linux/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
Scott Branden 23a71fd616 dt-bindings: brcm: rationalize Broadcom documentation naming
This patchset attempts to standardize the naming of dt-bindings
documents based on the Broadcom vendor prefix of brcm.

Although there are no guidelines currently present for how to name
the dt-bindings document the "vendor,binding.txt" style is in use by
some of the other vendors.

Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2015-03-26 12:14:11 -05:00

31 lines
575 B
Plaintext

* BCM63xx UART
Required properties:
- compatible: "brcm,bcm6345-uart"
- reg: The base address of the UART register bank.
- interrupts: A single interrupt specifier.
- clocks: Clock driving the hardware; used to figure out the baud rate
divisor.
Example:
uart0: serial@14e00520 {
compatible = "brcm,bcm6345-uart";
reg = <0x14e00520 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <2>;
clocks = <&periph_clk>;
};
clocks {
periph_clk: periph_clk@0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <54000000>;
};
};