linux/drivers/power/max8925_power.c
Philip Rakity b57f2f6108 max8925_power: Do not read random data from chip registers
Reading the voltage, charge etc requires that we tell the chip
what property we want to read before reading it according to
maxim.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Thomas Liu <Thomas.Liu@maxim-ic.com>
Tested-by: Ted Bennett <tbennett@marvell.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-11-26 04:31:47 +04:00

534 lines
14 KiB
C

/*
* Battery driver for Maxim MAX8925
*
* Copyright (c) 2009-2010 Marvell International Ltd.
* Haojian Zhuang <haojian.zhuang@marvell.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/mfd/max8925.h>
/* registers in GPM */
#define MAX8925_OUT5VEN 0x54
#define MAX8925_OUT3VEN 0x58
#define MAX8925_CHG_CNTL1 0x7c
/* bits definition */
#define MAX8925_CHG_STAT_VSYSLOW (1 << 0)
#define MAX8925_CHG_STAT_MODE_MASK (3 << 2)
#define MAX8925_CHG_STAT_EN_MASK (1 << 4)
#define MAX8925_CHG_MBDET (1 << 1)
#define MAX8925_CHG_AC_RANGE_MASK (3 << 6)
/* registers in ADC */
#define MAX8925_ADC_RES_CNFG1 0x06
#define MAX8925_ADC_AVG_CNFG1 0x07
#define MAX8925_ADC_ACQ_CNFG1 0x08
#define MAX8925_ADC_ACQ_CNFG2 0x09
/* 2 bytes registers in below. MSB is 1st, LSB is 2nd. */
#define MAX8925_ADC_AUX2 0x62
#define MAX8925_ADC_VCHG 0x64
#define MAX8925_ADC_VBBATT 0x66
#define MAX8925_ADC_VMBATT 0x68
#define MAX8925_ADC_ISNS 0x6a
#define MAX8925_ADC_THM 0x6c
#define MAX8925_ADC_TDIE 0x6e
#define MAX8925_CMD_AUX2 0xc8
#define MAX8925_CMD_VCHG 0xd0
#define MAX8925_CMD_VBBATT 0xd8
#define MAX8925_CMD_VMBATT 0xe0
#define MAX8925_CMD_ISNS 0xe8
#define MAX8925_CMD_THM 0xf0
#define MAX8925_CMD_TDIE 0xf8
enum {
MEASURE_AUX2,
MEASURE_VCHG,
MEASURE_VBBATT,
MEASURE_VMBATT,
MEASURE_ISNS,
MEASURE_THM,
MEASURE_TDIE,
MEASURE_MAX,
};
struct max8925_power_info {
struct max8925_chip *chip;
struct i2c_client *gpm;
struct i2c_client *adc;
struct power_supply ac;
struct power_supply usb;
struct power_supply battery;
int irq_base;
unsigned ac_online:1;
unsigned usb_online:1;
unsigned bat_online:1;
unsigned chg_mode:2;
unsigned batt_detect:1; /* detecing MB by ID pin */
unsigned topoff_threshold:2;
unsigned fast_charge:3;
unsigned no_temp_support:1;
unsigned no_insert_detect:1;
int (*set_charger) (int);
};
static int __set_charger(struct max8925_power_info *info, int enable)
{
struct max8925_chip *chip = info->chip;
if (enable) {
/* enable charger in platform */
if (info->set_charger)
info->set_charger(1);
/* enable charger */
max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 0);
} else {
/* disable charge */
max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7);
if (info->set_charger)
info->set_charger(0);
}
dev_dbg(chip->dev, "%s\n", (enable) ? "Enable charger"
: "Disable charger");
return 0;
}
static irqreturn_t max8925_charger_handler(int irq, void *data)
{
struct max8925_power_info *info = (struct max8925_power_info *)data;
struct max8925_chip *chip = info->chip;
switch (irq - chip->irq_base) {
case MAX8925_IRQ_VCHG_DC_R:
info->ac_online = 1;
__set_charger(info, 1);
dev_dbg(chip->dev, "Adapter inserted\n");
break;
case MAX8925_IRQ_VCHG_DC_F:
info->ac_online = 0;
__set_charger(info, 0);
dev_dbg(chip->dev, "Adapter removed\n");
break;
case MAX8925_IRQ_VCHG_THM_OK_F:
/* Battery is not ready yet */
dev_dbg(chip->dev, "Battery temperature is out of range\n");
case MAX8925_IRQ_VCHG_DC_OVP:
dev_dbg(chip->dev, "Error detection\n");
__set_charger(info, 0);
break;
case MAX8925_IRQ_VCHG_THM_OK_R:
/* Battery is ready now */
dev_dbg(chip->dev, "Battery temperature is in range\n");
break;
case MAX8925_IRQ_VCHG_SYSLOW_R:
/* VSYS is low */
dev_info(chip->dev, "Sys power is too low\n");
break;
case MAX8925_IRQ_VCHG_SYSLOW_F:
dev_dbg(chip->dev, "Sys power is above low threshold\n");
break;
case MAX8925_IRQ_VCHG_DONE:
__set_charger(info, 0);
dev_dbg(chip->dev, "Charging is done\n");
break;
case MAX8925_IRQ_VCHG_TOPOFF:
dev_dbg(chip->dev, "Charging in top-off mode\n");
break;
case MAX8925_IRQ_VCHG_TMR_FAULT:
__set_charger(info, 0);
dev_dbg(chip->dev, "Safe timer is expired\n");
break;
case MAX8925_IRQ_VCHG_RST:
__set_charger(info, 0);
dev_dbg(chip->dev, "Charger is reset\n");
break;
}
return IRQ_HANDLED;
}
static int start_measure(struct max8925_power_info *info, int type)
{
unsigned char buf[2] = {0, 0};
int meas_cmd;
int meas_reg = 0, ret;
switch (type) {
case MEASURE_VCHG:
meas_cmd = MAX8925_CMD_VCHG;
meas_reg = MAX8925_ADC_VCHG;
break;
case MEASURE_VBBATT:
meas_cmd = MAX8925_CMD_VBBATT;
meas_reg = MAX8925_ADC_VBBATT;
break;
case MEASURE_VMBATT:
meas_cmd = MAX8925_CMD_VMBATT;
meas_reg = MAX8925_ADC_VMBATT;
break;
case MEASURE_ISNS:
meas_cmd = MAX8925_CMD_ISNS;
meas_reg = MAX8925_ADC_ISNS;
break;
