linux/arch/x86/kernel/ftrace.c
Frederic Weisbecker 380c4b1411 tracing/function-graph-tracer: append the tracing_graph_flag
Impact: Provide a way to pause the function graph tracer

As suggested by Steven Rostedt, the previous patch that prevented from
spinlock function tracing shouldn't use the raw_spinlock to fix it.
It's much better to follow lockdep with normal spinlock, so this patch
adds a new flag for each task to make the function graph tracer able
to be paused. We also can send an ftrace_printk whithout worrying of
the irrelevant traced spinlock during insertion.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 15:11:45 +01:00

538 lines
13 KiB
C

/*
* Code for replacing ftrace calls with jumps.
*
* Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
*
* Thanks goes to Ingo Molnar, for suggesting the idea.
* Mathieu Desnoyers, for suggesting postponing the modifications.
* Arjan van de Ven, for keeping me straight, and explaining to me
* the dangers of modifying code on the run.
*/
#include <linux/spinlock.h>
#include <linux/hardirq.h>
#include <linux/uaccess.h>
#include <linux/ftrace.h>
#include <linux/percpu.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/list.h>
#include <asm/ftrace.h>
#include <linux/ftrace.h>
#include <asm/nops.h>
#include <asm/nmi.h>
#ifdef CONFIG_DYNAMIC_FTRACE
union ftrace_code_union {
char code[MCOUNT_INSN_SIZE];
struct {
char e8;
int offset;
} __attribute__((packed));
};
static int ftrace_calc_offset(long ip, long addr)
{
return (int)(addr - ip);
}
static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
{
static union ftrace_code_union calc;
calc.e8 = 0xe8;
calc.offset = ftrace_calc_offset(ip + MCOUNT_INSN_SIZE, addr);
/*
* No locking needed, this must be called via kstop_machine
* which in essence is like running on a uniprocessor machine.
*/
return calc.code;
}
/*
* Modifying code must take extra care. On an SMP machine, if
* the code being modified is also being executed on another CPU
* that CPU will have undefined results and possibly take a GPF.
* We use kstop_machine to stop other CPUS from exectuing code.
* But this does not stop NMIs from happening. We still need
* to protect against that. We separate out the modification of
* the code to take care of this.
*
* Two buffers are added: An IP buffer and a "code" buffer.
*
* 1) Put the instruction pointer into the IP buffer
* and the new code into the "code" buffer.
* 2) Set a flag that says we are modifying code
* 3) Wait for any running NMIs to finish.
* 4) Write the code
* 5) clear the flag.
* 6) Wait for any running NMIs to finish.
*
* If an NMI is executed, the first thing it does is to call
* "ftrace_nmi_enter". This will check if the flag is set to write
* and if it is, it will write what is in the IP and "code" buffers.
*
* The trick is, it does not matter if everyone is writing the same
* content to the code location. Also, if a CPU is executing code
* it is OK to write to that code location if the contents being written
* are the same as what exists.
*/
static atomic_t in_nmi = ATOMIC_INIT(0);
static int mod_code_status; /* holds return value of text write */
static int mod_code_write; /* set when NMI should do the write */
static void *mod_code_ip; /* holds the IP to write to */
static void *mod_code_newcode; /* holds the text to write to the IP */
static unsigned nmi_wait_count;
static atomic_t nmi_update_count = ATOMIC_INIT(0);
int ftrace_arch_read_dyn_info(char *buf, int size)
{
int r;
r = snprintf(buf, size, "%u %u",
nmi_wait_count,
atomic_read(&nmi_update_count));
return r;
}
static void ftrace_mod_code(void)
{
/*
* Yes, more than one CPU process can be writing to mod_code_status.
* (and the code itself)
* But if one were to fail, then they all should, and if one were
* to succeed, then they all should.
*/
mod_code_status = probe_kernel_write(mod_code_ip, mod_code_newcode,
MCOUNT_INSN_SIZE);
}
void ftrace_nmi_enter(void)
{
atomic_inc(&in_nmi);
/* Must have in_nmi seen before reading write flag */
smp_mb();
if (mod_code_write) {
ftrace_mod_code();
atomic_inc(&nmi_update_count);
}
}
void ftrace_nmi_exit(void)
{
/* Finish all executions before clearing in_nmi */
smp_wmb();
atomic_dec(&in_nmi);
}
static void wait_for_nmi(void)
{
int waited = 0;
while (atomic_read(&in_nmi)) {
waited = 1;
cpu_relax();
}
if (waited)
nmi_wait_count++;
}
static int
do_ftrace_mod_code(unsigned long ip, void *new_code)
{
mod_code_ip = (void *)ip;
mod_code_newcode = new_code;
/* The buffers need to be visible before we let NMIs write them */
smp_wmb();
mod_code_write = 1;
/* Make sure write bit is visible before we wait on NMIs */
smp_mb();
wait_for_nmi();
/* Make sure all running NMIs have finished before we write the code */
smp_mb();
ftrace_mod_code();
/* Make sure the write happens before clearing the bit */
smp_wmb();
mod_code_write = 0;
/* make sure NMIs see the cleared bit */
smp_mb();
wait_for_nmi();
return mod_code_status;
}
static unsigned char ftrace_nop[MCOUNT_INSN_SIZE];
static unsigned char *ftrace_nop_replace(void)
{
return ftrace_nop;
}
static int
ftrace_modify_code(unsigned long ip, unsigned char *old_code,
unsigned char *new_code)
{
unsigned char replaced[MCOUNT_INSN_SIZE];
/*
* Note: Due to modules and __init, code can
* disappear and change, we need to protect against faulting
* as well as code changing. We do this by using the
* probe_kernel_* functions.
