linux/drivers/iommu/irq_remapping.c
Thomas Gleixner 8a2b7d142e irq_remapping: Use apic_ack_irq()
To address the EBUSY fail of interrupt affinity settings in case that the
previous setting has not been cleaned up yet, use the new apic_ack_irq()
function instead of the special ir_ack_apic_edge() implementation which is
merily a wrapper around ack_APIC_irq().

Preparatory change for the real fix

Fixes: dccfe3147b ("x86/vector: Simplify vector move cleanup")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Song Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.555716895@linutronix.de
2018-06-06 15:18:20 +02:00

193 lines
4.2 KiB
C

#include <linux/seq_file.h>
#include <linux/cpumask.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/msi.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/irqdomain.h>
#include <asm/hw_irq.h>
#include <asm/irq_remapping.h>
#include <asm/processor.h>
#include <asm/x86_init.h>
#include <asm/apic.h>
#include <asm/hpet.h>
#include "irq_remapping.h"
int irq_remapping_enabled;
int irq_remap_broken;
int disable_sourceid_checking;
int no_x2apic_optout;
int disable_irq_post = 0;
static int disable_irq_remap;
static struct irq_remap_ops *remap_ops;
static void irq_remapping_restore_boot_irq_mode(void)
{
/*
* With interrupt-remapping, for now we will use virtual wire A
* mode, as virtual wire B is little complex (need to configure
* both IOAPIC RTE as well as interrupt-remapping table entry).
* As this gets called during crash dump, keep this simple for
* now.
*/
if (boot_cpu_has(X86_FEATURE_APIC) || apic_from_smp_config())
disconnect_bsp_APIC(0);
}
static void __init irq_remapping_modify_x86_ops(void)
{
x86_apic_ops.restore = irq_remapping_restore_boot_irq_mode;
}
static __init int setup_nointremap(char *str)
{
disable_irq_remap = 1;
return 0;
}
early_param("nointremap", setup_nointremap);
static __init int setup_irqremap(char *str)
{
if (!str)
return -EINVAL;
while (*str) {
if (!strncmp(str, "on", 2)) {
disable_irq_remap = 0;
disable_irq_post = 0;
} else if (!strncmp(str, "off", 3)) {
disable_irq_remap = 1;
disable_irq_post = 1;
} else if (!strncmp(str, "nosid", 5))
disable_sourceid_checking = 1;
else if (!strncmp(str, "no_x2apic_optout", 16))
no_x2apic_optout = 1;
else if (!strncmp(str, "nopost", 6))
disable_irq_post = 1;
str += strcspn(str, ",");
while (*str == ',')
str++;
}
return 0;
}
early_param("intremap", setup_irqremap);
void set_irq_remapping_broken(void)
{
irq_remap_broken = 1;
}
bool irq_remapping_cap(enum irq_remap_cap cap)
{
if (!remap_ops || disable_irq_post)
return false;
return (remap_ops->capability & (1 << cap));
}
EXPORT_SYMBOL_GPL(irq_remapping_cap);
int __init irq_remapping_prepare(void)
{
if (disable_irq_remap)
return -ENOSYS;
if (intel_irq_remap_ops.prepare() == 0)
remap_ops = &intel_irq_remap_ops;
else if (IS_ENABLED(CONFIG_AMD_IOMMU) &&
amd_iommu_irq_ops.prepare() == 0)
remap_ops = &amd_iommu_irq_ops;
else
return -ENOSYS;
return 0;
}
int __init irq_remapping_enable(void)
{
int ret;
if (!remap_ops->enable)
return -ENODEV;
ret = remap_ops->enable();
if (irq_remapping_enabled)
irq_remapping_modify_x86_ops();
return ret;
}
void irq_remapping_disable(void)
{
if (irq_remapping_enabled && remap_ops->disable)
remap_ops->disable();
}
int irq_remapping_reenable(int mode)
{
if (irq_remapping_enabled && remap_ops->reenable)
return remap_ops->reenable(mode);
return 0;
}
int __init irq_remap_enable_fault_handling(void)
{
if (!irq_remapping_enabled)
return 0;
if (!remap_ops->enable_faulting)
return -ENODEV;
return remap_ops->enable_faulting();
}
void panic_if_irq_remap(const char *msg)
{
if (irq_remapping_enabled)
panic(msg);
}
/**
* irq_remapping_get_ir_irq_domain - Get the irqdomain associated with the IOMMU
* device serving request @info
* @info: interrupt allocation information, used to identify the IOMMU device
*
* It's used to get parent irqdomain for HPET and IOAPIC irqdomains.
* Returns pointer to IRQ domain, or NULL on failure.
*/
struct irq_domain *
irq_remapping_get_ir_irq_domain(struct irq_alloc_info *info)
{
if (!remap_ops || !remap_ops->get_ir_irq_domain)
return NULL;
return remap_ops->get_ir_irq_domain(info);
}
/**
* irq_remapping_get_irq_domain - Get the irqdomain serving the request @info
* @info: interrupt allocation information, used to identify the IOMMU device
*
* There will be one PCI MSI/MSIX irqdomain associated with each interrupt
* remapping device, so this interface is used to retrieve the PCI MSI/MSIX
* irqdomain serving request @info.
* Returns pointer to IRQ domain, or NULL on failure.
*/
struct irq_domain *
irq_remapping_get_irq_domain(struct irq_alloc_info *info)
{
if (!remap_ops || !remap_ops->get_irq_domain)
return NULL;
return remap_ops->get_irq_domain(info);
}