mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
866a138917
Add support for TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor. Additionally to temperature and magnetic X, Y and Z-axes the angle and magnitude are reported. The sensor is operating in continuous measurement mode and changes to sleep mode if not used for 5 seconds. Datasheet: https://www.ti.com/lit/gpn/tmag5273 Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221201072220.402585-4-gerald.loacker@wolfvision.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
743 lines
20 KiB
C
743 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Driver for the TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor
|
|
*
|
|
* Copyright (C) 2022 WolfVision GmbH
|
|
*
|
|
* Author: Gerald Loacker <gerald.loacker@wolfvision.net>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bits.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#define TMAG5273_DEVICE_CONFIG_1 0x00
|
|
#define TMAG5273_DEVICE_CONFIG_2 0x01
|
|
#define TMAG5273_SENSOR_CONFIG_1 0x02
|
|
#define TMAG5273_SENSOR_CONFIG_2 0x03
|
|
#define TMAG5273_X_THR_CONFIG 0x04
|
|
#define TMAG5273_Y_THR_CONFIG 0x05
|
|
#define TMAG5273_Z_THR_CONFIG 0x06
|
|
#define TMAG5273_T_CONFIG 0x07
|
|
#define TMAG5273_INT_CONFIG_1 0x08
|
|
#define TMAG5273_MAG_GAIN_CONFIG 0x09
|
|
#define TMAG5273_MAG_OFFSET_CONFIG_1 0x0A
|
|
#define TMAG5273_MAG_OFFSET_CONFIG_2 0x0B
|
|
#define TMAG5273_I2C_ADDRESS 0x0C
|
|
#define TMAG5273_DEVICE_ID 0x0D
|
|
#define TMAG5273_MANUFACTURER_ID_LSB 0x0E
|
|
#define TMAG5273_MANUFACTURER_ID_MSB 0x0F
|
|
#define TMAG5273_T_MSB_RESULT 0x10
|
|
#define TMAG5273_T_LSB_RESULT 0x11
|
|
#define TMAG5273_X_MSB_RESULT 0x12
|
|
#define TMAG5273_X_LSB_RESULT 0x13
|
|
#define TMAG5273_Y_MSB_RESULT 0x14
|
|
#define TMAG5273_Y_LSB_RESULT 0x15
|
|
#define TMAG5273_Z_MSB_RESULT 0x16
|
|
#define TMAG5273_Z_LSB_RESULT 0x17
|
|
#define TMAG5273_CONV_STATUS 0x18
|
|
#define TMAG5273_ANGLE_RESULT_MSB 0x19
|
|
#define TMAG5273_ANGLE_RESULT_LSB 0x1A
|
|
#define TMAG5273_MAGNITUDE_RESULT 0x1B
|
|
#define TMAG5273_DEVICE_STATUS 0x1C
|
|
#define TMAG5273_MAX_REG TMAG5273_DEVICE_STATUS
|
|
|
|
#define TMAG5273_AUTOSLEEP_DELAY_MS 5000
|
|
#define TMAG5273_MAX_AVERAGE 32
|
|
|
|
/*
|
|
* bits in the TMAG5273_MANUFACTURER_ID_LSB / MSB register
|
|
* 16-bit unique manufacturer ID 0x49 / 0x54 = "TI"
|
|
*/
|
|
#define TMAG5273_MANUFACTURER_ID 0x5449
|
|
|
|
/* bits in the TMAG5273_DEVICE_CONFIG_1 register */
|
|
#define TMAG5273_AVG_MODE_MASK GENMASK(4, 2)
|
|
#define TMAG5273_AVG_1_MODE FIELD_PREP(TMAG5273_AVG_MODE_MASK, 0)
|
|
#define TMAG5273_AVG_2_MODE FIELD_PREP(TMAG5273_AVG_MODE_MASK, 1)
|
|
#define TMAG5273_AVG_4_MODE FIELD_PREP(TMAG5273_AVG_MODE_MASK, 2)
|
|
#define TMAG5273_AVG_8_MODE FIELD_PREP(TMAG5273_AVG_MODE_MASK, 3)
|
|
#define TMAG5273_AVG_16_MODE FIELD_PREP(TMAG5273_AVG_MODE_MASK, 4)
|
|
#define TMAG5273_AVG_32_MODE FIELD_PREP(TMAG5273_AVG_MODE_MASK, 5)
|
|
|
|
/* bits in the TMAG5273_DEVICE_CONFIG_2 register */
|
|
#define TMAG5273_OP_MODE_MASK GENMASK(1, 0)
|
|
#define TMAG5273_OP_MODE_STANDBY FIELD_PREP(TMAG5273_OP_MODE_MASK, 0)