default:
return -EINVAL;
}
max8925_reg_write(info->adc, meas_cmd, 0);
max8925_bulk_read(info->adc, meas_reg, 2, buf);
ret = ((buf[0]<<8) | buf[1]) >> 4;
return ret;
}
static int max8925_ac_get_prop(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct max8925_power_info *info = dev_get_drvdata(psy->dev->parent);
int ret = 0;
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
val->intval = info->ac_online;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
if (info->ac_online) {
ret = start_measure(info, MEASURE_VCHG);
if (ret >= 0) {
val->intval = ret * 2000; /* unit is uV */
goto out;
}
}
ret = -ENODATA;
break;
default:
ret = -ENODEV;
break;
}
out:
return ret;
}
static enum power_supply_property max8925_ac_props[] = {
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
};
static int max8925_usb_get_prop(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct max8925_power_info *info = dev_get_drvdata(psy->dev->parent);
int ret = 0;
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
val->intval = info->usb_online;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
if (info->usb_online) {
ret = start_measure(info, MEASURE_VCHG);
if (ret >= 0) {
val->intval = ret * 2000; /* unit is uV */
goto out;
}
}
ret = -ENODATA;
break;
default:
ret = -ENODEV;
break;
}
out:
return ret;
}
static enum power_supply_property max8925_usb_props[] = {
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
};
static int max8925_bat_get_prop(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct max8925_power_info *info = dev_get_drvdata(psy->dev->parent);
int ret = 0;
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
val->intval = info->bat_online;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
if (info->bat_online) {
ret = start_measure(info, MEASURE_VMBATT);
if (ret >= 0) {
val->intval = ret * 2000; /* unit is uV */
ret = 0;
break;
}
}
ret = -ENODATA;
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
if (info->bat_online) {
ret = start_measure(info, MEASURE_ISNS);
if (ret >= 0) {
/* assume r_sns is 0.02 */
ret = ((ret * 6250) - 3125) /* uA */;
val->intval = 0;
if (ret > 0)
val->intval = ret; /* unit is mA */
ret = 0;
break;
}
}
ret = -ENODATA;
break;
case POWER_SUPPLY_PROP_CHARGE_TYPE:
if (!info->bat_online) {
ret = -ENODATA;
break;
}
ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
ret = (ret & MAX8925_CHG_STAT_MODE_MASK) >> 2;
switch (ret) {
case 1:
val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
break;
case 0:
case 2:
val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
break;
case 3:
val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
break;
}
ret = 0;
break;
case POWER_SUPPLY_PROP_STATUS:
if (!info->bat_online) {
ret = -ENODATA;
break;
}
ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
if (info->usb_online || info->ac_online) {
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
if (ret & MAX8925_CHG_STAT_EN_MASK)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
} else
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
ret = 0;
break;
default:
ret = -ENODEV;
break;
}
return ret;
}
static enum power_supply_property max8925_battery_props[] = {
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_CURRENT_NOW,
POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_STATUS,
};
#define REQUEST_IRQ(_irq, _name) \
do { \
ret = request_threaded_irq(chip->irq_base + _irq, NULL, \
max8925_charger_handler, \
IRQF_ONESHOT, _name, info); \
if (ret) \
dev_err(chip->dev, "Failed to request IRQ #%d: %d\n", \
_irq, ret); \
} while (0)
static __devinit int max8925_init_charger(struct max8925_chip *chip,
struct max8925_power_info *info)
{
int ret;
REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_OVP, "ac-ovp");
if (!info->no_insert_detect) {
REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_F, "ac-remove");
REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_R, "ac-insert");
}
if (!info->no_temp_support) {
REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range");
REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range");
}
REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_F, "vsys-high");
REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_R, "vsys-low");
REQUEST_IRQ(MAX8925_IRQ_VCHG_RST, "charger-reset");
REQUEST_IRQ(MAX8925_IRQ_VCHG_DONE, "charger-done");
REQUEST_IRQ(MAX8925_IRQ_VCHG_TOPOFF, "charger-topoff");
REQUEST_IRQ(MAX8925_IRQ_VCHG_TMR_FAULT, "charger-timer-expire");
info->ac_online = 0;
info->usb_online = 0;
info->bat_online = 0;
ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
if (ret >= 0) {
/*
* If battery detection is enabled, ID pin of battery is
* connected to MBDET pin of MAX8925. It could be used to
* detect battery presence.
