linux/drivers/cpufreq/pmac32-cpufreq.c
Linus Torvalds c04a588029 powerpc updates for 4.7
Highlights:
  - Support for Power ISA 3.0 (Power9) Radix Tree MMU from Aneesh Kumar K.V
  - Live patching support for ppc64le (also merged via livepatching.git)
 
 Various cleanups & minor fixes from:
  - Aaro Koskinen, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
    Chris Smart, Daniel Axtens, Frederic Barrat, Gavin Shan, Ian Munsie, Lennart
    Sorensen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Michael
    Ellerman, Oliver O'Halloran, Paul Gortmaker, Paul Mackerras, Rashmica Gupta,
    Russell Currey, Suraj Jitindar Singh, Thiago Jung Bauermann, Valentin
    Rothberg, Vipin K Parashar.
 
 General:
  - Update LMB associativity index during DLPAR add/remove from Nathan Fontenot
  - Fix branching to OOL handlers in relocatable kernel from Hari Bathini
  - Add support for userspace Power9 copy/paste from Chris Smart
  - Always use STRICT_MM_TYPECHECKS from Michael Ellerman
  - Add mask of possible MMU features from Michael Ellerman
 
 PCI:
  - Enable pass through of NVLink to guests from Alexey Kardashevskiy
  - Cleanups in preparation for powernv PCI hotplug from Gavin Shan
  - Don't report error in eeh_pe_reset_and_recover() from Gavin Shan
  - Restore initial state in eeh_pe_reset_and_recover() from Gavin Shan
  - Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell" from Guilherme G. Piccoli
  - Remove the dependency on EEH struct in DDW mechanism from Guilherme G. Piccoli
 
 selftests:
  - Test cp_abort during context switch from Chris Smart
  - Add several tests for transactional memory support from Rashmica Gupta
 
 perf:
  - Add support for sampling interrupt register state from Anju T
  - Add support for unwinding perf-stackdump from Chandan Kumar
 
 cxl:
  - Configure the PSL for two CAPI ports on POWER8NVL from Philippe Bergheaud
  - Allow initialization on timebase sync failures from Frederic Barrat
  - Increase timeout for detection of AFU mmio hang from Frederic Barrat
  - Handle num_of_processes larger than can fit in the SPA from Ian Munsie
  - Ensure PSL interrupt is configured for contexts with no AFU IRQs from Ian Munsie
  - Add kernel API to allow a context to operate with relocate disabled from Ian Munsie
  - Check periodically the coherent platform function's state from Christophe Lombard
 
 Freescale:
  - Updates from Scott: "Contains 86xx fixes, minor device tree fixes, an erratum
    workaround, and a kconfig dependency fix."
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXPsGzAAoJEFHr6jzI4aWAVoAP/iKdrDe0eYHlVAE9SqnbsiZs
 lgDxdsC8P3fsmP1G9o/HkKhC82zHl/La8Ztz8dtqa+LkSzbfliWP1ztJsI7GsBFo
 tyCKzWnX9Rwvd3meHu/o/SQ29TNLm/PbPyyRqpj5QPbJ8XCXkAXR7ZZZqjvcMsJW
 /AgIr7Cgf53tl9oZzzl/c7CnNHhMq+NBdA71vhWtUx+T97wfJEGyKW6HhZyHDbEU
 iAki7fu77ZpEqC/Fh9swf0dCGBJ+a132NoMVo0AdV7EQLznUYlQpQEqa+1PyHZOP
 /ArOzf2mDg6m3PfCo1eiB07v8PnVZ3llEUbVAJNg3GUxbE4SHrqq/kwm0iElm3p/
 DvFxerCwdX9vmskJX4wDs+pSZRabXYj9XVMptsgFzA4joWrqqb7mBHqaort88YcY
 YSljEt1bHyXmiJ+dBya40qARsWUkCVN7ZgEzdxckq0KI3w7g2tqpqIbO2lClWT6t
 B3GpqQ4jp34+d1M14FB91fIGK7tMvOhSInE0Mv9+tPvRsepXqiiU/SwdAtRlr3m2
 zs/K+4FYcVjJ3Rmpgc+tI38PbZxHe212I35YN6L1LP+4ZfAtzz0NyKdooTIBtkbO
 19pX4WbBjKq8zK+YutrySncBIrbnI6VjW51vtRhgVKZliPFO/6zKagyU6FbxM+E5
 udQES+t3F/9gvtxgxtDe
 =YvyQ
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights:
   - Support for Power ISA 3.0 (Power9) Radix Tree MMU from Aneesh Kumar K.V
   - Live patching support for ppc64le (also merged via livepatching.git)

