linux/arch/x86/kernel/pci-dma.c
Yinghai Lu 5491ff511d x86/PCI: Remove dma32_reserve_bootmem
This workaround holds a dma32 buffer at early boot to prevent later
bootmem allocations from stealing it in the case of large RAM configs.

Now that x86 is using memblock, and the nobootmem wrapper does top-down
allocation, it's no longer necessary, so remove it.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-10 15:43:32 -07:00

260 lines
6.2 KiB
C

#include <linux/dma-mapping.h>
#include <linux/dma-debug.h>
#include <linux/dmar.h>
#include <linux/bootmem.h>
#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/kmemleak.h>
#include <asm/proto.h>
#include <asm/dma.h>
#include <asm/iommu.h>
#include <asm/gart.h>
#include <asm/calgary.h>
#include <asm/x86_init.h>
#include <asm/iommu_table.h>
static int forbid_dac __read_mostly;
struct dma_map_ops *dma_ops = &nommu_dma_ops;
EXPORT_SYMBOL(dma_ops);
static int iommu_sac_force __read_mostly;
#ifdef CONFIG_IOMMU_DEBUG
int panic_on_overflow __read_mostly = 1;
int force_iommu __read_mostly = 1;
#else
int panic_on_overflow __read_mostly = 0;
int force_iommu __read_mostly = 0;
#endif
int iommu_merge __read_mostly = 0;
int no_iommu __read_mostly;
/* Set this to 1 if there is a HW IOMMU in the system */
int iommu_detected __read_mostly = 0;
/*
* This variable becomes 1 if iommu=pt is passed on the kernel command line.
* If this variable is 1, IOMMU implementations do no DMA translation for
* devices and allow every device to access to whole physical memory. This is
* useful if a user wants to use an IOMMU only for KVM device assignment to
* guests and not for driver dma translation.
*/
int iommu_pass_through __read_mostly;
extern struct iommu_table_entry __iommu_table[], __iommu_table_end[];
/* Dummy device used for NULL arguments (normally ISA). */
struct device x86_dma_fallback_dev = {
.init_name = "fallback device",
.coherent_dma_mask = ISA_DMA_BIT_MASK,
.dma_mask = &x86_dma_fallback_dev.coherent_dma_mask,
};
EXPORT_SYMBOL(x86_dma_fallback_dev);
/* Number of entries preallocated for DMA-API debugging */
#define PREALLOC_DMA_DEBUG_ENTRIES 32768
int dma_set_mask(struct device *dev, u64 mask)
{
if (!dev->dma_mask || !dma_supported(dev, mask))
return -EIO;
*dev->dma_mask = mask;
return 0;
}
EXPORT_SYMBOL(dma_set_mask);
void __init pci_iommu_alloc(void)
{
struct iommu_table_entry *p;
sort_iommu_table(__iommu_table, __iommu_table_end);
check_iommu_entries(__iommu_table, __iommu_table_end);
for (p = __iommu_table; p < __iommu_table_end; p++) {
if (p && p->detect && p->detect() > 0) {
p->flags |= IOMMU_DETECTED;
if (p->early_init)
p->early_init();
if (p->flags & IOMMU_FINISH_IF_DETECTED)
break;
}
}
}
void *dma_generic_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_addr, gfp_t flag)
{
unsigned long dma_mask;
struct page *page;
dma_addr_t addr;
dma_mask = dma_alloc_coherent_mask(dev, flag);
flag |= __GFP_ZERO;
again:
page = alloc_pages_node(dev_to_node(dev), flag, get_order(size));
if (!page)
return NULL;
addr = page_to_phys(page);
if (addr + size > dma_mask) {
__free_pages(page, get_order(size));
if (dma_mask < DMA_BIT_MASK(32) && !(flag & GFP_DMA)) {
flag = (flag & ~GFP_DMA32) | GFP_DMA;
