linux/arch/m68k/include/asm/mcfpit.h
Greg Ungerer f317c71a2f m68knommu: move ColdFire PIT timer base addresses
The PIT hardware timer module used in some ColdFire CPU's is not always
addressed relative to an IPSBAR register. Parts like the ColdFire 5207 and
5208 have fixed peripheral addresses. So lets not define the register
addresses of the PIT relative to an IPSBAR definition. Move the base
address definitions into the per-part headers. This is a lot more consistent
since all the other peripheral base addresses are defined in the per-part
header files already.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:54 +10:00

51 lines
2.2 KiB
C

/****************************************************************************/
/*
* mcfpit.h -- ColdFire internal PIT timer support defines.
*
* (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
*/
/****************************************************************************/
#ifndef mcfpit_h
#define mcfpit_h
/****************************************************************************/
/*
* Define the PIT timer register address offsets.
*/
#define MCFPIT_PCSR 0x0 /* PIT control register */
#define MCFPIT_PMR 0x2 /* PIT modulus register */
#define MCFPIT_PCNTR 0x4 /* PIT count register */
/*
* Bit definitions for the PIT Control and Status register.
*/
#define MCFPIT_PCSR_CLK1 0x0000 /* System clock divisor */
#define MCFPIT_PCSR_CLK2 0x0100 /* System clock divisor */
#define MCFPIT_PCSR_CLK4 0x0200 /* System clock divisor */
#define MCFPIT_PCSR_CLK8 0x0300 /* System clock divisor */
#define MCFPIT_PCSR_CLK16 0x0400 /* System clock divisor */
#define MCFPIT_PCSR_CLK32 0x0500 /* System clock divisor */
#define MCFPIT_PCSR_CLK64 0x0600 /* System clock divisor */
#define MCFPIT_PCSR_CLK128 0x0700 /* System clock divisor */
#define MCFPIT_PCSR_CLK256 0x0800 /* System clock divisor */
#define MCFPIT_PCSR_CLK512 0x0900 /* System clock divisor */
#define MCFPIT_PCSR_CLK1024 0x0a00 /* System clock divisor */
#define MCFPIT_PCSR_CLK2048 0x0b00 /* System clock divisor */
#define MCFPIT_PCSR_CLK4096 0x0c00 /* System clock divisor */
#define MCFPIT_PCSR_CLK8192 0x0d00 /* System clock divisor */
#define MCFPIT_PCSR_CLK16384 0x0e00 /* System clock divisor */
#define MCFPIT_PCSR_CLK32768 0x0f00 /* System clock divisor */
#define MCFPIT_PCSR_DOZE 0x0040 /* Clock run in doze mode */
#define MCFPIT_PCSR_HALTED 0x0020 /* Clock run in halt mode */
#define MCFPIT_PCSR_OVW 0x0010 /* Overwrite PIT counter now */
#define MCFPIT_PCSR_PIE 0x0008 /* Enable PIT interrupt */
#define MCFPIT_PCSR_PIF 0x0004 /* PIT interrupt flag */
#define MCFPIT_PCSR_RLD 0x0002 /* Reload counter */
#define MCFPIT_PCSR_EN 0x0001 /* Enable PIT */
#define MCFPIT_PCSR_DISABLE 0x0000 /* Disable PIT */
/****************************************************************************/
#endif /* mcfpit_h */