  Various cleanups & minor fixes from:
   - Aaro Koskinen, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
     Chris Smart, Daniel Axtens, Frederic Barrat, Gavin Shan, Ian Munsie,
     Lennart Sorensen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring,
     Michael Ellerman, Oliver O'Halloran, Paul Gortmaker, Paul Mackerras,
     Rashmica Gupta, Russell Currey, Suraj Jitindar Singh, Thiago Jung
     Bauermann, Valentin Rothberg, Vipin K Parashar.

  General:
   - Update LMB associativity index during DLPAR add/remove from Nathan
     Fontenot
   - Fix branching to OOL handlers in relocatable kernel from Hari Bathini
   - Add support for userspace Power9 copy/paste from Chris Smart
   - Always use STRICT_MM_TYPECHECKS from Michael Ellerman
   - Add mask of possible MMU features from Michael Ellerman

  PCI:
   - Enable pass through of NVLink to guests from Alexey Kardashevskiy
   - Cleanups in preparation for powernv PCI hotplug from Gavin Shan
   - Don't report error in eeh_pe_reset_and_recover() from Gavin Shan
   - Restore initial state in eeh_pe_reset_and_recover() from Gavin Shan
   - Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell"
     from Guilherme G Piccoli
   - Remove the dependency on EEH struct in DDW mechanism from Guilherme
     G Piccoli

  selftests:
   - Test cp_abort during context switch from Chris Smart
   - Add several tests for transactional memory support from Rashmica
     Gupta

  perf:
   - Add support for sampling interrupt register state from Anju T
   - Add support for unwinding perf-stackdump from Chandan Kumar

  cxl:
   - Configure the PSL for two CAPI ports on POWER8NVL from Philippe
     Bergheaud
   - Allow initialization on timebase sync failures from Frederic Barrat
   - Increase timeout for detection of AFU mmio hang from Frederic
     Barrat
   - Handle num_of_processes larger than can fit in the SPA from Ian
     Munsie
   - Ensure PSL interrupt is configured for contexts with no AFU IRQs
     from Ian Munsie
   - Add kernel API to allow a context to operate with relocate disabled
     from Ian Munsie
   - Check periodically the coherent platform function's state from
     Christophe Lombard

  Freescale:
   - Updates from Scott: "Contains 86xx fixes, minor device tree fixes,
     an erratum workaround, and a kconfig dependency fix."

* tag 'powerpc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (192 commits)
  powerpc/86xx: Fix PCI interrupt map definition
  powerpc/86xx: Move pci1 definition to the include file
  powerpc/fsl: Fix build of the dtb embedded kernel images
  powerpc/fsl: Fix rcpm compatible string
  powerpc/fsl: Remove FSL_SOC dependency from FSL_LBC
  powerpc/fsl-pci: Add a workaround for PCI 5 errata
  powerpc/fsl: Fix SPI compatible on t208xrdb and t1040rdb
  powerpc/powernv/npu: Add PE to PHB's list
  powerpc/powernv: Fix insufficient memory allocation
  powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism
  Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell"
  powerpc/eeh: Drop unnecessary label in eeh_pe_change_owner()
  powerpc/eeh: Ignore handlers in eeh_pe_reset_and_recover()
  powerpc/eeh: Restore initial state in eeh_pe_reset_and_recover()
  powerpc/eeh: Don't report error in eeh_pe_reset_and_recover()
  Revert "powerpc/powernv: Exclude root bus in pnv_pci_reset_secondary_bus()"
  powerpc/powernv/npu: Enable NVLink pass through
  powerpc/powernv/npu: Rework TCE Kill handling
  powerpc/powernv/npu: Add set/unset window helpers
  powerpc/powernv/ioda2: Export debug helper pe_level_printk()
  ...
2016-05-20 10:12:41 -07:00

