linux/arch/arm/mach-u300/dummyspichip.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

292 lines
8.7 KiB
C

/*
* arch/arm/mach-u300/dummyspichip.c
*
* Copyright (C) 2007-2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* This is a dummy loopback SPI "chip" used for testing SPI.
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/sysfs.h>
#include <linux/mutex.h>
#include <linux/spi/spi.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
/*
* WARNING! Do not include this pl022-specific controller header
* for any generic driver. It is only done in this dummy chip
* because we alter the chip configuration in order to test some
* different settings on the loopback device. Normal chip configs
* shall be STATIC and not altered by the driver!
*/
#include <linux/amba/pl022.h>
struct dummy {
struct device *dev;
struct mutex lock;
};
#define DMA_TEST_SIZE 2048
/* When we cat /sys/bus/spi/devices/spi0.0/looptest this will be triggered */
static ssize_t dummy_looptest(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct spi_device *spi = to_spi_device(dev);
struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
/*
* WARNING! Do not dereference the chip-specific data in any normal
* driver for a chip. It is usually STATIC and shall not be read
* or written to. Your chip driver should NOT depend on fields in this
* struct, this is just used here to alter the behaviour of the chip
* in order to perform tests.
*/
struct pl022_config_chip *chip_info = spi->controller_data;
int status;
u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD,
0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05,
0xF0, 0x0D};
u8 rxbuf[14];
u8 *bigtxbuf_virtual;
u8 *bigrxbuf_virtual;
if (mutex_lock_interruptible(&p_dummy->lock))
return -ERESTARTSYS;
bigtxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
if (bigtxbuf_virtual == NULL) {
status = -ENOMEM;
goto out;
}
bigrxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
/* Fill TXBUF with some happy pattern */
memset(bigtxbuf_virtual, 0xAA, DMA_TEST_SIZE);
/*
* Force chip to 8 bit mode
* WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
*/
chip_info->data_size = SSP_DATA_BITS_8;
/* You should NOT DO THIS EITHER */
spi->master->setup(spi);
/* Now run the tests for 8bit mode */
pr_info("Simple test 1: write 0xAA byte, read back garbage byte "
"in 8bit mode\n");
status = spi_w8r8(spi, 0xAA);
if (status < 0)
pr_warning("Siple test 1: FAILURE: spi_write_then_read "
"failed with status %d\n", status);
else
pr_info("Simple test 1: SUCCESS!\n");
pr_info("Simple test 2: write 8 bytes, read back 8 bytes garbage "
"in 8bit mode (full FIFO)\n");
status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
if (status < 0)
pr_warning("Simple test 2: FAILURE: spi_write_then_read() "
"failed with status %d\n", status);
else
pr_info("Simple test 2: SUCCESS!\n");
pr_info("Simple test 3: write 14 bytes, read back 14 bytes garbage "
"in 8bit mode (see if we overflow FIFO)\n");
status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
if (status < 0)
pr_warning("Simple test 3: FAILURE: failed with status %d "
"(probably FIFO overrun)\n", status);
else
pr_info("Simple test 3: SUCCESS!\n");
pr_info("Simple test 4: write 8 bytes with spi_write(), read 8 "
"bytes garbage with spi_read() in 8bit mode\n");
status = spi_write(spi, &txbuf[0], 8);
if (status < 0)
pr_warning("Simple test 4 step 1: FAILURE: spi_write() "
"failed with status %d\n", status);
else
pr_info("Simple test 4 step 1: SUCCESS!\n");
status = spi_read(spi, &rxbuf[0], 8);
if (status < 0)
pr_warning("Simple test 4 step 2: FAILURE: spi_read() "
"failed with status %d\n", status);
else
pr_info("Simple test 4 step 2: SUCCESS!\n");
pr_info("Simple test 5: write 14 bytes with spi_write(), read "
"14 bytes garbage with spi_read() in 8bit mode\n");
status = spi_write(spi, &txbuf[0], 14);
if (status < 0)
pr_warning("Simple test 5 step 1: FAILURE: spi_write() "
"failed with status %d (probably FIFO overrun)\n",
status);
else
pr_info("Simple test 5 step 1: SUCCESS!\n");
status = spi_read(spi, &rxbuf[0], 14);
if (status < 0)
pr_warning("Simple test 5 step 2: FAILURE: spi_read() "
"failed with status %d (probably FIFO overrun)\n",
