linux/arch/arm/mm/context.c
Will Deacon ae3790b8a9 ARM: 7502/1: contextidr: avoid using bfi instruction during notifier
The bfi instruction is not available on ARMv6, so instead use an and/orr
sequence in the contextidr_notifier. This gets rid of the assembler
error:

  Assembler messages:
  Error: selected processor does not support ARM mode `bfi r3,r2,#0,#8'

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-25 09:15:57 +01:00

208 lines
4.7 KiB
C

/*
* linux/arch/arm/mm/context.c
*
* Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/percpu.h>
#include <asm/mmu_context.h>
#include <asm/thread_notify.h>
#include <asm/tlbflush.h>
static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
unsigned int cpu_last_asid = ASID_FIRST_VERSION;
#ifdef CONFIG_ARM_LPAE
void cpu_set_reserved_ttbr0(void)
{
unsigned long ttbl = __pa(swapper_pg_dir);
unsigned long ttbh = 0;
/*
* Set TTBR0 to swapper_pg_dir which contains only global entries. The
* ASID is set to 0.
*/
asm volatile(
" mcrr p15, 0, %0, %1, c2 @ set TTBR0\n"
:
: "r" (ttbl), "r" (ttbh));
isb();
}
#else
void cpu_set_reserved_ttbr0(void)
{
u32 ttb;
/* Copy TTBR1 into TTBR0 */
asm volatile(
" mrc p15, 0, %0, c2, c0, 1 @ read TTBR1\n"
" mcr p15, 0, %0, c2, c0, 0 @ set TTBR0\n"
: "=r" (ttb));
isb();
}
#endif
#ifdef CONFIG_PID_IN_CONTEXTIDR
static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd,
void *t)
{
u32 contextidr;
pid_t pid;
struct thread_info *thread = t;
if (cmd != THREAD_NOTIFY_SWITCH)
return NOTIFY_DONE;
pid = task_pid_nr(thread->task) << ASID_BITS;
asm volatile(
" mrc p15, 0, %0, c13, c0, 1\n"
" and %0, %0, %2\n"
" orr %0, %0, %1\n"
" mcr p15, 0, %0, c13, c0, 1\n"
: "=r" (contextidr), "+r" (pid)
: "I" (~ASID_MASK));
isb();
return NOTIFY_OK;
}
static struct notifier_block contextidr_notifier_block = {
.notifier_call = contextidr_notifier,
};
static int __init contextidr_notifier_init(void)
{
return thread_register_notifier(&contextidr_notifier_block);
}
arch_initcall(contextidr_notifier_init);
#endif
/*
* We fork()ed a process, and we need a new context for the child
* to run in.
*/
void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
mm->context.id = 0;
raw_spin_lock_init(&mm->context.id_lock);
}
static void flush_context(void)
{
cpu_set_reserved_ttbr0();
local_flush_tlb_all();
if (icache_is_vivt_asid_tagged()) {
__flush_icache_all();
dsb();
}
}
#ifdef CONFIG_SMP
static void set_mm_context(struct mm_struct *mm, unsigned int asid)
{
unsigned long flags;
/*
* Locking needed for multi-threaded applications where the
* same mm->context.id could be set from different CPUs during
* the broadcast. This function is also called via IPI so the
* mm->context.id_lock has to be IRQ-safe.
*/
raw_spin_lock_irqsave(&mm->context.id_lock, flags);
if (likely((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) {
/*
* Old version of ASID found. Set the new one and
* reset mm_cpumask(mm).
*/
mm->context.id = asid;
cpumask_clear(mm_cpumask(mm));
}
raw_spin_unlock_irqrestore(&mm->context.id_lock, flags);
/*
* Set the mm_cpumask(mm) bit for the current CPU.
*/
cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
}
/*
* Reset the ASID on the current CPU. This function call is broadcast
* from the CPU handling the ASID rollover and holding cpu_asid_lock.
*/
static void reset_context(void *info)
{
unsigned int asid;
unsigned int cpu = smp_processor_id();
struct mm_struct *mm = current->active_mm;
smp_rmb();
asid = cpu_last_asid + cpu + 1;
flush_context();
set_mm_context(mm, asid);
/* set the new ASID */
cpu_switch_mm(mm->pgd, mm);
}
#else
static inline void set_mm_context(struct mm_struct *mm, unsigned int asid)
{
mm->context.id = asid;
cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id()));
}
#endif
void __new_context(struct mm_struct *mm)
{
unsigned int asid;
raw_spin_lock(&cpu_asid_lock);
#ifdef CONFIG_SMP
/*
* Check the ASID again, in case the change was broadcast from
* another CPU before we acquired the lock.
*/
if (unlikely(((mm->context.id ^ cpu_last_asid) >> ASID_BITS) == 0)) {
cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
raw_spin_unlock(&cpu_asid_lock);
return;
}
#endif
/*
* At this point, it is guaranteed that the current mm (with
* an old ASID) isn't active on any other CPU since the ASIDs
* are changed simultaneously via IPI.
*/
asid = ++cpu_last_asid;
if (asid == 0)
asid = cpu_last_asid = ASID_FIRST_VERSION;
/*
* If we've used up all our ASIDs, we need
* to start a new version and flush the TLB.
*/
if (unlikely((asid & ~ASID_MASK) == 0)) {
asid = cpu_last_asid + smp_processor_id() + 1;
flush_context();
#ifdef CONFIG_SMP
smp_wmb();
smp_call_function(reset_context, NULL, 1);
#endif
cpu_last_asid += NR_CPUS;
}
set_mm_context(mm, asid);
raw_spin_unlock(&cpu_asid_lock);
}