linux/net/dsa/Kconfig
Alvin Šipraga 1521d5adfc net: dsa: tag_rtl8_4: add realtek 8 byte protocol 4 tag
This commit implements a basic version of the 8 byte tag protocol used
in the Realtek RTL8365MB-VC unmanaged switch, which carries with it a
protocol version of 0x04.

The implementation itself only handles the parsing of the EtherType
value and Realtek protocol version, together with the source or
destination port fields. The rest is left unimplemented for now.

The tag format is described in a confidential document provided to my
company by Realtek Semiconductor Corp. Permission has been granted by
the vendor to publish this driver based on that material, together with
an extract from the document describing the tag format and its fields.
It is hoped that this will help future implementors who do not have
access to the material but who wish to extend the functionality of
drivers for chips which use this protocol.

In addition, two possible values of the REASON field are specified,
based on experiments on my end. Realtek does not specify what value this
field can take.

Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18 14:02:56 +01:00

163 lines
5.4 KiB
Plaintext

# SPDX-License-Identifier: GPL-2.0-only
menuconfig NET_DSA
tristate "Distributed Switch Architecture"
depends on BRIDGE || BRIDGE=n
depends on HSR || HSR=n
depends on INET && NETDEVICES
select GRO_CELLS
select NET_SWITCHDEV
select PHYLINK
select NET_DEVLINK
imply NET_SELFTESTS
help
Say Y if you want to enable support for the hardware switches supported
by the Distributed Switch Architecture.
if NET_DSA
# Drivers must select the appropriate tagging format(s)
config NET_DSA_TAG_AR9331
tristate "Tag driver for Atheros AR9331 SoC with built-in switch"
help
Say Y or M if you want to enable support for tagging frames for
the Atheros AR9331 SoC with built-in switch.
config NET_DSA_TAG_BRCM_COMMON
tristate
default n
config NET_DSA_TAG_BRCM
tristate "Tag driver for Broadcom switches using in-frame headers"
select NET_DSA_TAG_BRCM_COMMON
help
Say Y if you want to enable support for tagging frames for the
Broadcom switches which place the tag after the MAC source address.
config NET_DSA_TAG_BRCM_LEGACY
tristate "Tag driver for Broadcom legacy switches using in-frame headers"
select NET_DSA_TAG_BRCM_COMMON
help
Say Y if you want to enable support for tagging frames for the
Broadcom legacy switches which place the tag after the MAC source
address.
config NET_DSA_TAG_BRCM_PREPEND
tristate "Tag driver for Broadcom switches using prepended headers"
select NET_DSA_TAG_BRCM_COMMON
help
Say Y if you want to enable support for tagging frames for the
Broadcom switches which places the tag before the Ethernet header
(prepended).
config NET_DSA_TAG_HELLCREEK
tristate "Tag driver for Hirschmann Hellcreek TSN switches"
help
Say Y or M if you want to enable support for tagging frames
for the Hirschmann Hellcreek TSN switches.
config NET_DSA_TAG_GSWIP
tristate "Tag driver for Lantiq / Intel GSWIP switches"
help
Say Y or M if you want to enable support for tagging frames for the
Lantiq / Intel GSWIP switches.
config NET_DSA_TAG_DSA_COMMON
tristate
config NET_DSA_TAG_DSA
tristate "Tag driver for Marvell switches using DSA headers"
select NET_DSA_TAG_DSA_COMMON
help
Say Y or M if you want to enable support for tagging frames for the
Marvell switches which use DSA headers.
config NET_DSA_TAG_EDSA
tristate "Tag driver for Marvell switches using EtherType DSA headers"
select NET_DSA_TAG_DSA_COMMON
help
Say Y or M if you want to enable support for tagging frames for the
Marvell switches which use EtherType DSA headers.
config NET_DSA_TAG_MTK
tristate "Tag driver for Mediatek switches"
help
Say Y or M if you want to enable support for tagging frames for
Mediatek switches.
config NET_DSA_TAG_KSZ
tristate "Tag driver for Microchip 8795/9477/9893 families of switches"
help
Say Y if you want to enable support for tagging frames for the
Microchip 8795/9477/9893 families of switches.
config NET_DSA_TAG_OCELOT
tristate "Tag driver for Ocelot family of switches, using NPI port"
select PACKING
help
Say Y or M if you want to enable NPI tagging for the Ocelot switches
(VSC7511, VSC7512, VSC7513, VSC7514, VSC9953, VSC9959). In this mode,
the frames over the Ethernet CPU port are prepended with a
hardware-defined injection/extraction frame header. Flow control
(PAUSE frames) over the CPU port is not supported when operating in
this mode.
config NET_DSA_TAG_OCELOT_8021Q
tristate "Tag driver for Ocelot family of switches, using VLAN"
help
Say Y or M if you want to enable support for tagging frames with a
custom VLAN-based header. Frames that require timestamping, such as
PTP, are not delivered over Ethernet but over register-based MMIO.
Flow control over the CPU port is functional in this mode. When using
this mode, less TCAM resources (VCAP IS1, IS2, ES0) are available for
use with tc-flower.
config NET_DSA_TAG_QCA
tristate "Tag driver for Qualcomm Atheros QCA8K switches"
help
Say Y or M if you want to enable support for tagging frames for
the Qualcomm Atheros QCA8K switches.
config NET_DSA_TAG_RTL4_A
tristate "Tag driver for Realtek 4 byte protocol A tags"
help
Say Y or M if you want to enable support for tagging frames for the
Realtek switches with 4 byte protocol A tags, sich as found in
the Realtek RTL8366RB.
config NET_DSA_TAG_RTL8_4
tristate "Tag driver for Realtek 8 byte protocol 4 tags"
help
Say Y or M if you want to enable support for tagging frames for Realtek
switches with 8 byte protocol 4 tags, such as the Realtek RTL8365MB-VC.
config NET_DSA_TAG_LAN9303
tristate "Tag driver for SMSC/Microchip LAN9303 family of switches"
help
Say Y or M if you want to enable support for tagging frames for the
SMSC/Microchip LAN9303 family of switches.
config NET_DSA_TAG_SJA1105
tristate "Tag driver for NXP SJA1105 switches"
select PACKING
help
Say Y or M if you want to enable support for tagging frames with the
NXP SJA1105 switch family. Both the native tagging protocol (which
is only for link-local traffic) as well as non-native tagging (based
on a custom 802.1Q VLAN header) are available.
config NET_DSA_TAG_TRAILER
tristate "Tag driver for switches using a trailer tag"
help
Say Y or M if you want to enable support for tagging frames at
with a trailed. e.g. Marvell 88E6060.
config NET_DSA_TAG_XRS700X
tristate "Tag driver for XRS700x switches"
help
Say Y or M if you want to enable support for tagging frames for
Arrow SpeedChips XRS700x switches that use a single byte tag trailer.
endif