|
|
#define TMAG5273_OP_MODE_SLEEP FIELD_PREP(TMAG5273_OP_MODE_MASK, 1)
|
|
#define TMAG5273_OP_MODE_CONT FIELD_PREP(TMAG5273_OP_MODE_MASK, 2)
|
|
#define TMAG5273_OP_MODE_WAKEUP FIELD_PREP(TMAG5273_OP_MODE_MASK, 3)
|
|
|
|
/* bits in the TMAG5273_SENSOR_CONFIG_1 register */
|
|
#define TMAG5273_MAG_CH_EN_MASK GENMASK(7, 4)
|
|
#define TMAG5273_MAG_CH_EN_X_Y_Z 7
|
|
|
|
/* bits in the TMAG5273_SENSOR_CONFIG_2 register */
|
|
#define TMAG5273_Z_RANGE_MASK BIT(0)
|
|
#define TMAG5273_X_Y_RANGE_MASK BIT(1)
|
|
#define TMAG5273_ANGLE_EN_MASK GENMASK(3, 2)
|
|
#define TMAG5273_ANGLE_EN_OFF 0
|
|
#define TMAG5273_ANGLE_EN_X_Y 1
|
|
#define TMAG5273_ANGLE_EN_Y_Z 2
|
|
#define TMAG5273_ANGLE_EN_X_Z 3
|
|
|
|
/* bits in the TMAG5273_T_CONFIG register */
|
|
#define TMAG5273_T_CH_EN BIT(0)
|
|
|
|
/* bits in the TMAG5273_DEVICE_ID register */
|
|
#define TMAG5273_VERSION_MASK GENMASK(1, 0)
|
|
|
|
/* bits in the TMAG5273_CONV_STATUS register */
|
|
#define TMAG5273_CONV_STATUS_COMPLETE BIT(0)
|
|
|
|
enum tmag5273_channels {
|
|
TEMPERATURE = 0,
|
|
AXIS_X,
|
|
AXIS_Y,
|
|
AXIS_Z,
|
|
ANGLE,
|
|
MAGNITUDE,
|
|
};
|
|
|
|
enum tmag5273_scale_index {
|
|
MAGN_RANGE_LOW = 0,
|
|
MAGN_RANGE_HIGH,
|
|
MAGN_RANGE_NUM
|
|
};
|
|
|
|
/* state container for the TMAG5273 driver */
|
|
struct tmag5273_data {
|
|
struct device *dev;
|
|
unsigned int devid;
|
|
unsigned int version;
|
|
char name[16];
|
|
unsigned int conv_avg;
|
|
unsigned int scale;
|
|
enum tmag5273_scale_index scale_index;
|
|
unsigned int angle_measurement;
|
|
struct regmap *map;
|
|
struct regulator *vcc;
|
|
|
|
/*
|
|
* Locks the sensor for exclusive use during a measurement (which
|
|
* involves several register transactions so the regmap lock is not
|
|
* enough) so that measurements get serialized in a
|
|
* first-come-first-serve manner.
|
|
*/
|
|
struct mutex lock;
|
|
};
|
|
|
|
static const char *const tmag5273_angle_names[] = { "off", "x-y", "y-z", "x-z" };
|
|
|
|
/*
|
|
* Averaging enables additional sampling of the sensor data to reduce the noise
|
|
* effect, but also increases conversion time.
|
|
*/
|
|
static const unsigned int tmag5273_avg_table[] = {
|
|
1, 2, 4, 8, 16, 32,
|
|
};
|
|
|
|
/*
|
|
* Magnetic resolution in Gauss for different TMAG5273 versions.
|
|
* Scale[Gauss] = Range[mT] * 1000 / 2^15 * 10, (1 mT = 10 Gauss)
|
|
* Only version 1 and 2 are valid, version 0 and 3 are reserved.
|
|
*/
|
|
static const struct iio_val_int_plus_micro tmag5273_scale[][MAGN_RANGE_NUM] = {
|
|
{ { 0, 0 }, { 0, 0 } },
|
|
{ { 0, 12200 }, { 0, 24400 } },
|
|
{ { 0, 40600 }, { 0, 81200 } },
|
|
{ { 0, 0 }, { 0, 0 } },
|
|
};
|
|
|
|
static int tmag5273_get_measure(struct tmag5273_data *data, s16 *t, s16 *x,
|
|
s16 *y, s16 *z, u16 *angle, u16 *magnitude)
|
|
{
|
|
unsigned int status, val;
|
|
__be16 reg_data[4];
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
/*
|
|
* Max. conversion time is 2425 us in 32x averaging mode for all three
|
|
* channels. Since we are in continuous measurement mode, a measurement
|
|
* may already be there, so poll for completed measurement with
|
|
* timeout.
