linux/drivers/staging
Greg Kroah-Hartman eafe5cfe71 First round of IIO fixes for the 4.8 cycle.
This is somewhat of a bumper set due to my unavailabilty earlier in the
 month.  The only slightly unusual ones are the dts updates for the
 rockchip adc reset.  The fix in the driver only makes sense with these
 and the rockchip maintainer is happy with them going through IIO to
 reach mainline.
 
 Core stuff
 
 * Fix an issue with a blocking op when !TASK_RUNNING. This been there
   a while and snuck in with seemingly minor additions to some core
   code paths.
 * Tools
   - generic_buffer failed to initialize the channel array pointer thus
     in the case of no channels blows up trying to free a random memory
     address.
 * sw-trigger:
   - Fix config group initialization when configfs is built as a module.
 
 Drivers
 
 * ad5933
   - Fix an incorrect overwrite of an error value.
 * ad799x
   - A missed assignment of the update_scan_mode callback means buffered mode
     doesn't work on the ad7991, ad7995 or ad7999.
 * ads1015
   - wrong pointer returned from i2c_get_clientdata (missmatch of assumptions)
 * am2315
   - Timestamps are reported, but never actually acquired from anywhere
     (so always 0)
   - missing buffer selects in Kconfig
 * am335x adc
   - Protect fifo1 from concurrent access.
   - Increase timeout waiting for ADC to be long enough in all cases.
 * as3935
   - Timestamps are reported, but never actually acquired from anywhere
     (so always 0)
 * at91
   - Fix reading of channel 3.
 * atlas-ph-sensor
   - Typo means that the scale of electrical conductivity readings is way off.
 * bma220
   - Timestamps are reported, but never actually acquired from anywhere
     (so always 0)
   - Missing buffer selects in Kconfig
 * bmp280
   - pass the write pointer to PTR_ERR (i.e. the one that was just checked
     with IS_ERR).
   - suspend /resume crash due to wrong assumption about what dev_get_drvdata
     would return.
 * hdc100x
   - It superficially appeared that smbus_read_byte commands would allow
   reading of the outputs in two goes.  In reality it doesn't work, but
   instead returns the same for the upper and lower bytes (nice catch from
   Alison!)
 * kxsd9
   - Fix raw read return value to ensure it actually reports the value rather
   than a blank string.
 * max44000
   - Missing buffer selects in Kconfig
 * rockchip_saradc
   - Add use of reset controller to enforce a clean state of the ADC.
     Some bootloaders can leave it in an 'intersting' state and effectively
     frozen without this. A couple of associated dts updates.
 * stk8ba50
   - Missing buffer selects in Kconfig
 * stx104
   - Fix a possible race due to use of devm_iio_device_register when there
     was other stuff in the remove function.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIuBAABCAAYBQJXvJbQERxqaWMyM0BrZXJuZWwub3JnAAoJEFSFNJnE9BaIgQoP
 /05c7WzyhRxobrQGMIJShTA5/SMwrZa8Lc9z5rbjc7WEB0oPk+gw53ajWoEJYrj0
 oC5V2iYWhqsQOQ52OgD7jng85Z1LOXW2gWZW/rd4H27iCpBJqDQNjdOo8tbFjfDe
 oOVyhXvqmq8TPddAjX1gWJS9QC46rMAbTQpKtyJ75acttsRS+Hmn12ZdTiz6SDjm
 SGKgZM9RvhBephb33u75S4u8kkcsv3M+1dAOz4Uf1lSzTZq2wBdSoePwaPCb35sL
 9fbo8qTGUUa85rkwWmnGqnds0/v6ZNW0rcLaChb5YE8eQBQ+JCNDDF+p9HqQestj
 gzBHKOGampc/feNY4kB/aClzq/9fmS+eYPGUOiCM5Lv5Ck9lko/kUbequJbXgOoS
 87/BOTytNMmd5K4Sagm92vOl0piXSZAzhxiq2njaipIeqo0nfdNSrpWn91pEKWag
 sjcoPKhHukxXXJutaWRXNey1pGGJjflkFC9T6RJUVBS4/IuBvRCTQGvxVidzsgrT
 2bZ3ZIzz/nFjQ0dub+YEtN2t+tESKZDBuFgyYefULIpUKTmoSgrq0R8Pa8XZLNxq
 BpHbHQuJjL/hcFz6h8wgv16IFhjK3qT71VcGF78XQDyQhHXdwHAr/ioZ5M6kIgU4
 tRzBe0+wQsVqAr0cryptlWXsMskDzC9prRf5viYYiNuu
 =Hra7
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-linus

Jonathan writes:

First round of IIO fixes for the 4.8 cycle.

