linux/drivers/usb/phy/phy-mv-u3d-usb.h
Felipe Balbi 94ae98433a usb: phy: rename all phy drivers to phy-$name-usb.c
this will make sure that we have sensible names
for all phy drivers. Current situation was already
quite bad with too generic names being used.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:18:08 +02:00

106 lines
3.9 KiB
C

/*
* Copyright (C) 2011 Marvell International Ltd. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*/
#ifndef __MV_U3D_PHY_H
#define __MV_U3D_PHY_H
#define USB3_POWER_PLL_CONTROL 0x1
#define USB3_KVCO_CALI_CONTROL 0x2
#define USB3_IMPEDANCE_CALI_CTRL 0x3
#define USB3_IMPEDANCE_TX_SSC 0x4
#define USB3_SQUELCH_FFE 0x6
#define USB3_GEN1_SET0 0xD
#define USB3_GEN2_SET0 0xF
#define USB3_GEN2_SET1 0x10
#define USB3_DIGITAL_LOOPBACK_EN 0x23
#define USB3_PHY_ISOLATION_MODE 0x26
#define USB3_TXDETRX 0x48
#define USB3_TX_EMPPH 0x5E
#define USB3_RESET_CONTROL 0x90
#define USB3_PIPE_SM_CTRL 0x91
#define USB3_RESET_CONTROL_RESET_PIPE 0x1
#define USB3_RESET_CONTROL_RESET_PHY 0x2
#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK (0x1F << 0)
#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT 0
#define USB3_PLL_25MHZ 0x2
#define USB3_PLL_26MHZ 0x5
#define USB3_POWER_PLL_CONTROL_PHY_MODE_MASK (0x7 << 5)
#define USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT 5
#define USB3_POWER_PLL_CONTROL_PU_MASK (0xF << 12)
#define USB3_POWER_PLL_CONTROL_PU_SHIFT 12
#define USB3_POWER_PLL_CONTROL_PU (0xF << 12)
#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK (0x1 << 12)
#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_SHIFT 12
#define USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT 14
#define USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT 15
#define USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK 0xF
#define USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT 0
#define USB3_SQUELCH_FFE_FFE_RES_SEL_MASK (0x7 << 4)
#define USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT 4
#define USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK (0x1F << 8)
#define USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT 8
#define USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK (0x1 << 15)
#define USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT 11
#define USB3_GEN2_SET0_G2_TX_AMP_MASK (0x1F << 1)
#define USB3_GEN2_SET0_G2_TX_AMP_SHIFT 1
#define USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT 6
#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK (0xF << 7)
#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT 7
#define USB3_GEN2_SET0_G2_TX_EMPH_EN_MASK (0x1 << 11)
#define USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT 11
#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK (0x1 << 15)
#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_SHIFT 15
#define USB3_GEN2_SET1_G2_RX_SELMUPI_MASK (0x7 << 0)
#define USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT 0
#define USB3_GEN2_SET1_G2_RX_SELMUPF_MASK (0x7 << 3)
#define USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT 3
#define USB3_GEN2_SET1_G2_RX_SELMUFI_MASK (0x3 << 6)
#define USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT 6
#define USB3_GEN2_SET1_G2_RX_SELMUFF_MASK (0x3 << 8)
#define USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT 8
#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK (0x3 << 10)
#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT 10
#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK (0x7 << 12)
#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT 12
#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK (0x3F << 0)
#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT 0
#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK 0xF
#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT 0
#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK (0xF << 4)
#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT 4
#define USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK (0x1 << 8)
#define USB3_TXDETRX_VTHSEL_MASK (0x3 << 4)
#define USB3_TXDETRX_VTHSEL_SHIFT 4
#define USB3_TX_EMPPH_AMP_MASK (0xF << 0)
#define USB3_TX_EMPPH_AMP_SHIFT 0
#define USB3_TX_EMPPH_EN_MASK (0x1 << 6)
#define USB3_TX_EMPPH_EN_SHIFT 6
#define USB3_TX_EMPPH_AMP_FORCE_MASK (0x1 << 7)
#define USB3_TX_EMPPH_AMP_FORCE_SHIFT 7
#define USB3_TX_EMPPH_PAR1_MASK (0x1F << 8)
#define USB3_TX_EMPPH_PAR1_SHIFT 8
#define USB3_TX_EMPPH_PAR2_MASK (0x1 << 13)
#define USB3_TX_EMPPH_PAR2_SHIFT 13
#define USB3_PIPE_SM_CTRL_PHY_INIT_DONE 15
#endif /* __MV_U3D_PHY_H */