linux/drivers/usb
Yoshihiro Shimoda b2f1eaaee5 usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CON
This driver should clear the bit. Otherwise, the VBUS will output
wrongly if the usb port on a board has VBUS output capability.

Fixes: 746bfe63bb ("usb: gadget: renesas_usb3: add support for
		      Renesas USB3.0 peripheral controller")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-05 13:39:23 +03:00
..
atm Use "foo *bar" instead of "foo * bar". 2016-04-28 12:57:49 -07:00
c67x00
chipidea usb: chipidea: udc: don't touch DP when controller is in host mode 2016-08-19 09:27:07 +08:00
class cdc-acm: fix wrong pipe type on rx interrupt xfers 2016-08-15 16:30:56 +02:00
common Merge 4.7-rc6 into usb-next 2016-07-04 08:19:21 -07:00
core USB: avoid left shift by -1 2016-08-23 16:35:20 -04:00
dwc2 usb: dwc2: Add reset control to dwc2 2016-08-22 10:45:11 +03:00
dwc3 Revert "usb: dwc3: gadget: always decrement by 1" 2016-09-05 13:39:23 +03:00
early usb: early/ehci-dbgp: make it explicitly non-modular 2016-06-26 11:48:18 -07:00
gadget usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CON 2016-09-05 13:39:23 +03:00
host xhci: don't dereference a xhci member after removing xhci 2016-08-16 09:42:47 +02:00
image usb: microtek: Use "foo *bar" instead of "foo * bar". 2016-06-07 22:18:39 -07:00
isp1760 usb: Remove unnecessary space before open square bracket. 2016-05-09 13:08:46 +02:00
misc usb: misc: usbtest: add fix for driver hang 2016-08-11 18:31:51 +02:00
mon usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock 2016-02-06 21:55:57 -08:00
musb usb: musb: Fix locking errors for host only mode 2016-08-30 14:11:38 +02:00
phy usb: phy: omap-otg: Fix missing platform_set_drvdata() in omap_otg_probe() 2016-08-11 15:09:45 +03:00
renesas_usbhs usb: renesas_usbhs: gadget: fix return value check in usbhs_mod_gadget_probe() 2016-08-22 10:45:11 +03:00
serial USB: serial: option: add WeTelecom 0x6802 and 0x6803 products 2016-08-24 14:13:40 +02:00
storage USB: uas: Fix slave queue_depth not being set 2016-06-01 14:56:24 -07:00
usbip Merge 4.7-rc4 into usb-next 2016-06-20 07:40:51 -07:00
wusbcore usb: wusbcore: Do not initialise statics to 0. 2016-05-09 13:08:46 +02:00
Kconfig usb: common: rework CONFIG_USB_COMMON logic 2016-04-18 15:23:36 +03:00
Makefile usb: fsl: drop USB_FSL_MPH_DR_OF Kconfig symbol 2016-03-04 15:14:29 +02:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.