689 lines
18 KiB
C

/*
* Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Copyright (C) 2004 John Steele Scott <toojays@toojays.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* TODO: Need a big cleanup here. Basically, we need to have different
* cpufreq_driver structures for the different type of HW instead of the
* current mess. We also need to better deal with the detection of the
* type of machine.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <linux/cpufreq.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/hardirq.h>
#include <linux/of_device.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/irq.h>
#include <asm/pmac_feature.h>
#include <asm/mmu_context.h>
#include <asm/sections.h>
#include <asm/cputable.h>
#include <asm/time.h>
#include <asm/mpic.h>
#include <asm/keylargo.h>
#include <asm/switch_to.h>
/* WARNING !!! This will cause calibrate_delay() to be called,
* but this is an __init function ! So you MUST go edit
* init/main.c to make it non-init before enabling DEBUG_FREQ
*/
#undef DEBUG_FREQ
extern void low_choose_7447a_dfs(int dfs);
extern void low_choose_750fx_pll(int pll);
extern void low_sleep_handler(void);
/*
* Currently, PowerMac cpufreq supports only high & low frequencies
* that are set by the firmware
*/
static unsigned int low_freq;
static unsigned int hi_freq;
static unsigned int cur_freq;
static unsigned int sleep_freq;
static unsigned long transition_latency;
/*
* Different models uses different mechanisms to switch the frequency
*/
static int (*set_speed_proc)(int low_speed);
static unsigned int (*get_speed_proc)(void);
/*
* Some definitions used by the various speedprocs
*/
static u32 voltage_gpio;
static u32 frequency_gpio;
static u32 slew_done_gpio;
static int no_schedule;
static int has_cpu_l2lve;
static int is_pmu_based;
/* There are only two frequency states for each processor. Values
* are in kHz for the time being.
*/
#define CPUFREQ_HIGH 0
#define CPUFREQ_LOW 1
static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
{0, CPUFREQ_HIGH, 0},
{0, CPUFREQ_LOW, 0},
{0, 0, CPUFREQ_TABLE_END},
};
static inline void local_delay(unsigned long ms)
{
if (no_schedule)
mdelay(ms);
else
msleep(ms);
}
#ifdef DEBUG_FREQ
static inline void debug_calc_bogomips(void)
{
/* This will cause a recalc of bogomips and display the
* result. We backup/restore the value to avoid affecting the
* core cpufreq framework's own calculation.
*/
unsigned long save_lpj = loops_per_jiffy;
calibrate_delay();
loops_per_jiffy = save_lpj;
}
#endif /* DEBUG_FREQ */
/* Switch CPU speed under 750FX CPU control
*/
static int cpu_750fx_cpu_speed(int low_speed)
{
u32 hid2;
if (low_speed == 0) {
/* ramping up, set voltage first */
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
/* Make sure we sleep for at least 1ms */
local_delay(10);
/* tweak L2 for high voltage */
if (has_cpu_l2lve) {
hid2 = mfspr(SPRN_HID2);
hid2 &= ~0x2000;
mtspr(SPRN_HID2, hid2);
}
}
#ifdef CONFIG_6xx
low_choose_750fx_pll(low_speed);
#endif
if (low_speed == 1) {
/* tweak L2 for low voltage */
if (has_cpu_l2lve) {
hid2 = mfspr(SPRN_HID2);
hid2 |= 0x2000;
mtspr(SPRN_HID2, hid2);
}
/* ramping down, set voltage last */
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
local_delay(10);
}
return 0;
}
static unsigned int cpu_750fx_get_cpu_speed(void)
{
if (mfspr(SPRN_HID1) & HID1_PS)
return low_freq;
else
return hi_freq;
}
/* Switch CPU speed using DFS */
static int dfs_set_cpu_speed(int low_speed)
{
if (low_speed == 0) {
/* ramping up, set voltage first */
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
/* Make sure we sleep for at least 1ms */
local_delay(1);
}
/* set frequency */
#ifdef CONFIG_6xx
low_choose_7447a_dfs(low_speed);
#endif
udelay(100);
if (low_speed == 1) {
/* ramping down, set voltage last */
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
local_delay(1);
}
return 0;
}
static unsigned int dfs_get_cpu_speed(void)
{
if (mfspr(SPRN_HID1) & HID1_DFS)
return low_freq;
else
return hi_freq;
}
/* Switch CPU speed using slewing GPIOs
*/
static int gpios_set_cpu_speed(int low_speed)
{
int gpio, timeout = 0;
/* If ramping up, set voltage first */