|
|
*/
|
|
ret = regmap_read_poll_timeout(data->map, TMAG5273_CONV_STATUS, status,
|
|
status & TMAG5273_CONV_STATUS_COMPLETE,
|
|
100, 10000);
|
|
if (ret) {
|
|
dev_err(data->dev, "timeout waiting for measurement\n");
|
|
goto out_unlock;
|
|
}
|
|
|
|
ret = regmap_bulk_read(data->map, TMAG5273_T_MSB_RESULT, reg_data,
|
|
sizeof(reg_data));
|
|
if (ret)
|
|
goto out_unlock;
|
|
*t = be16_to_cpu(reg_data[0]);
|
|
*x = be16_to_cpu(reg_data[1]);
|
|
*y = be16_to_cpu(reg_data[2]);
|
|
*z = be16_to_cpu(reg_data[3]);
|
|
|
|
ret = regmap_bulk_read(data->map, TMAG5273_ANGLE_RESULT_MSB,
|
|
®_data[0], sizeof(reg_data[0]));
|
|
if (ret)
|
|
goto out_unlock;
|
|
/*
|
|
* angle has 9 bits integer value and 4 bits fractional part
|
|
* 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
|
|
* 0 0 0 a a a a a a a a a f f f f
|
|
*/
|
|
*angle = be16_to_cpu(reg_data[0]);
|
|
|
|
ret = regmap_read(data->map, TMAG5273_MAGNITUDE_RESULT, &val);
|
|
if (ret < 0)
|
|
goto out_unlock;
|
|
*magnitude = val;
|
|
|
|
out_unlock:
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int tmag5273_write_osr(struct tmag5273_data *data, int val)
|
|
{
|
|
int i;
|
|
|
|
if (val == data->conv_avg)
|
|
return 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(tmag5273_avg_table); i++) {
|
|
if (tmag5273_avg_table[i] == val)
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(tmag5273_avg_table))
|
|
return -EINVAL;
|
|
data->conv_avg = val;
|
|
|
|
return regmap_update_bits(data->map, TMAG5273_DEVICE_CONFIG_1,
|
|
TMAG5273_AVG_MODE_MASK,
|
|
FIELD_PREP(TMAG5273_AVG_MODE_MASK, i));
|
|
}
|
|
|
|
static int tmag5273_write_scale(struct tmag5273_data *data, int scale_micro)
|
|
{
|
|
u32 value;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(tmag5273_scale[0]); i++) {
|
|
if (tmag5273_scale[data->version][i].micro == scale_micro)
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(tmag5273_scale[0]))
|
|
return -EINVAL;
|
|
data->scale_index = i;
|
|
|
|
if (data->scale_index == MAGN_RANGE_LOW)
|
|
value = 0;
|
|
else
|
|
value = TMAG5273_Z_RANGE_MASK | TMAG5273_X_Y_RANGE_MASK;
|
|
|
|
return regmap_update_bits(data->map, TMAG5273_SENSOR_CONFIG_2,
|
|
TMAG5273_Z_RANGE_MASK | TMAG5273_X_Y_RANGE_MASK, value);
|
|
}
|
|
|
|
static int tmag5273_read_avail(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
const int **vals, int *type, int *length,
|
|
long mask)
|
|
{
|
|
struct tmag5273_data *data = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
|
|
*vals = tmag5273_avg_table;
|
|
*type = IIO_VAL_INT;
|
|
*length = ARRAY_SIZE(tmag5273_avg_table);
|
|
return IIO_AVAIL_LIST;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_MAGN:
|
|
*type = IIO_VAL_INT_PLUS_MICRO;
|
|
*vals = (int *)tmag5273_scale[data->version];
|
|
*length = ARRAY_SIZE(tmag5273_scale[data->version]) *
|
|
MAGN_RANGE_NUM;
|
|
return IIO_AVAIL_LIST;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int tmag5273_read_raw(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
struct tmag5273_data *data = iio_priv(indio_dev);
|
|
s16 t, x, y, z;
|
|
u16 angle, magnitude;
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_PROCESSED:
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = pm_runtime_resume_and_get(data->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = tmag5273_get_measure(data, &t, &x, &y, &z, &angle, &magnitude);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_mark_last_busy(data->dev);
|
|
pm_runtime_put_autosuspend(data->dev);
|
|
|
|
switch (chan->address) {
|
|
case TEMPERATURE:
|
|
*val = t;
|
|
return IIO_VAL_INT;
|
|
case AXIS_X:
|
|
*val = x;
|
|
return IIO_VAL_INT;
|
|
case AXIS_Y:
|
|
*val = y;
|
|
return IIO_VAL_INT;
|
|
case AXIS_Z:
|
|
*val = z;
|
|
return IIO_VAL_INT;
|
|
case ANGLE:
|
|
*val = angle;
|
|
return IIO_VAL_INT;
|
|
case MAGNITUDE:
|
|
*val = magnitude;
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_TEMP:
|
|
/*
|
|
* Convert device specific value to millicelsius.
