linux/include/net/regulatory.h
Luis R. Rodriguez b68e6b3b33 cfg80211: pass DFS region to drivers through reg_notifier()
This grants drivers access to the DFS region that a
regulatory domain belongs to.

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-21 16:20:41 -05:00

123 lines
4.3 KiB
C

#ifndef __NET_REGULATORY_H
#define __NET_REGULATORY_H
/*
* regulatory support structures
*
* Copyright 2008-2009 Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/**
* enum environment_cap - Environment parsed from country IE
* @ENVIRON_ANY: indicates country IE applies to both indoor and
* outdoor operation.
* @ENVIRON_INDOOR: indicates country IE applies only to indoor operation
* @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation
*/
enum environment_cap {
ENVIRON_ANY,
ENVIRON_INDOOR,
ENVIRON_OUTDOOR,
};
/**
* struct regulatory_request - used to keep track of regulatory requests
*
* @wiphy_idx: this is set if this request's initiator is
* %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
* can be used by the wireless core to deal with conflicts
* and potentially inform users of which devices specifically
* cased the conflicts.
* @initiator: indicates who sent this request, could be any of
* of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
* @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
* regulatory domain. We have a few special codes:
* 00 - World regulatory domain
* 99 - built by driver but a specific alpha2 cannot be determined
* 98 - result of an intersection between two regulatory domains
* 97 - regulatory domain has not yet been configured
* @dfs_region: If CRDA responded with a regulatory domain that requires
* DFS master operation on a known DFS region (NL80211_DFS_*),
* dfs_region represents that region. Drivers can use this and the
* @alpha2 to adjust their device's DFS parameters as required.
* @intersect: indicates whether the wireless core should intersect
* the requested regulatory domain with the presently set regulatory
* domain.
* @processed: indicates whether or not this requests has already been
* processed. When the last request is processed it means that the
* currently regulatory domain set on cfg80211 is updated from
* CRDA and can be used by other regulatory requests. When a
* the last request is not yet processed we must yield until it
* is processed before processing any new requests.
* @country_ie_checksum: checksum of the last processed and accepted
* country IE
* @country_ie_env: lets us know if the AP is telling us we are outdoor,
* indoor, or if it doesn't matter
* @list: used to insert into the reg_requests_list linked list
*/
struct regulatory_request {
int wiphy_idx;
enum nl80211_reg_initiator initiator;
char alpha2[2];
u8 dfs_region;
bool intersect;
bool processed;
enum environment_cap country_ie_env;
struct list_head list;
};
struct ieee80211_freq_range {
u32 start_freq_khz;
u32 end_freq_khz;
u32 max_bandwidth_khz;
};
struct ieee80211_power_rule {
u32 max_antenna_gain;
u32 max_eirp;
};
struct ieee80211_reg_rule {
struct ieee80211_freq_range freq_range;
struct ieee80211_power_rule power_rule;
u32 flags;
};
struct ieee80211_regdomain {
u32 n_reg_rules;
char alpha2[2];
u8 dfs_region;
struct ieee80211_reg_rule reg_rules[];
};
#define MHZ_TO_KHZ(freq) ((freq) * 1000)
#define KHZ_TO_MHZ(freq) ((freq) / 1000)
#define DBI_TO_MBI(gain) ((gain) * 100)
#define MBI_TO_DBI(gain) ((gain) / 100)
#define DBM_TO_MBM(gain) ((gain) * 100)
#define MBM_TO_DBM(gain) ((gain) / 100)
#define REG_RULE(start, end, bw, gain, eirp, reg_flags) \
{ \
.freq_range.start_freq_khz = MHZ_TO_KHZ(start), \
.freq_range.end_freq_khz = MHZ_TO_KHZ(end), \
.freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \
.power_rule.max_antenna_gain = DBI_TO_MBI(gain),\
.power_rule.max_eirp = DBM_TO_MBM(eirp), \
.flags = reg_flags, \
}
#endif