linux/arch/arm/boot/dts/imx25-pdk.dts
Fabio Estevam f0ee0450d1 ARM: dts: imx25-pdk: Add USB Host1 support
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16 23:01:44 +08:00

252 lines
5.6 KiB
Plaintext

/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "imx25.dtsi"
/ {
model = "Freescale i.MX25 Product Development Kit";
compatible = "fsl,imx25-pdk", "fsl,imx25";
memory {
reg = <0x80000000 0x4000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_fec_3v3: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 3 0>;
enable-active-high;
};
reg_2p5v: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
reg_3p3v: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_can_3v3: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 6 0>;
};
};
sound {
compatible = "fsl,imx25-pdk-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx25-pdk-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1>;
xceiver-supply = <&reg_can_3v3>;
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio2 1 0>;
wp-gpios = <&gpio2 0 0>;
status = "okay";
};
&fec {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-supply = <&reg_fec_3v3>;
phy-reset-gpios = <&gpio4 8 0>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 129>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
};
};
&iomuxc {
imx25-pdk {
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX25_PAD_RW__AUD4_TXFS 0xe0
MX25_PAD_OE__AUD4_TXC 0xe0
MX25_PAD_EB0__AUD4_TXD 0xe0
MX25_PAD_EB1__AUD4_RXD 0xe0
>;
};
pinctrl_can1: can1grp {
fsl,pins = <
MX25_PAD_GPIO_A__CAN1_TX 0x0
MX25_PAD_GPIO_B__CAN1_RX 0x0
MX25_PAD_D14__GPIO_4_6 0x80000000
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX25_PAD_SD1_CMD__SD1_CMD 0x80000000
MX25_PAD_SD1_CLK__SD1_CLK 0x80000000
MX25_PAD_SD1_DATA0__SD1_DATA0 0x80000000
MX25_PAD_SD1_DATA1__SD1_DATA1 0x80000000
MX25_PAD_SD1_DATA2__SD1_DATA2 0x80000000
MX25_PAD_SD1_DATA3__SD1_DATA3 0x80000000
MX25_PAD_A14__GPIO_2_0 0x80000000
MX25_PAD_A15__GPIO_2_1 0x80000000
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0
MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0
MX25_PAD_A17__GPIO_2_3 0x80000000
MX25_PAD_D12__GPIO_4_8 0x80000000
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000
MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000
>;
};
pinctrl_kpp: kppgrp {
fsl,pins = <
MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000
MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000
MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000
MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000
MX25_PAD_KPP_COL0__KPP_COL0 0x80000000
MX25_PAD_KPP_COL1__KPP_COL1 0x80000000
MX25_PAD_KPP_COL2__KPP_COL2 0x80000000
MX25_PAD_KPP_COL3__KPP_COL3 0x80000000
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX25_PAD_UART1_RTS__UART1_RTS 0xe0
MX25_PAD_UART1_CTS__UART1_CTS 0xe0
MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
MX25_PAD_UART1_RXD__UART1_RXD 0xc0
>;
};
};
};
&nfc {
nand-on-flash-bbt;
status = "okay";
};
&kpp {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_kpp>;
linux,keymap = <
MATRIX_KEY(0x0, 0x0, KEY_UP)
MATRIX_KEY(0x0, 0x1, KEY_DOWN)
MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN)
MATRIX_KEY(0x0, 0x3, KEY_HOME)
MATRIX_KEY(0x1, 0x0, KEY_RIGHT)
MATRIX_KEY(0x1, 0x1, KEY_LEFT)
MATRIX_KEY(0x1, 0x2, KEY_ENTER)
MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP)
MATRIX_KEY(0x2, 0x0, KEY_F6)
MATRIX_KEY(0x2, 0x1, KEY_F8)
MATRIX_KEY(0x2, 0x2, KEY_F9)
MATRIX_KEY(0x2, 0x3, KEY_F10)
MATRIX_KEY(0x3, 0x0, KEY_F1)
MATRIX_KEY(0x3, 0x1, KEY_F2)
MATRIX_KEY(0x3, 0x2, KEY_F3)
MATRIX_KEY(0x3, 0x2, KEY_POWER)
>;
status = "okay";
};
&ssi1 {
codec-handle = <&codec>;
fsl,mode = "i2s-slave";
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
fsl,uart-has-rtscts;
status = "okay";
};
&usbhost1 {
phy_type = "serial";
dr_mode = "host";
status = "okay";
};