|
|
* Resolution from the sensor is 60.1 LSB/celsius and
|
|
* the reference value at 25 celsius is 17508 LSBs.
|
|
*/
|
|
*val = 10000;
|
|
*val2 = 601;
|
|
return IIO_VAL_FRACTIONAL;
|
|
case IIO_MAGN:
|
|
/* Magnetic resolution in uT */
|
|
*val = 0;
|
|
*val2 = tmag5273_scale[data->version]
|
|
[data->scale_index].micro;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_ANGL:
|
|
/*
|
|
* Angle is in degrees and has four fractional bits,
|
|
* therefore use 1/16 * pi/180 to convert to radians.
|
|
*/
|
|
*val = 1000;
|
|
*val2 = 916732;
|
|
return IIO_VAL_FRACTIONAL;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
switch (chan->type) {
|
|
case IIO_TEMP:
|
|
*val = -266314;
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
|
|
*val = data->conv_avg;
|
|
return IIO_VAL_INT;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int tmag5273_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int val,
|
|
int val2, long mask)
|
|
{
|
|
struct tmag5273_data *data = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
|
|
return tmag5273_write_osr(data, val);
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_MAGN:
|
|
if (val)
|
|
return -EINVAL;
|
|
return tmag5273_write_scale(data, val2);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
#define TMAG5273_AXIS_CHANNEL(axis, index) \
|
|
{ \
|
|
.type = IIO_MAGN, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
|
BIT(IIO_CHAN_INFO_SCALE), \
|
|
.info_mask_shared_by_type_available = \
|
|
BIT(IIO_CHAN_INFO_SCALE), \
|
|
.info_mask_shared_by_all = \
|
|
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
|
|
.info_mask_shared_by_all_available = \
|
|
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
|
|
.address = index, \
|
|
.scan_index = index, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = 16, \
|
|
.storagebits = 16, \
|
|
.endianness = IIO_CPU, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec tmag5273_channels[] = {
|
|
{
|
|
.type = IIO_TEMP,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_OFFSET),
|
|
.address = TEMPERATURE,
|
|
.scan_index = TEMPERATURE,
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = 16,
|
|
.storagebits = 16,
|
|
.endianness = IIO_CPU,
|
|
},
|
|
},
|
|
TMAG5273_AXIS_CHANNEL(X, AXIS_X),
|
|
TMAG5273_AXIS_CHANNEL(Y, AXIS_Y),
|
|
TMAG5273_AXIS_CHANNEL(Z, AXIS_Z),
|
|
{
|
|
.type = IIO_ANGL,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
|
|
.info_mask_shared_by_all =
|
|
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
|
|
.info_mask_shared_by_all_available =
|
|
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
|
|
.address = ANGLE,
|
|
.scan_index = ANGLE,
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = 16,
|
|
.storagebits = 16,
|
|
.endianness = IIO_CPU,
|
|
},
|
|
},
|
|
{
|
|
.type = IIO_DISTANCE,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.info_mask_shared_by_all =
|
|
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
|
|
.info_mask_shared_by_all_available =
|
|
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
|
|
.address = MAGNITUDE,
|
|
.scan_index = MAGNITUDE,
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = 16,
|
|
.storagebits = 16,
|
|
.endianness = IIO_CPU,
|
|
},
|
|
},
|
|
IIO_CHAN_SOFT_TIMESTAMP(6),
|
|
};
|
|
|
|
static const struct iio_info tmag5273_info = {
|
|
.read_avail = tmag5273_read_avail,
|
|
.read_raw = tmag5273_read_raw,
