linux/drivers/gpio/gpio-stmpe.c
Andy Shevchenko 448cf90513 gpio: Get rid of duplicate of_node assignment in the drivers
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove these assignment all at once.

For the details one may look into the of_gpio_dev_init() implementation.

While at it, remove duplicate parent device assignment where it is the case.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-12-17 17:39:35 +01:00

540 lines
14 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/mfd/stmpe.h>
#include <linux/seq_file.h>
#include <linux/bitops.h>
/*
* These registers are modified under the irq bus lock and cached to avoid
* unnecessary writes in bus_sync_unlock.
*/
enum { REG_RE, REG_FE, REG_IE };
enum { LSB, CSB, MSB };
#define CACHE_NR_REGS 3
/* No variant has more than 24 GPIOs */
#define CACHE_NR_BANKS (24 / 8)
struct stmpe_gpio {
struct gpio_chip chip;
struct stmpe *stmpe;
struct device *dev;
struct mutex irq_lock;
u32 norequest_mask;
/* Caches of interrupt control registers for bus_lock */
u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
};
static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)];
u8 mask = BIT(offset % 8);
int ret;
ret = stmpe_reg_read(stmpe, reg);
if (ret < 0)
return ret;
return !!(ret & mask);
}
static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB;
u8 reg = stmpe->regs[which + (offset / 8)];
u8 mask = BIT(offset % 8);
/*
* Some variants have single register for gpio set/clear functionality.
* For them we need to write 0 to clear and 1 to set.
*/
if (stmpe->regs[STMPE_IDX_GPSR_LSB] == stmpe->regs[STMPE_IDX_GPCR_LSB])
stmpe_set_bits(stmpe, reg, mask, val ? mask : 0);
else
stmpe_reg_write(stmpe, reg, mask);
}
static int stmpe_gpio_get_direction(struct gpio_chip *chip,
unsigned offset)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8);
u8 mask = BIT(offset % 8);
int ret;
ret = stmpe_reg_read(stmpe, reg);
if (ret < 0)
return ret;
if (ret & mask)
return GPIO_LINE_DIRECTION_OUT;
return GPIO_LINE_DIRECTION_IN;
}
static int stmpe_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int val)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
u8 mask = BIT(offset % 8);
stmpe_gpio_set(chip, offset, val);
return stmpe_set_bits(stmpe, reg, mask, mask);
}
static int stmpe_gpio_direction_input(struct gpio_chip *chip,
unsigned offset)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)];
u8 mask = BIT(offset % 8);
return stmpe_set_bits(stmpe, reg, mask, 0);
}
static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip);
struct stmpe *stmpe = stmpe_gpio->stmpe;
if (stmpe_gpio->norequest_mask & BIT(offset))
return -EINVAL;
return stmpe_set_altfunc(stmpe, BIT(offset), STMPE_BLOCK_GPIO);
}
static const struct gpio_chip template_chip = {
.label = "stmpe",
.owner = THIS_MODULE,
.get_direction = stmpe_gpio_get_direction,
.direction_input = stmpe_gpio_direction_input,
.get = stmpe_gpio_get,
.direction_output = stmpe_gpio_direction_output,
.set = stmpe_gpio_set,
.request = stmpe_gpio_request,
.can_sleep = true,
};
static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
int offset = d->hwirq;
int regoffset = offset / 8;
int mask = BIT(offset % 8);
if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH)
return -EINVAL;
/* STMPE801 and STMPE 1600 don't have RE and FE registers */
if (stmpe_gpio->stmpe->partnum == STMPE801 ||
stmpe_gpio->stmpe->partnum == STMPE1600)
return 0;
if (type & IRQ_TYPE_EDGE_RISING)
stmpe_gpio->regs[REG_RE][regoffset] |= mask;
else
stmpe_gpio->regs[REG_RE][regoffset] &= ~mask;
if (type & IRQ_TYPE_EDGE_FALLING)
stmpe_gpio->regs[REG_FE][regoffset] |= mask;
else
stmpe_gpio->regs[REG_FE][regoffset] &= ~mask;
return 0;
}
static void stmpe_gpio_irq_lock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
mutex_lock(&stmpe_gpio->irq_lock);
}
static void stmpe_gpio_irq_sync_unlock(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
struct stmpe *stmpe = stmpe_gpio->stmpe;
int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
static const u8 regmap[CACHE_NR_REGS][CACHE_NR_BANKS] = {
[REG_RE][LSB] = STMPE_IDX_GPRER_LSB,
[REG_RE][CSB] = STMPE_IDX_GPRER_CSB,
[REG_RE][MSB] = STMPE_IDX_GPRER_MSB,
[REG_FE][LSB] = STMPE_IDX_GPFER_LSB,
[REG_FE][CSB] = STMPE_IDX_GPFER_CSB,
[REG_FE][MSB] = STMPE_IDX_GPFER_MSB,
[REG_IE][LSB] = STMPE_IDX_IEGPIOR_LSB,
[REG_IE][CSB] = STMPE_IDX_IEGPIOR_CSB,
[REG_IE][MSB] = STMPE_IDX_IEGPIOR_MSB,
};
int i, j;
/*