* Otherwise, we have to assume that battery is always on.
*/
if (info->batt_detect)
info->bat_online = (ret & MAX8925_CHG_MBDET) ? 0 : 1;
else
info->bat_online = 1;
if (ret & MAX8925_CHG_AC_RANGE_MASK)
info->ac_online = 1;
else
info->ac_online = 0;
}
/* disable charge */
max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7);
/* set charging current in charge topoff mode */
max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 3 << 5,
info->topoff_threshold << 5);
/* set charing current in fast charge mode */
max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 7, info->fast_charge);
return 0;
}
static __devexit int max8925_deinit_charger(struct max8925_power_info *info)
{
struct max8925_chip *chip = info->chip;
int irq;
irq = chip->irq_base + MAX8925_IRQ_VCHG_DC_OVP;
for (; irq <= chip->irq_base + MAX8925_IRQ_VCHG_TMR_FAULT; irq++)
free_irq(irq, info);
return 0;
}
static __devinit int max8925_power_probe(struct platform_device *pdev)
{
struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
struct max8925_power_pdata *pdata = NULL;
struct max8925_power_info *info;
int ret;
pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev, "platform data isn't assigned to "
"power supply\n");
return -EINVAL;
}
info = kzalloc(sizeof(struct max8925_power_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->chip = chip;
info->gpm = chip->i2c;
info->adc = chip->adc;
platform_set_drvdata(pdev, info);
info->ac.name = "max8925-ac";
info->ac.type = POWER_SUPPLY_TYPE_MAINS;
info->ac.properties = max8925_ac_props;
info->ac.num_properties = ARRAY_SIZE(max8925_ac_props);
info->ac.get_property = max8925_ac_get_prop;
info->ac.supplied_to = pdata->supplied_to;
info->ac.num_supplicants = pdata->num_supplicants;
ret = power_supply_register(&pdev->dev, &info->ac);
if (ret)
goto out;
info->ac.dev->parent = &pdev->dev;
info->usb.name = "max8925-usb";
info->usb.type = POWER_SUPPLY_TYPE_USB;
info->usb.properties = max8925_usb_props;
info->usb.num_properties = ARRAY_SIZE(max8925_usb_props);
info->usb.get_property = max8925_usb_get_prop;
info->usb.supplied_to = pdata->supplied_to;
info->usb.num_supplicants = pdata->num_supplicants;
ret = power_supply_register(&pdev->dev, &info->usb);
if (ret)
goto out_usb;
info->usb.dev->parent = &pdev->dev;
info->battery.name = "max8925-battery";
info->battery.type = POWER_SUPPLY_TYPE_BATTERY;
info->battery.properties = max8925_battery_props;
info->battery.num_properties = ARRAY_SIZE(max8925_battery_props);
info->battery.get_property = max8925_bat_get_prop;
ret = power_supply_register(&pdev->dev, &info->battery);
if (ret)
goto out_battery;
info->battery.dev->parent = &pdev->dev;
info->batt_detect = pdata->batt_detect;
info->topoff_threshold = pdata->topoff_threshold;
info->fast_charge = pdata->fast_charge;
info->set_charger = pdata->set_charger;
info->no_temp_support = pdata->no_temp_support;
info->no_insert_detect = pdata->no_insert_detect;
max8925_init_charger(chip, info);
return 0;
out_battery:
power_supply_unregister(&info->battery);
out_usb:
power_supply_unregister(&info->ac);
out:
kfree(info);
return ret;
}
static __devexit int max8925_power_remove(struct platform_device *pdev)
{
struct max8925_power_info *info = platform_get_drvdata(pdev);
if (info) {
power_supply_unregister(&info->ac);
power_supply_unregister(&info->usb);
power_supply_unregister(&info->battery);
max8925_deinit_charger(info);
kfree(info);
}
return 0;
}
static struct platform_driver max8925_power_driver = {
.probe = max8925_power_probe,
.remove = __devexit_p(max8925_power_remove),
.driver = {
.name = "max8925-power",
},
};
static int __init max8925_power_init(void)
{
return platform_driver_register(&max8925_power_driver);
}
module_init(max8925_power_init);
static void __exit max8925_power_exit(void)
{
platform_driver_unregister(&max8925_power_driver);
}
module_exit(max8925_power_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Power supply driver for MAX8925");
MODULE_ALIAS("platform:max8925-power");