->dev = dev;
spin_lock_irqsave(q->lock, flags);
list_add_tail(&fib->fiblink, &q->cmdq);
wake_up_interruptible(&q->cmdready);
spin_unlock_irqrestore(q->lock, flags);
return 1;
} else {
int fast = index & 0x01;
struct fib * fib = &dev->fibs[index >> 2];
struct hw_fib * hwfib = fib->hw_fib_va;
/*
* Remove this fib from the Outstanding I/O queue.
* But only if it has not already been timed out.
*
* If the fib has been timed out already, then just
* continue. The caller has already been notified that
* the fib timed out.
*/
dev->queues->queue[AdapNormCmdQueue].numpending--;
if (unlikely(fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) {
aac_fib_complete(fib);
aac_fib_free(fib);
return 0;
}
if (fast) {
/*
* Doctor the fib
*/
*(__le32 *)hwfib->data = cpu_to_le32(ST_OK);
hwfib->header.XferState |= cpu_to_le32(AdapterProcessed);
}
FIB_COUNTER_INCREMENT(aac_config.FibRecved);
if (hwfib->header.Command == cpu_to_le16(NuFileSystem))
{
__le32 *pstatus = (__le32 *)hwfib->data;
if (*pstatus & cpu_to_le32(0xffff0000))
*pstatus = cpu_to_le32(ST_OK);
}
if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected | Async))
{
if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected))
FIB_COUNTER_INCREMENT(aac_config.NoResponseRecved);
else
FIB_COUNTER_INCREMENT(aac_config.AsyncRecved);
/*
* NOTE: we cannot touch the fib after this
* call, because it may have been deallocated.
*/
fib->flags = 0;
fib->callback(fib->callback_data, fib);
} else {
unsigned long flagv;
dprintk((KERN_INFO "event_wait up\n"));
spin_lock_irqsave(&fib->event_lock, flagv);
if (!fib->done) {
fib->done = 1;
up(&fib->event_wait);
}
spin_unlock_irqrestore(&fib->event_lock, flagv);
spin_lock_irqsave(&dev->manage_lock, mflags);
dev->management_fib_count--;
spin_unlock_irqrestore(&dev->manage_lock, mflags);
FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
if (fib->done == 2) {
spin_lock_irqsave(&fib->event_lock, flagv);
fib->done = 0;
spin_unlock_irqrestore(&fib->event_lock, flagv);
aac_fib_complete(fib);
aac_fib_free(fib);
}
}
return 0;
}
}