linux/drivers/thermal/samsung/exynos_thermal_common.h
Chanwoo Choi 56c64da7aa thermal: exynos: Add support for many TRIMINFO_CTRL registers
This patch support many TRIMINFO_CTRL registers if specific Exynos SoC
has one more TRIMINFO_CTRL registers. Also this patch uses proper 'RELOAD'
shift/mask bit operation to set RELOAD feature instead of static value.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Reviewed-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-02 23:02:48 -04:00

108 lines
3.1 KiB
C

/*
* exynos_thermal_common.h - Samsung EXYNOS common header file
*
* Copyright (C) 2013 Samsung Electronics
* Amit Daniel Kachhap <amit.daniel@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef _EXYNOS_THERMAL_COMMON_H
#define _EXYNOS_THERMAL_COMMON_H
/* In-kernel thermal framework related macros & definations */
#define SENSOR_NAME_LEN 16
#define MAX_TRIP_COUNT 8
#define MAX_COOLING_DEVICE 4
#define MAX_TRIMINFO_CTRL_REG 2
#define ACTIVE_INTERVAL 500
#define IDLE_INTERVAL 10000
#define MCELSIUS 1000
/* CPU Zone information */
#define PANIC_ZONE 4
#define WARN_ZONE 3
#define MONITOR_ZONE 2
#define SAFE_ZONE 1
#define GET_ZONE(trip) (trip + 2)
#define GET_TRIP(zone) (zone - 2)
enum trigger_type {
THROTTLE_ACTIVE = 1,
THROTTLE_PASSIVE,
SW_TRIP,
HW_TRIP,
};
/**
* struct freq_clip_table
* @freq_clip_max: maximum frequency allowed for this cooling state.
* @temp_level: Temperature level at which the temperature clipping will
* happen.
* @mask_val: cpumask of the allowed cpu's where the clipping will take place.
*
* This structure is required to be filled and passed to the
* cpufreq_cooling_unregister function.
*/
struct freq_clip_table {
unsigned int freq_clip_max;
unsigned int temp_level;
const struct cpumask *mask_val;
};
struct thermal_trip_point_conf {
int trip_val[MAX_TRIP_COUNT];
int trip_type[MAX_TRIP_COUNT];
int trip_count;
unsigned char trigger_falling;
};
struct thermal_cooling_conf {
struct freq_clip_table freq_data[MAX_TRIP_COUNT];
int freq_clip_count;
};
struct thermal_sensor_conf {
char name[SENSOR_NAME_LEN];
int (*read_temperature)(void *data);
int (*write_emul_temp)(void *drv_data, unsigned long temp);
struct thermal_trip_point_conf trip_data;
struct thermal_cooling_conf cooling_data;
void *driver_data;
void *pzone_data;
struct device *dev;
};
/*Functions used exynos based thermal sensor driver*/
#ifdef CONFIG_EXYNOS_THERMAL_CORE
void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf);
int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
void exynos_report_trigger(struct thermal_sensor_conf *sensor_conf);
#else
static inline void
exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf) { return; }
static inline int
exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) { return 0; }
static inline void
exynos_report_trigger(struct thermal_sensor_conf *sensor_conf) { return; }
#endif /* CONFIG_EXYNOS_THERMAL_CORE */
#endif /* _EXYNOS_THERMAL_COMMON_H */