goto again;
}
return NULL;
}
*dma_addr = addr;
return page_address(page);
}
/*
* See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter
* documentation.
*/
static __init int iommu_setup(char *p)
{
iommu_merge = 1;
if (!p)
return -EINVAL;
while (*p) {
if (!strncmp(p, "off", 3))
no_iommu = 1;
/* gart_parse_options has more force support */
if (!strncmp(p, "force", 5))
force_iommu = 1;
if (!strncmp(p, "noforce", 7)) {
iommu_merge = 0;
force_iommu = 0;
}
if (!strncmp(p, "biomerge", 8)) {
iommu_merge = 1;
force_iommu = 1;
}
if (!strncmp(p, "panic", 5))
panic_on_overflow = 1;
if (!strncmp(p, "nopanic", 7))
panic_on_overflow = 0;
if (!strncmp(p, "merge", 5)) {
iommu_merge = 1;
force_iommu = 1;
}
if (!strncmp(p, "nomerge", 7))
iommu_merge = 0;
if (!strncmp(p, "forcesac", 8))
iommu_sac_force = 1;
if (!strncmp(p, "allowdac", 8))
forbid_dac = 0;
if (!strncmp(p, "nodac", 5))
forbid_dac = 1;
if (!strncmp(p, "usedac", 6)) {
forbid_dac = -1;
return 1;
}
#ifdef CONFIG_SWIOTLB
if (!strncmp(p, "soft", 4))
swiotlb = 1;
#endif
if (!strncmp(p, "pt", 2))
iommu_pass_through = 1;
gart_parse_options(p);
#ifdef CONFIG_CALGARY_IOMMU
if (!strncmp(p, "calgary", 7))
use_calgary = 1;
#endif /* CONFIG_CALGARY_IOMMU */
p += strcspn(p, ",");
if (*p == ',')
++p;
}
return 0;
}
early_param("iommu", iommu_setup);
int dma_supported(struct device *dev, u64 mask)
{
struct dma_map_ops *ops = get_dma_ops(dev);
#ifdef CONFIG_PCI
if (mask > 0xffffffff && forbid_dac > 0) {
dev_info(dev, "PCI: Disallowing DAC for device\n");
return 0;
}
#endif
if (ops->dma_supported)
return ops->dma_supported(dev, mask);
/* Copied from i386. Doesn't make much sense, because it will
only work for pci_alloc_coherent.
The caller just has to use GFP_DMA in this case. */
if (mask < DMA_BIT_MASK(24))
return 0;
/* Tell the device to use SAC when IOMMU force is on. This
allows the driver to use cheaper accesses in some cases.
Problem with this is that if we overflow the IOMMU area and
return DAC as fallback address the device may not handle it
correctly.
As a special case some controllers have a 39bit address
mode that is as efficient as 32bit (aic79xx). Don't force
SAC for these. Assume all masks <= 40 bits are of this
type. Normally this doesn't make any difference, but gives
more gentle handling of IOMMU overflow. */
if (iommu_sac_force && (mask >= DMA_BIT_MASK(40))) {
dev_info(dev, "Force SAC with mask %Lx\n", mask);
return 0;
}
return 1;
}
EXPORT_SYMBOL(dma_supported);
static int __init pci_iommu_init(void)
{
struct iommu_table_entry *p;
dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
#ifdef CONFIG_PCI
dma_debug_add_bus(&pci_bus_type);
#endif
x86_init.iommu.iommu_init();
for (p = __iommu_table; p < __iommu_table_end; p++) {
if (p && (p->flags & IOMMU_DETECTED) && p->late_init)
p->late_init();
}
return 0;
}
/* Must execute after PCI subsystem */
rootfs_initcall(pci_iommu_init);
#ifdef CONFIG_PCI
/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
static __devinit void via_no_dac(struct pci_dev *dev)
{
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
dev_info(&dev->dev, "disabling DAC on VIA PCI bridge\n");
forbid_dac = 1;
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
#endif