linux/arch/arm/mach-kirkwood/board-openblocks_a6.c
Nobuhiro Iwamatsu 155acbe7f7 ARM: Kirkwood: Add support LED of OpenBlocks A6
OpenBlocks A6 has three leds via GPIO. This supports them.
And this fix typo about led, because hardware manual has typo.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-24 02:59:12 +00:00

71 lines
1.6 KiB
C

/*
* Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*
* arch/arm/mach-kirkwood/board-openblocks_a6.c
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
#include <linux/clk.h>
#include <linux/clk-private.h>
#include "common.h"
#include "mpp.h"
static struct mv643xx_eth_platform_data openblocks_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static unsigned int openblocks_a6_mpp_config[] __initdata = {
MPP0_NF_IO2,
MPP1_NF_IO3,
MPP2_NF_IO4,
MPP3_NF_IO5,
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP6_SYSRST_OUTn,
MPP8_UART1_RTS,
MPP9_UART1_CTS,
MPP10_UART0_TXD,
MPP11_UART0_RXD,
MPP13_UART1_TXD,
MPP14_UART1_RXD,
MPP15_UART0_RTS,
MPP16_UART0_CTS,
MPP18_NF_IO0,
MPP19_NF_IO1,
MPP20_GPIO, /* DIP SW0 */
MPP21_GPIO, /* DIP SW1 */
MPP22_GPIO, /* DIP SW2 */
MPP23_GPIO, /* DIP SW3 */
MPP24_GPIO, /* GPIO 0 */
MPP25_GPIO, /* GPIO 1 */
MPP26_GPIO, /* GPIO 2 */
MPP27_GPIO, /* GPIO 3 */
MPP28_GPIO, /* GPIO 4 */
MPP29_GPIO, /* GPIO 5 */
MPP30_GPIO, /* GPIO 6 */
MPP31_GPIO, /* GPIO 7 */
MPP36_TW1_SDA,
MPP37_TW1_SCK,
MPP38_GPIO, /* INIT */
MPP39_GPIO, /* USB OC */
MPP41_GPIO, /* LED: Red */
MPP42_GPIO, /* LED: Green */
MPP43_GPIO, /* LED: Yellow */
0,
};
void __init openblocks_a6_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_mpp_conf(openblocks_a6_mpp_config);
kirkwood_ge00_init(&openblocks_ge00_data);
}