linux/arch/v850/kernel/sim85e2.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

202 lines
5.1 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* arch/v850/kernel/sim85e2.c -- Machine-specific stuff for
* V850E2 RTL simulator
*
* Copyright (C) 2002,03 NEC Electronics Corporation
* Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
* archive for more details.
*
* Written by Miles Bader <miles@gnu.org>
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/bootmem.h>
#include <linux/irq.h>
#include <asm/atomic.h>
#include <asm/page.h>
#include <asm/machdep.h>
#include "mach.h"
/* There are 4 possible areas we can use:
IRAM (1MB) is fast for instruction fetches, but slow for data
DRAM (1020KB) is fast for data, but slow for instructions
ERAM is cached, so should be fast for both insns and data
SDRAM is external DRAM, similar to ERAM
*/
#define INIT_MEMC_FOR_SDRAM
#define USE_SDRAM_AREA
#define KERNEL_IN_SDRAM_AREA
#define DCACHE_MODE V850E2_CACHE_BTSC_DCM_WT
/*#define DCACHE_MODE V850E2_CACHE_BTSC_DCM_WB_ALLOC*/
#ifdef USE_SDRAM_AREA
#define RAM_START SDRAM_ADDR
#define RAM_END (SDRAM_ADDR + SDRAM_SIZE)
#else
/* When we use DRAM, we need to account for the fact that the end of it is
used for R0_RAM. */
#define RAM_START DRAM_ADDR
#define RAM_END R0_RAM_ADDR
#endif
extern void memcons_setup (void);
#ifdef KERNEL_IN_SDRAM_AREA
#define EARLY_INIT_SECTION_ATTR __attribute__ ((section (".early.text")))
#else
#define EARLY_INIT_SECTION_ATTR __init
#endif
void EARLY_INIT_SECTION_ATTR mach_early_init (void)
{
/* The sim85e2 simulator tracks `undefined' values, so to make
debugging easier, we begin by zeroing out all otherwise
undefined registers. This is not strictly necessary.
The registers we zero are:
Every GPR except:
stack-pointer (r3)
task-pointer (r16)
our return addr (r31)
Every system register (SPR) that we know about except for
the PSW (SPR 5), which we zero except for the
disable-interrupts bit.
*/
/* GPRs */
asm volatile (" mov r0, r1 ; mov r0, r2 ");
asm volatile ("mov r0, r4 ; mov r0, r5 ; mov r0, r6 ; mov r0, r7 ");
asm volatile ("mov r0, r8 ; mov r0, r9 ; mov r0, r10; mov r0, r11");
asm volatile ("mov r0, r12; mov r0, r13; mov r0, r14; mov r0, r15");
asm volatile (" mov r0, r17; mov r0, r18; mov r0, r19");
asm volatile ("mov r0, r20; mov r0, r21; mov r0, r22; mov r0, r23");
asm volatile ("mov r0, r24; mov r0, r25; mov r0, r26; mov r0, r27");
asm volatile ("mov r0, r28; mov r0, r29; mov r0, r30");
/* SPRs */
asm volatile ("ldsr r0, 0; ldsr r0, 1; ldsr r0, 2; ldsr r0, 3");
asm volatile ("ldsr r0, 4");
asm volatile ("addi 0x20, r0, r1; ldsr r1, 5"); /* PSW */
asm volatile ("ldsr r0, 16; ldsr r0, 17; ldsr r0, 18; ldsr r0, 19");
asm volatile ("ldsr r0, 20");
#ifdef INIT_MEMC_FOR_SDRAM
/* Settings for SDRAM controller. */
V850E2_VSWC = 0x0042;
V850E2_BSC = 0x9286;
V850E2_BCT(0) = 0xb000; /* was: 0 */
V850E2_BCT(1) = 0x000b;
V850E2_ASC = 0;
V850E2_LBS = 0xa9aa; /* was: 0xaaaa */
V850E2_LBC(0) = 0;
V850E2_LBC(1) = 0; /* was: 0x3 */
V850E2_BCC = 0;
V850E2_RFS(4) = 0x800a; /* was: 0xf109 */
V850E2_SCR(4) = 0x2091; /* was: 0x20a1 */
V850E2_RFS(3) = 0x800c;
V850E2_SCR(3) = 0x20a1;
V850E2_DWC(0) = 0;
V850E2_DWC(1) = 0;
#endif
#if 0
#ifdef CONFIG_V850E2_SIM85E2S
/* Turn on the caches. */
V850E2_CACHE_BTSC = V850E2_CACHE_BTSC_ICM | DCACHE_MODE;
V850E2_BHC = 0x1010;
#elif CONFIG_V850E2_SIM85E2C
V850E2_CACHE_BTSC |= (V850E2_CACHE_BTSC_ICM | V850E2_CACHE_BTSC_DCM0);
V850E2_BUSM_BHC = 0xFFFF;
#endif
#else
V850E2_BHC = 0;
#endif
/* Don't stop the simulator at `halt' instructions. */
SIM85E2_NOTHAL = 1;
/* Ensure that the simulator halts on a panic, instead of going
into an infinite loop inside the panic function. */
panic_timeout = -1;
}
void __init mach_setup (char **cmdline)
{
memcons_setup ();
}
void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
{
*ram_start = RAM_START;
*ram_len = RAM_END - RAM_START;
}
void __init mach_sched_init (struct irqaction *timer_action)
{
/* The simulator actually cycles through all interrupts
periodically. We just pay attention to IRQ0, which gives us
1/64 the rate of the periodic interrupts. */
setup_irq (0, timer_action);
}
void mach_gettimeofday (struct timespec *tv)
{
tv->tv_sec = 0;
tv->tv_nsec = 0;
}
/* Interrupts */
struct v850e_intc_irq_init irq_inits[] = {
{ "IRQ", 0, NUM_MACH_IRQS, 1, 7 },
{ 0 }
};
struct hw_interrupt_type hw_itypes[1];
/* Initialize interrupts. */
void __init mach_init_irqs (void)
{
v850e_intc_init_irq_types (irq_inits, hw_itypes);
}
void machine_halt (void) __attribute__ ((noreturn));
void machine_halt (void)
{
SIM85E2_SIMFIN = 0; /* Halt immediately. */
for (;;) {}
}
EXPORT_SYMBOL(machine_halt);
void machine_restart (char *__unused)
{
machine_halt ();
}
EXPORT_SYMBOL(machine_restart);
void machine_power_off (void)
{
machine_halt ();
}
EXPORT_SYMBOL(machine_power_off);