* STMPE1600: to be able to get IRQ from pins,
* a read must be done on GPMR register, or a write in
* GPSR or GPCR registers
*/
if (stmpe->partnum == STMPE1600) {
stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_LSB]);
stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_CSB]);
}
for (i = 0; i < CACHE_NR_REGS; i++) {
/* STMPE801 and STMPE1600 don't have RE and FE registers */
if ((stmpe->partnum == STMPE801 ||
stmpe->partnum == STMPE1600) &&
(i != REG_IE))
continue;
for (j = 0; j < num_banks; j++) {
u8 old = stmpe_gpio->oldregs[i][j];
u8 new = stmpe_gpio->regs[i][j];
if (new == old)
continue;
stmpe_gpio->oldregs[i][j] = new;
stmpe_reg_write(stmpe, stmpe->regs[regmap[i][j]], new);
}
}
mutex_unlock(&stmpe_gpio->irq_lock);
}
static void stmpe_gpio_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
int offset = d->hwirq;
int regoffset = offset / 8;
int mask = BIT(offset % 8);
stmpe_gpio->regs[REG_IE][regoffset] &= ~mask;
}
static void stmpe_gpio_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
int offset = d->hwirq;
int regoffset = offset / 8;
int mask = BIT(offset % 8);
stmpe_gpio->regs[REG_IE][regoffset] |= mask;
}
static void stmpe_dbg_show_one(struct seq_file *s,
struct gpio_chip *gc,
unsigned offset, unsigned gpio)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
struct stmpe *stmpe = stmpe_gpio->stmpe;
const char *label = gpiochip_is_requested(gc, offset);
bool val = !!stmpe_gpio_get(gc, offset);
u8 bank = offset / 8;
u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank];
u8 mask = BIT(offset % 8);
int ret;
u8 dir;
ret = stmpe_reg_read(stmpe, dir_reg);
if (ret < 0)
return;
dir = !!(ret & mask);
if (dir) {
seq_printf(s, " gpio-%-3d (%-20.20s) out %s",
gpio, label ?: "(none)",
val ? "hi" : "lo");
} else {
u8 edge_det_reg;
u8 rise_reg;
u8 fall_reg;
u8 irqen_reg;
static const char * const edge_det_values[] = {
"edge-inactive",
"edge-asserted",
"not-supported"
};
static const char * const rise_values[] = {
"no-rising-edge-detection",
"rising-edge-detection",
"not-supported"
};
static const char * const fall_values[] = {
"no-falling-edge-detection",
"falling-edge-detection",
"not-supported"
};
#define NOT_SUPPORTED_IDX 2
u8 edge_det = NOT_SUPPORTED_IDX;
u8 rise = NOT_SUPPORTED_IDX;
u8 fall = NOT_SUPPORTED_IDX;
bool irqen;
switch (stmpe->partnum) {
case STMPE610:
case STMPE811:
case STMPE1601:
case STMPE2401:
case STMPE2403:
edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_LSB + bank];
ret = stmpe_reg_read(stmpe, edge_det_reg);
if (ret < 0)
return;
edge_det = !!(ret & mask);
fallthrough;
case STMPE1801:
rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank];
fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank];
ret = stmpe_reg_read(stmpe, rise_reg);
if (ret < 0)
return;
rise = !!(ret & mask);
ret = stmpe_reg_read(stmpe, fall_reg);
if (ret < 0)
return;
fall = !!(ret & mask);
fallthrough;
case STMPE801:
case STMPE1600:
irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank];
break;
default:
return;
}
ret = stmpe_reg_read(stmpe, irqen_reg);
if (ret < 0)
return;
irqen = !!(ret & mask);
seq_printf(s, " gpio-%-3d (%-20.20s) in %s %13s %13s %25s %25s",
gpio, label ?: "(none)",
val ? "hi" : "lo",
edge_det_values[edge_det],
irqen ? "IRQ-enabled" : "IRQ-disabled",
rise_values[rise],
fall_values[fall]);
}
}
static void stmpe_dbg_show(struct seq_file *s, struct gpio_chip *gc)
{
unsigned i;
unsigned gpio = gc->base;
for (i = 0; i < gc->ngpio; i++, gpio++) {
stmpe_dbg_show_one(s, gc, i, gpio);
seq_putc(s, '\n');
}
}
static struct irq_chip stmpe_gpio_irq_chip = {
.name = "stmpe-gpio",
.irq_bus_lock = stmpe_gpio_irq_lock,
.irq_bus_sync_unlock = stmpe_gpio_irq_sync_unlock,
.irq_mask = stmpe_gpio_irq_mask,
.irq_unmask = stmpe_gpio_irq_unmask,
.irq_set_type = stmpe_gpio_irq_set_type,
};
#define MAX_GPIOS 24
static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
{
struct stmpe_gpio *stmpe_gpio = dev;
struct stmpe *stmpe = stmpe_gpio->stmpe;
u8 statmsbreg;
int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8);
u8 status[DIV_ROUND_UP(MAX_GPIOS, 8)];
int ret;
int i;
/*
* the stmpe_block_read() call below, imposes to set statmsbreg
* with the register located at the lowest address. As STMPE1600
* variant is the only one which respect registers address's order
* (LSB regs located at lowest address than MSB ones) whereas all
* the others have a registers layout with MSB located before the
* LSB regs.