|
|
.write_raw = tmag5273_write_raw,
|
|
};
|
|
|
|
static bool tmag5273_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return reg >= TMAG5273_T_MSB_RESULT && reg <= TMAG5273_MAGNITUDE_RESULT;
|
|
}
|
|
|
|
static const struct regmap_config tmag5273_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = TMAG5273_MAX_REG,
|
|
.volatile_reg = tmag5273_volatile_reg,
|
|
};
|
|
|
|
static int tmag5273_set_operating_mode(struct tmag5273_data *data,
|
|
unsigned int val)
|
|
{
|
|
return regmap_write(data->map, TMAG5273_DEVICE_CONFIG_2, val);
|
|
}
|
|
|
|
static void tmag5273_read_device_property(struct tmag5273_data *data)
|
|
{
|
|
struct device *dev = data->dev;
|
|
const char *str;
|
|
int ret;
|
|
|
|
data->angle_measurement = TMAG5273_ANGLE_EN_X_Y;
|
|
|
|
ret = device_property_read_string(dev, "ti,angle-measurement", &str);
|
|
if (ret)
|
|
return;
|
|
|
|
ret = match_string(tmag5273_angle_names,
|
|
ARRAY_SIZE(tmag5273_angle_names), str);
|
|
if (ret >= 0)
|
|
data->angle_measurement = ret;
|
|
}
|
|
|
|
static void tmag5273_wake_up(struct tmag5273_data *data)
|
|
{
|
|
int val;
|
|
|
|
/* Wake up the chip by sending a dummy I2C command */
|
|
regmap_read(data->map, TMAG5273_DEVICE_ID, &val);
|
|
/*
|
|
* Time to go to stand-by mode from sleep mode is 50us
|
|
* typically, during this time no I2C access is possible.
|
|
*/
|
|
usleep_range(80, 200);
|
|
}
|
|
|
|
static int tmag5273_chip_init(struct tmag5273_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(data->map, TMAG5273_DEVICE_CONFIG_1,
|
|
TMAG5273_AVG_32_MODE);
|
|
if (ret)
|
|
return ret;
|
|
data->conv_avg = 32;
|
|
|
|
ret = regmap_write(data->map, TMAG5273_DEVICE_CONFIG_2,
|
|
TMAG5273_OP_MODE_CONT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(data->map, TMAG5273_SENSOR_CONFIG_1,
|
|
FIELD_PREP(TMAG5273_MAG_CH_EN_MASK,
|
|
TMAG5273_MAG_CH_EN_X_Y_Z));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(data->map, TMAG5273_SENSOR_CONFIG_2,
|
|
FIELD_PREP(TMAG5273_ANGLE_EN_MASK,
|
|
data->angle_measurement));
|
|
if (ret)
|
|
return ret;
|
|
data->scale_index = MAGN_RANGE_LOW;
|
|
|
|
return regmap_write(data->map, TMAG5273_T_CONFIG, TMAG5273_T_CH_EN);
|
|
}
|
|
|
|
static int tmag5273_check_device_id(struct tmag5273_data *data)
|
|
{
|
|
__le16 devid;
|
|
int val, ret;
|
|
|
|
ret = regmap_read(data->map, TMAG5273_DEVICE_ID, &val);
|
|
if (ret)
|
|
return dev_err_probe(data->dev, ret, "failed to power on device\n");
|
|
data->version = FIELD_PREP(TMAG5273_VERSION_MASK, val);
|
|
|
|
ret = regmap_bulk_read(data->map, TMAG5273_MANUFACTURER_ID_LSB, &devid,
|
|
sizeof(devid));
|
|
if (ret)
|
|
return dev_err_probe(data->dev, ret, "failed to read device ID\n");
|
|
data->devid = le16_to_cpu(devid);
|
|
|
|
switch (data->devid) {
|
|
case TMAG5273_MANUFACTURER_ID:
|
|
/*
|
|
* The device name matches the orderable part number. 'x' stands
|
|
* for A, B, C or D devices, which have different I2C addresses.
|
|
* Versions 1 or 2 (0 and 3 is reserved) stands for different
|
|
* magnetic strengths.
|
|
*/
|
|
snprintf(data->name, sizeof(data->name), "tmag5273x%1u", data->version);
|
|
if (data->version < 1 || data->version > 2)
|
|
dev_warn(data->dev, "Unsupported device %s\n", data->name);
|
|
return 0;
|
|
default:
|
|
/*
|
|
* Only print warning in case of unknown device ID to allow
|
|
* fallback compatible in device tree.