if (low_speed == 0) {
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
/* Delay is way too big but it's ok, we schedule */
local_delay(10);
}
/* Set frequency */
gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
if (low_speed == ((gpio & 0x01) == 0))
goto skip;
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio,
low_speed ? 0x04 : 0x05);
udelay(200);
do {
if (++timeout > 100)
break;
local_delay(1);
gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0);
} while((gpio & 0x02) == 0);
skip:
/* If ramping down, set voltage last */
if (low_speed == 1) {
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
/* Delay is way too big but it's ok, we schedule */
local_delay(10);
}
#ifdef DEBUG_FREQ
debug_calc_bogomips();
#endif
return 0;
}
/* Switch CPU speed under PMU control
*/
static int pmu_set_cpu_speed(int low_speed)
{
struct adb_request req;
unsigned long save_l2cr;
unsigned long save_l3cr;
unsigned int pic_prio;
unsigned long flags;
preempt_disable();
#ifdef DEBUG_FREQ
printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
#endif
pmu_suspend();
/* Disable all interrupt sources on openpic */
pic_prio = mpic_cpu_get_priority();
mpic_cpu_set_priority(0xf);
/* Make sure the decrementer won't interrupt us */
asm volatile("mtdec %0" : : "r" (0x7fffffff));
/* Make sure any pending DEC interrupt occurring while we did
* the above didn't re-enable the DEC */
mb();
asm volatile("mtdec %0" : : "r" (0x7fffffff));
/* We can now disable MSR_EE */
local_irq_save(flags);
/* Giveup the FPU & vec */
enable_kernel_fp();
#ifdef CONFIG_ALTIVEC
if (cpu_has_feature(CPU_FTR_ALTIVEC))
enable_kernel_altivec();
#endif /* CONFIG_ALTIVEC */
/* Save & disable L2 and L3 caches */
save_l3cr = _get_L3CR(); /* (returns -1 if not available) */
save_l2cr = _get_L2CR(); /* (returns -1 if not available) */
/* Send the new speed command. My assumption is that this command
* will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep
*/
pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed);
while (!req.complete)
pmu_poll();
/* Prepare the northbridge for the speed transition */
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1);
/* Call low level code to backup CPU state and recover from
* hardware reset
*/
low_sleep_handler();
/* Restore the northbridge */
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0);
/* Restore L2 cache */
if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
_set_L2CR(save_l2cr);
/* Restore L3 cache */
if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
_set_L3CR(save_l3cr);
/* Restore userland MMU context */
switch_mmu_context(NULL, current->active_mm, NULL);
#ifdef DEBUG_FREQ
printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
#endif
/* Restore low level PMU operations */
pmu_unlock();
/*
* Restore decrementer; we'll take a decrementer interrupt
* as soon as interrupts are re-enabled and the generic
* clockevents code will reprogram it with the right value.
*/
set_dec(1);
/* Restore interrupts */
mpic_cpu_set_priority(pic_prio);
/* Let interrupts flow again ... */
local_irq_restore(flags);
#ifdef DEBUG_FREQ
debug_calc_bogomips();
#endif
pmu_resume();
preempt_enable();
return 0;
}
static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode)
{
unsigned long l3cr;
static unsigned long prev_l3cr;
if (speed_mode == CPUFREQ_LOW &&
cpu_has_feature(CPU_FTR_L3CR)) {
l3cr = _get_L3CR();
if (l3cr & L3CR_L3E) {
prev_l3cr = l3cr;
_set_L3CR(0);
}
}
set_speed_proc(speed_mode == CPUFREQ_LOW);
if (speed_mode == CPUFREQ_HIGH &&
cpu_has_feature(CPU_FTR_L3CR)) {
l3cr = _get_L3CR();
if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
_set_L3CR(prev_l3cr);
}
cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
return 0;
}
static unsigned int pmac_cpufreq_get_speed(unsigned int cpu)
{
return cur_freq;
}
static int pmac_cpufreq_target( struct cpufreq_policy *policy,
unsigned int index)
{
int rc;
rc = do_set_cpu_speed(policy, index);
ppc_proc_freq = cur_freq * 1000ul;
return rc;
}
static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
return cpufreq_generic_init(policy, pmac_cpu_freqs, transition_latency);
}