*/
if (stmpe->partnum == STMPE1600)
statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_LSB];
else
statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB];
ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status);
if (ret < 0)
return IRQ_NONE;
for (i = 0; i < num_banks; i++) {
int bank = (stmpe_gpio->stmpe->partnum == STMPE1600) ? i :
num_banks - i - 1;
unsigned int enabled = stmpe_gpio->regs[REG_IE][bank];
unsigned int stat = status[i];
stat &= enabled;
if (!stat)
continue;
while (stat) {
int bit = __ffs(stat);
int line = bank * 8 + bit;
int child_irq = irq_find_mapping(stmpe_gpio->chip.irq.domain,
line);
handle_nested_irq(child_irq);
stat &= ~BIT(bit);
}
/*
* interrupt status register write has no effect on
* 801/1801/1600, bits are cleared when read.
* Edge detect register is not present on 801/1600/1801
*/
if (stmpe->partnum != STMPE801 && stmpe->partnum != STMPE1600 &&
stmpe->partnum != STMPE1801) {
stmpe_reg_write(stmpe, statmsbreg + i, status[i]);
stmpe_reg_write(stmpe,
stmpe->regs[STMPE_IDX_GPEDR_MSB] + i,
status[i]);
}
}
return IRQ_HANDLED;
}
static void stmpe_init_irq_valid_mask(struct gpio_chip *gc,
unsigned long *valid_mask,
unsigned int ngpios)
{
struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc);
int i;
if (!stmpe_gpio->norequest_mask)
return;
/* Forbid unused lines to be mapped as IRQs */
for (i = 0; i < sizeof(u32); i++) {
if (stmpe_gpio->norequest_mask & BIT(i))
clear_bit(i, valid_mask);
}
}
static void stmpe_gpio_disable(void *stmpe)
{
stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
}
static int stmpe_gpio_probe(struct platform_device *pdev)
{
struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
struct device_node *np = pdev->dev.of_node;
struct stmpe_gpio *stmpe_gpio;
int ret, irq;
if (stmpe->num_gpios > MAX_GPIOS) {
dev_err(&pdev->dev, "Need to increase maximum GPIO number\n");
return -EINVAL;
}
stmpe_gpio = devm_kzalloc(&pdev->dev, sizeof(*stmpe_gpio), GFP_KERNEL);
if (!stmpe_gpio)
return -ENOMEM;
mutex_init(&stmpe_gpio->irq_lock);
stmpe_gpio->dev = &pdev->dev;
stmpe_gpio->stmpe = stmpe;
stmpe_gpio->chip = template_chip;
stmpe_gpio->chip.ngpio = stmpe->num_gpios;
stmpe_gpio->chip.parent = &pdev->dev;
stmpe_gpio->chip.base = -1;
if (IS_ENABLED(CONFIG_DEBUG_FS))
stmpe_gpio->chip.dbg_show = stmpe_dbg_show;
of_property_read_u32(np, "st,norequest-mask",
&stmpe_gpio->norequest_mask);
irq = platform_get_irq(pdev, 0);
if (irq < 0)
dev_info(&pdev->dev,
"device configured in no-irq mode: "
"irqs are not available\n");
ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
if (ret)
return ret;
ret = devm_add_action_or_reset(&pdev->dev, stmpe_gpio_disable, stmpe);
if (ret)
return ret;
if (irq > 0) {
struct gpio_irq_chip *girq;
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
stmpe_gpio_irq, IRQF_ONESHOT,
"stmpe-gpio", stmpe_gpio);
if (ret) {
dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
return ret;
}
girq = &stmpe_gpio->chip.irq;
girq->chip = &stmpe_gpio_irq_chip;
/* This will let us handle the parent IRQ in the driver */
girq->parent_handler = NULL;
girq->num_parents = 0;
girq->parents = NULL;
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_simple_irq;
girq->threaded = true;
girq->init_valid_mask = stmpe_init_irq_valid_mask;
}
return devm_gpiochip_add_data(&pdev->dev, &stmpe_gpio->chip, stmpe_gpio);
}
static struct platform_driver stmpe_gpio_driver = {
.driver = {
.suppress_bind_attrs = true,
.name = "stmpe-gpio",
},
.probe = stmpe_gpio_probe,
};
static int __init stmpe_gpio_init(void)
{
return platform_driver_register(&stmpe_gpio_driver);
}
subsys_initcall(stmpe_gpio_init);