*
* No real locking needed, this code is run through
* kstop_machine, or before SMP starts.
*/
/* read the text we want to modify */
if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
return -EFAULT;
/* Make sure it is what we expect it to be */
if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0)
return -EINVAL;
/* replace the text with the new text */
if (do_ftrace_mod_code(ip, new_code))
return -EPERM;
sync_core();
return 0;
}
int ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
unsigned char *new, *old;
unsigned long ip = rec->ip;
old = ftrace_call_replace(ip, addr);
new = ftrace_nop_replace();
return ftrace_modify_code(rec->ip, old, new);
}
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned char *new, *old;
unsigned long ip = rec->ip;
old = ftrace_nop_replace();
new = ftrace_call_replace(ip, addr);
return ftrace_modify_code(rec->ip, old, new);
}
int ftrace_update_ftrace_func(ftrace_func_t func)
{
unsigned long ip = (unsigned long)(&ftrace_call);
unsigned char old[MCOUNT_INSN_SIZE], *new;
int ret;
memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE);
new = ftrace_call_replace(ip, (unsigned long)func);
ret = ftrace_modify_code(ip, old, new);
return ret;
}
int __init ftrace_dyn_arch_init(void *data)
{
extern const unsigned char ftrace_test_p6nop[];
extern const unsigned char ftrace_test_nop5[];
extern const unsigned char ftrace_test_jmp[];
int faulted = 0;
/*
* There is no good nop for all x86 archs.
* We will default to using the P6_NOP5, but first we
* will test to make sure that the nop will actually
* work on this CPU. If it faults, we will then
* go to a lesser efficient 5 byte nop. If that fails
* we then just use a jmp as our nop. This isn't the most
* efficient nop, but we can not use a multi part nop
* since we would then risk being preempted in the middle
* of that nop, and if we enabled tracing then, it might
* cause a system crash.
*
* TODO: check the cpuid to determine the best nop.
*/
asm volatile (
"ftrace_test_jmp:"
"jmp ftrace_test_p6nop\n"
"nop\n"
"nop\n"
"nop\n" /* 2 byte jmp + 3 bytes */
"ftrace_test_p6nop:"
P6_NOP5
"jmp 1f\n"
"ftrace_test_nop5:"
".byte 0x66,0x66,0x66,0x66,0x90\n"
"1:"
".section .fixup, \"ax\"\n"
"2: movl $1, %0\n"
" jmp ftrace_test_nop5\n"
"3: movl $2, %0\n"
" jmp 1b\n"
".previous\n"
_ASM_EXTABLE(ftrace_test_p6nop, 2b)
_ASM_EXTABLE(ftrace_test_nop5, 3b)
: "=r"(faulted) : "0" (faulted));
switch (faulted) {
case 0:
pr_info("ftrace: converting mcount calls to 0f 1f 44 00 00\n");
memcpy(ftrace_nop, ftrace_test_p6nop, MCOUNT_INSN_SIZE);
break;
case 1:
pr_info("ftrace: converting mcount calls to 66 66 66 66 90\n");
memcpy(ftrace_nop, ftrace_test_nop5, MCOUNT_INSN_SIZE);
break;
case 2:
pr_info("ftrace: converting mcount calls to jmp . + 5\n");
memcpy(ftrace_nop, ftrace_test_jmp, MCOUNT_INSN_SIZE);
break;
}
/* The return code is retured via data */
*(unsigned long *)data = 0;
return 0;
}
#endif
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
extern void ftrace_graph_call(void);
static int ftrace_mod_jmp(unsigned long ip,
int old_offset, int new_offset)
{
unsigned char code[MCOUNT_INSN_SIZE];
if (probe_kernel_read(code, (void *)ip, MCOUNT_INSN_SIZE))
return -EFAULT;
if (code[0] != 0xe9 || old_offset != *(int *)(&code[1]))
return -EINVAL;
*(int *)(&code[1]) = new_offset;
if (do_ftrace_mod_code(ip, &code))
return -EPERM;
return 0;
}
int ftrace_enable_ftrace_graph_caller(void)
{
unsigned long ip = (unsigned long)(&ftrace_graph_call);
int old_offset, new_offset;
old_offset = (unsigned long)(&ftrace_stub) - (ip + MCOUNT_INSN_SIZE);
new_offset = (unsigned long)(&ftrace_graph_caller) - (ip + MCOUNT_INSN_SIZE);
return ftrace_mod_jmp(ip, old_offset, new_offset);
}
int ftrace_disable_ftrace_graph_caller(void)
{
unsigned long ip = (unsigned long)(&ftrace_graph_call);
int old_offset, new_offset;
old_offset = (unsigned long)(&ftrace_graph_caller) - (ip + MCOUNT_INSN_SIZE);
new_offset = (unsigned long)(&ftrace_stub) - (ip + MCOUNT_INSN_SIZE);
return ftrace_mod_jmp(ip, old_offset, new_offset);
}
#else /* CONFIG_DYNAMIC_FTRACE */
/*
* These functions are picked from those used on
* this page for dynamic ftrace. They have been
* simplified to ignore all traces in NMI context.