status);
else
pr_info("Simple test 5: SUCCESS!\n");
pr_info("Simple test 6: write %d bytes with spi_write(), "
"read %d bytes garbage with spi_read() in 8bit mode\n",
DMA_TEST_SIZE, DMA_TEST_SIZE);
status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
if (status < 0)
pr_warning("Simple test 6 step 1: FAILURE: spi_write() "
"failed with status %d (probably FIFO overrun)\n",
status);
else
pr_info("Simple test 6 step 1: SUCCESS!\n");
status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
if (status < 0)
pr_warning("Simple test 6 step 2: FAILURE: spi_read() "
"failed with status %d (probably FIFO overrun)\n",
status);
else
pr_info("Simple test 6: SUCCESS!\n");
/*
* Force chip to 16 bit mode
* WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
*/
chip_info->data_size = SSP_DATA_BITS_16;
/* You should NOT DO THIS EITHER */
spi->master->setup(spi);
pr_info("Simple test 7: write 0xAA byte, read back garbage byte "
"in 16bit bus mode\n");
status = spi_w8r8(spi, 0xAA);
if (status == -EIO)
pr_info("Simple test 7: SUCCESS! (expected failure with "
"status EIO)\n");
else if (status < 0)
pr_warning("Siple test 7: FAILURE: spi_write_then_read "
"failed with status %d\n", status);
else
pr_warning("Siple test 7: FAILURE: spi_write_then_read "
"succeeded but it was expected to fail!\n");
pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
"in 16bit mode (full FIFO)\n");
status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
if (status < 0)
pr_warning("Simple test 8: FAILURE: spi_write_then_read() "
"failed with status %d\n", status);
else
pr_info("Simple test 8: SUCCESS!\n");
pr_info("Simple test 9: write 14 bytes, read back 14 bytes garbage "
"in 16bit mode (see if we overflow FIFO)\n");
status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
if (status < 0)
pr_warning("Simple test 9: FAILURE: failed with status %d "
"(probably FIFO overrun)\n", status);
else
pr_info("Simple test 9: SUCCESS!\n");
pr_info("Simple test 10: write %d bytes with spi_write(), "
"read %d bytes garbage with spi_read() in 16bit mode\n",
DMA_TEST_SIZE, DMA_TEST_SIZE);
status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
if (status < 0)
pr_warning("Simple test 10 step 1: FAILURE: spi_write() "
"failed with status %d (probably FIFO overrun)\n",
status);
else
pr_info("Simple test 10 step 1: SUCCESS!\n");
status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
if (status < 0)
pr_warning("Simple test 10 step 2: FAILURE: spi_read() "
"failed with status %d (probably FIFO overrun)\n",
status);
else
pr_info("Simple test 10: SUCCESS!\n");
status = sprintf(buf, "loop test complete\n");
kfree(bigrxbuf_virtual);
kfree(bigtxbuf_virtual);
out:
mutex_unlock(&p_dummy->lock);
return status;
}
static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL);
static int __devinit pl022_dummy_probe(struct spi_device *spi)
{
struct dummy *p_dummy;
int status;
dev_info(&spi->dev, "probing dummy SPI device\n");
p_dummy = kzalloc(sizeof *p_dummy, GFP_KERNEL);
if (!p_dummy)
return -ENOMEM;
dev_set_drvdata(&spi->dev, p_dummy);
mutex_init(&p_dummy->lock);
/* sysfs hook */
status = device_create_file(&spi->dev, &dev_attr_looptest);
if (status) {
dev_dbg(&spi->dev, "device_create_file looptest failure.\n");
goto out_dev_create_looptest_failed;
}
return 0;
out_dev_create_looptest_failed:
dev_set_drvdata(&spi->dev, NULL);
kfree(p_dummy);
return status;
}
static int __devexit pl022_dummy_remove(struct spi_device *spi)
{
struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
dev_info(&spi->dev, "removing dummy SPI device\n");
device_remove_file(&spi->dev, &dev_attr_looptest);
dev_set_drvdata(&spi->dev, NULL);
kfree(p_dummy);
return 0;
}
static struct spi_driver pl022_dummy_driver = {
.driver = {
.name = "spi-dummy",
.owner = THIS_MODULE,
},
.probe = pl022_dummy_probe,
.remove = __devexit_p(pl022_dummy_remove),
};
static int __init pl022_init_dummy(void)
{
return spi_register_driver(&pl022_dummy_driver);
}
static void __exit pl022_exit_dummy(void)
{
spi_unregister_driver(&pl022_dummy_driver);
}
module_init(pl022_init_dummy);
module_exit(pl022_exit_dummy);
MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver");
MODULE_LICENSE("GPL");