This is somewhat of a bumper set due to my unavailabilty earlier in the
month.  The only slightly unusual ones are the dts updates for the
rockchip adc reset.  The fix in the driver only makes sense with these
and the rockchip maintainer is happy with them going through IIO to
reach mainline.

Core stuff

* Fix an issue with a blocking op when !TASK_RUNNING. This been there
  a while and snuck in with seemingly minor additions to some core
  code paths.
* Tools
  - generic_buffer failed to initialize the channel array pointer thus
    in the case of no channels blows up trying to free a random memory
    address.
* sw-trigger:
  - Fix config group initialization when configfs is built as a module.

Drivers

* ad5933
  - Fix an incorrect overwrite of an error value.
* ad799x
  - A missed assignment of the update_scan_mode callback means buffered mode
    doesn't work on the ad7991, ad7995 or ad7999.
* ads1015
  - wrong pointer returned from i2c_get_clientdata (missmatch of assumptions)
* am2315
  - Timestamps are reported, but never actually acquired from anywhere
    (so always 0)
  - missing buffer selects in Kconfig
* am335x adc
  - Protect fifo1 from concurrent access.
  - Increase timeout waiting for ADC to be long enough in all cases.
* as3935
  - Timestamps are reported, but never actually acquired from anywhere
    (so always 0)
* at91
  - Fix reading of channel 3.
* atlas-ph-sensor
  - Typo means that the scale of electrical conductivity readings is way off.
* bma220
  - Timestamps are reported, but never actually acquired from anywhere
    (so always 0)
  - Missing buffer selects in Kconfig
* bmp280
  - pass the write pointer to PTR_ERR (i.e. the one that was just checked
    with IS_ERR).
  - suspend /resume crash due to wrong assumption about what dev_get_drvdata
    would return.
* hdc100x
  - It superficially appeared that smbus_read_byte commands would allow
  reading of the outputs in two goes.  In reality it doesn't work, but
  instead returns the same for the upper and lower bytes (nice catch from
  Alison!)
* kxsd9
  - Fix raw read return value to ensure it actually reports the value rather
  than a blank string.
* max44000
  - Missing buffer selects in Kconfig
* rockchip_saradc
  - Add use of reset controller to enforce a clean state of the ADC.
    Some bootloaders can leave it in an 'intersting' state and effectively
    frozen without this. A couple of associated dts updates.
* stk8ba50
  - Missing buffer selects in Kconfig
* stx104
  - Fix a possible race due to use of devm_iio_device_register when there
    was other stuff in the remove function.
2016-08-23 17:39:31 -04:00
..
android Merge tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux 2016-08-01 21:44:08 -04:00
board
clocking-wizard
comedi staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility 2016-08-21 17:07:19 +02:00
dgnc
emxx_udc staging: emxx_udc: allow modular build 2016-07-26 08:47:08 -07:00
fbtft
fsl-mc staging: fsl-mc: convert mc command build/parse to use C structs 2016-06-26 17:14:03 -07:00
fwserial
gdm724x
goldfish
gs_fpgaboot
i4l
iio staging: iio: ad5933: Return correct value for AD5933_OUT_RANGE. 2016-08-15 15:39:04 +01:00
ks7010 staging: ks7010: remove bogus NULL checks 2016-06-18 19:47:00 -07:00
lustre staging/lustre/llite: Close atomic_open race with several openers 2016-08-15 18:25:10 +02:00
media [media] cec: fix off-by-one memset 2016-07-28 20:16:35 -03:00
most
mt29f_spinand
netlogic
nvec
octeon
octeon-usb
olpc_dcon
rtl8188eu
rtl8192e
rtl8192u rtl8192u: Remove unused semaphore rf_sem 2016-06-18 19:50:48 -07:00
rtl8712
rtl8723au nl80211: support beacon report scanning 2016-07-06 14:51:31 +02:00
rts5208
skein
slicoss
sm750fb
speakup
unisys
vme
vt6655
vt6656
wilc1000 staging: wilc1000: correctly check if associatedsta has not been found 2016-08-21 17:28:21 +02:00
wlan-ng nl80211: support beacon report scanning 2016-07-06 14:51:31 +02:00
xgifb
Kconfig
Makefile