|
|
*/
|
|
dev_warn(data->dev, "Unknown device ID 0x%x\n", data->devid);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void tmag5273_power_down(void *data)
|
|
{
|
|
tmag5273_set_operating_mode(data, TMAG5273_OP_MODE_SLEEP);
|
|
}
|
|
|
|
static int tmag5273_probe(struct i2c_client *i2c)
|
|
{
|
|
struct device *dev = &i2c->dev;
|
|
struct tmag5273_data *data;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
data->dev = dev;
|
|
i2c_set_clientdata(i2c, indio_dev);
|
|
|
|
data->map = devm_regmap_init_i2c(i2c, &tmag5273_regmap_config);
|
|
if (IS_ERR(data->map))
|
|
return dev_err_probe(dev, PTR_ERR(data->map),
|
|
"failed to allocate register map\n");
|
|
|
|
mutex_init(&data->lock);
|
|
|
|
ret = devm_regulator_get_enable(dev, "vcc");
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "failed to enable regulator\n");
|
|
|
|
tmag5273_wake_up(data);
|
|
|
|
ret = tmag5273_check_device_id(data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tmag5273_set_operating_mode(data, TMAG5273_OP_MODE_CONT);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "failed to power on device\n");
|
|
|
|
/*
|
|
* Register powerdown deferred callback which suspends the chip
|
|
* after module unloaded.
|
|
*
|
|
* TMAG5273 should be in SUSPEND mode in the two cases:
|
|
* 1) When driver is loaded, but we do not have any data or
|
|
* configuration requests to it (we are solving it using
|
|
* autosuspend feature).
|
|
* 2) When driver is unloaded and device is not used (devm action is
|
|
* used in this case).
|
|
*/
|
|
ret = devm_add_action_or_reset(dev, tmag5273_power_down, data);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "failed to add powerdown action\n");
|
|
|
|
ret = pm_runtime_set_active(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = devm_pm_runtime_enable(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_get_noresume(dev);
|
|
pm_runtime_set_autosuspend_delay(dev, TMAG5273_AUTOSLEEP_DELAY_MS);
|
|
pm_runtime_use_autosuspend(dev);
|
|
|
|
tmag5273_read_device_property(data);
|
|
|
|
ret = tmag5273_chip_init(data);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "failed to init device\n");
|
|
|
|
indio_dev->info = &tmag5273_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->name = data->name;
|
|
indio_dev->channels = tmag5273_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(tmag5273_channels);
|
|
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_put_autosuspend(dev);
|
|
|
|
ret = devm_iio_device_register(dev, indio_dev);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "device register failed\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tmag5273_runtime_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct tmag5273_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = tmag5273_set_operating_mode(data, TMAG5273_OP_MODE_SLEEP);
|
|
if (ret)
|
|
dev_err(dev, "failed to power off device (%pe)\n", ERR_PTR(ret));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tmag5273_runtime_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct tmag5273_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
tmag5273_wake_up(data);
|
|
|
|
ret = tmag5273_set_operating_mode(data, TMAG5273_OP_MODE_CONT);
|
|
if (ret)
|
|
dev_err(dev, "failed to power on device (%pe)\n", ERR_PTR(ret));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static DEFINE_RUNTIME_DEV_PM_OPS(tmag5273_pm_ops,
|
|
tmag5273_runtime_suspend, tmag5273_runtime_resume,
|
|
NULL);
|
|
|
|
static const struct i2c_device_id tmag5273_id[] = {
|
|
{ "tmag5273" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tmag5273_id);
|
|
|
|
static const struct of_device_id tmag5273_of_match[] = {
|
|
{ .compatible = "ti,tmag5273" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tmag5273_of_match);
|
|
|
|
static struct i2c_driver tmag5273_driver = {
|
|
.driver = {
|
|
.name = "tmag5273",
|
|
.of_match_table = tmag5273_of_match,
|
|
.pm = pm_ptr(&tmag5273_pm_ops),
|
|
},
|
|
.probe_new = tmag5273_probe,
|
|
.id_table = tmag5273_id,
|
|
};
|
|
module_i2c_driver(tmag5273_driver);
|
|
|
|
MODULE_DESCRIPTION("TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor driver");
|
|
MODULE_AUTHOR("Gerald Loacker <gerald.loacker@wolfvision.net>");
|
|
MODULE_LICENSE("GPL");
|