static u32 read_gpio(struct device_node *np)
{
const u32 *reg = of_get_property(np, "reg", NULL);
u32 offset;
if (reg == NULL)
return 0;
/* That works for all keylargos but shall be fixed properly
* some day... The problem is that it seems we can't rely
* on the "reg" property of the GPIO nodes, they are either
* relative to the base of KeyLargo or to the base of the
* GPIO space, and the device-tree doesn't help.
*/
offset = *reg;
if (offset < KEYLARGO_GPIO_LEVELS0)
offset += KEYLARGO_GPIO_LEVELS0;
return offset;
}
static int pmac_cpufreq_suspend(struct cpufreq_policy *policy)
{
/* Ok, this could be made a bit smarter, but let's be robust for now. We
* always force a speed change to high speed before sleep, to make sure
* we have appropriate voltage and/or bus speed for the wakeup process,
* and to make sure our loops_per_jiffies are "good enough", that is will
* not cause too short delays if we sleep in low speed and wake in high
* speed..
*/
no_schedule = 1;
sleep_freq = cur_freq;
if (cur_freq == low_freq && !is_pmu_based)
do_set_cpu_speed(policy, CPUFREQ_HIGH);
return 0;
}
static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
{
/* If we resume, first check if we have a get() function */
if (get_speed_proc)
cur_freq = get_speed_proc();
else
cur_freq = 0;
/* We don't, hrm... we don't really know our speed here, best
* is that we force a switch to whatever it was, which is
* probably high speed due to our suspend() routine
*/
do_set_cpu_speed(policy, sleep_freq == low_freq ?
CPUFREQ_LOW : CPUFREQ_HIGH);
ppc_proc_freq = cur_freq * 1000ul;
no_schedule = 0;
return 0;
}
static struct cpufreq_driver pmac_cpufreq_driver = {
.verify = cpufreq_generic_frequency_table_verify,
.target_index = pmac_cpufreq_target,
.get = pmac_cpufreq_get_speed,
.init = pmac_cpufreq_cpu_init,
.suspend = pmac_cpufreq_suspend,
.resume = pmac_cpufreq_resume,
.flags = CPUFREQ_PM_NO_WARN,
.attr = cpufreq_generic_attr,
.name = "powermac",
};
static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
{
struct device_node *volt_gpio_np = of_find_node_by_name(NULL,
"voltage-gpio");
struct device_node *freq_gpio_np = of_find_node_by_name(NULL,
"frequency-gpio");
struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
"slewing-done");
const u32 *value;
/*
* Check to see if it's GPIO driven or PMU only
*
* The way we extract the GPIO address is slightly hackish, but it
* works well enough for now. We need to abstract the whole GPIO
* stuff sooner or later anyway
*/
if (volt_gpio_np)
voltage_gpio = read_gpio(volt_gpio_np);
if (freq_gpio_np)
frequency_gpio = read_gpio(freq_gpio_np);
if (slew_done_gpio_np)
slew_done_gpio = read_gpio(slew_done_gpio_np);
/* If we use the frequency GPIOs, calculate the min/max speeds based
* on the bus frequencies
*/
if (frequency_gpio && slew_done_gpio) {
int lenp, rc;
const u32 *freqs, *ratio;
freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
lenp /= sizeof(u32);
if (freqs == NULL || lenp != 2) {
pr_err("bus-frequencies incorrect or missing\n");
return 1;
}
ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
NULL);
if (ratio == NULL) {
pr_err("processor-to-bus-ratio*2 missing\n");
return 1;
}
/* Get the min/max bus frequencies */
low_freq = min(freqs[0], freqs[1]);
hi_freq = max(freqs[0], freqs[1]);
/* Grrrr.. It _seems_ that the device-tree is lying on the low bus
* frequency, it claims it to be around 84Mhz on some models while
* it appears to be approx. 101Mhz on all. Let's hack around here...
* fortunately, we don't need to be too precise
*/
if (low_freq < 98000000)
low_freq = 101000000;
/* Convert those to CPU core clocks */
low_freq = (low_freq * (*ratio)) / 2000;
hi_freq = (hi_freq * (*ratio)) / 2000;
/* Now we get the frequencies, we read the GPIO to see what is out current
* speed
*/
rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
cur_freq = (rc & 0x01) ? hi_freq : low_freq;
set_speed_proc = gpios_set_cpu_speed;
return 1;
}
/* If we use the PMU, look for the min & max frequencies in the
* device-tree
*/
value = of_get_property(cpunode, "min-clock-frequency", NULL);
if (!value)
return 1;
low_freq = (*value) / 1000;
/* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree
* here */
if (low_freq < 100000)
low_freq *= 10;
value = of_get_property(cpunode, "max-clock-frequency", NULL);
if (!value)
return 1;
hi_freq = (*value) / 1000;
set_speed_proc = pmu_set_cpu_speed;
is_pmu_based = 1;
return 0;
}
static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
{
struct device_node *volt_gpio_np;
if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
return 1;
volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
if (volt_gpio_np)
voltage_gpio = read_gpio(volt_gpio_np);
if (!voltage_gpio){
pr_err("missing cpu-vcore-select gpio\n");
return 1;
}
/* OF only reports the high frequency */
hi_freq = cur_freq;
low_freq = cur_freq/2;
/* Read actual frequency from CPU */
cur_freq = dfs_get_cpu_speed();
set_speed_proc = dfs_set_cpu_speed;
get_speed_proc = dfs_get_cpu_speed;
return 0;
}
static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
{
struct device_node *volt_gpio_np;
u32 pvr;
const u32 *value;
if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
return 1;
hi_freq = cur_freq;
value = of_get_property(cpunode, "reduced-clock-frequency", NULL);
if (!value)
return 1;
low_freq = (*value) / 1000;
volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
if (volt_gpio_np)
voltage_gpio = read_gpio(volt_gpio_np);
pvr = mfspr(SPRN_PVR);
has_cpu_l2lve = !((pvr & 0xf00) == 0x100);
set_speed_proc = cpu_750fx_cpu_speed;
get_speed_proc = cpu_750fx_get_cpu_speed;
cur_freq = cpu_750fx_get_cpu_speed();
return 0;
}
/* Currently, we support the following machines:
*
* - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz)
* - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz)
* - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz)
* - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz)
* - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz)
* - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage)
* - Recent MacRISC3 laptops
* - All new machines with 7447A CPUs
*/
static int __init pmac_cpufreq_setup(void)
{
struct device_node *cpunode;
const u32 *value;
if (strstr(boot_command_line, "nocpufreq"))
return 0;
/* Get first CPU node */
cpunode = of_cpu_device_node_get(0);
if (!cpunode)
goto out;
/* Get current cpu clock freq */
value = of_get_property(cpunode, "clock-frequency", NULL);
if (!value)
goto out;
cur_freq = (*value) / 1000;
transition_latency = CPUFREQ_ETERNAL;
/* Check for 7447A based MacRISC3 */
if (of_machine_is_compatible("MacRISC3") &&
of_get_property(cpunode, "dynamic-power-step", NULL) &&
PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
pmac_cpufreq_init_7447A(cpunode);
transition_latency = 8000000;
/* Check for other MacRISC3 machines */
} else if (of_machine_is_compatible("PowerBook3,4") ||
of_machine_is_compatible("PowerBook3,5") ||
of_machine_is_compatible("MacRISC3")) {
pmac_cpufreq_init_MacRISC3(cpunode);
/* Else check for iBook2 500/600 */
} else if (of_machine_is_compatible("PowerBook4,1")) {
hi_freq = cur_freq;
low_freq = 400000;
set_speed_proc = pmu_set_cpu_speed;
is_pmu_based = 1;
}
/* Else check for TiPb 550 */
else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
hi_freq = cur_freq;
low_freq = 500000;
set_speed_proc = pmu_set_cpu_speed;
is_pmu_based = 1;
}
/* Else check for TiPb 400 & 500 */
else if (of_machine_is_compatible("PowerBook3,2")) {
/* We only know about the 400 MHz and the 500Mhz model
* they both have 300 MHz as low frequency
*/
if (cur_freq < 350000 || cur_freq > 550000)
goto out;
hi_freq = cur_freq;
low_freq = 300000;
set_speed_proc = pmu_set_cpu_speed;
is_pmu_based = 1;
}
/* Else check for 750FX */
else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)
pmac_cpufreq_init_750FX(cpunode);
out:
of_node_put(cpunode);
if (set_speed_proc == NULL)
return -ENODEV;
pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq;
pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
ppc_proc_freq = cur_freq * 1000ul;
pr_info("Registering PowerMac CPU frequency driver\n");
pr_info("Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
low_freq/1000, hi_freq/1000, cur_freq/1000);
return cpufreq_register_driver(&pmac_cpufreq_driver);
}
module_init(pmac_cpufreq_setup);