*/
static atomic_t in_nmi;
void ftrace_nmi_enter(void)
{
atomic_inc(&in_nmi);
}
void ftrace_nmi_exit(void)
{
atomic_dec(&in_nmi);
}
#endif /* !CONFIG_DYNAMIC_FTRACE */
/* Add a function return address to the trace stack on thread info.*/
static int push_return_trace(unsigned long ret, unsigned long long time,
unsigned long func, int *depth)
{
int index;
if (!current->ret_stack)
return -EBUSY;
/* The return trace stack is full */
if (current->curr_ret_stack == FTRACE_RETFUNC_DEPTH - 1) {
atomic_inc(&current->trace_overrun);
return -EBUSY;
}
index = ++current->curr_ret_stack;
barrier();
current->ret_stack[index].ret = ret;
current->ret_stack[index].func = func;
current->ret_stack[index].calltime = time;
*depth = index;
return 0;
}
/* Retrieve a function return address to the trace stack on thread info.*/
static void pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret)
{
int index;
index = current->curr_ret_stack;
if (unlikely(index < 0)) {
ftrace_graph_stop();
WARN_ON(1);
/* Might as well panic, otherwise we have no where to go */
*ret = (unsigned long)panic;
return;
}
*ret = current->ret_stack[index].ret;
trace->func = current->ret_stack[index].func;
trace->calltime = current->ret_stack[index].calltime;
trace->overrun = atomic_read(&current->trace_overrun);
trace->depth = index;
barrier();
current->curr_ret_stack--;
}
/*
* Send the trace to the ring-buffer.
* @return the original return address.
*/
unsigned long ftrace_return_to_handler(void)
{
struct ftrace_graph_ret trace;
unsigned long ret;
pop_return_trace(&trace, &ret);
trace.rettime = cpu_clock(raw_smp_processor_id());
ftrace_graph_return(&trace);
if (unlikely(!ret)) {
ftrace_graph_stop();
WARN_ON(1);
/* Might as well panic. What else to do? */
ret = (unsigned long)panic;
}
return ret;
}
/*
* Hook the return address and push it in the stack of return addrs
* in current thread info.
*/
void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
{
unsigned long old;
unsigned long long calltime;
int faulted;
struct ftrace_graph_ent trace;
unsigned long return_hooker = (unsigned long)
&return_to_handler;
/* Nmi's are currently unsupported */
if (unlikely(atomic_read(&in_nmi)))
return;
if (unlikely(atomic_read(&current->tracing_graph_pause)))
return;
/*
* Protect against fault, even if it shouldn't
* happen. This tool is too much intrusive to
* ignore such a protection.
*/
asm volatile(
"1: " _ASM_MOV " (%[parent_old]), %[old]\n"
"2: " _ASM_MOV " %[return_hooker], (%[parent_replaced])\n"
" movl $0, %[faulted]\n"
".section .fixup, \"ax\"\n"
"3: movl $1, %[faulted]\n"
".previous\n"
_ASM_EXTABLE(1b, 3b)
_ASM_EXTABLE(2b, 3b)
: [parent_replaced] "=r" (parent), [old] "=r" (old),
[faulted] "=r" (faulted)
: [parent_old] "0" (parent), [return_hooker] "r" (return_hooker)
: "memory"
);
if (unlikely(faulted)) {
ftrace_graph_stop();
WARN_ON(1);
return;
}
if (unlikely(!__kernel_text_address(old))) {
ftrace_graph_stop();
*parent = old;
WARN_ON(1);
return;
}
calltime = cpu_clock(raw_smp_processor_id());
if (push_return_trace(old, calltime,
self_addr, &trace.depth) == -EBUSY) {
*parent = old;
return;
}
trace.func = self_addr;
/* Only trace if the calling function expects to */
if (!ftrace_graph_entry(&trace)) {
current->curr_ret_stack--;
*parent = old;
}
}
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */