linux/drivers/net/wireless/iwlwifi/Kconfig
John W. Linville 133d7c6a50 wireless: remove WLAN_80211 and WLAN_PRE80211 from Kconfig
With the WLAN_PRE80211 drivers moved to drivers/staging, this
distinction becomes unnecessary.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30 16:50:35 -04:00

129 lines
4.2 KiB
Plaintext

config IWLWIFI
tristate "Intel Wireless Wifi"
depends on PCI && MAC80211 && EXPERIMENTAL
select FW_LOADER
config IWLWIFI_SPECTRUM_MEASUREMENT
bool "Enable Spectrum Measurement in iwlagn driver"
depends on IWLWIFI
---help---
This option will enable spectrum measurement for the iwlagn driver.
config IWLWIFI_DEBUG
bool "Enable full debugging output in iwlagn and iwl3945 drivers"
depends on IWLWIFI
---help---
This option will enable debug tracing output for the iwlwifi drivers
This will result in the kernel module being ~100k larger. You can
control which debug output is sent to the kernel log by setting the
value in
/sys/class/net/wlan0/device/debug_level
This entry will only exist if this option is enabled.
To set a value, simply echo an 8-byte hex value to the same file:
% echo 0x43fff > /sys/class/net/wlan0/device/debug_level
You can find the list of debug mask values in:
drivers/net/wireless/iwlwifi/iwl-debug.h
If this is your first time using this driver, you should say Y here
as the debug information can assist others in helping you resolve
any problems you may encounter.
config IWLWIFI_DEBUGFS
bool "iwlagn debugfs support"
depends on IWLWIFI && IWLWIFI_DEBUG && MAC80211_DEBUGFS
---help---
Enable creation of debugfs files for the iwlwifi drivers.
config IWLWIFI_DEVICE_TRACING
bool "iwlwifi device access tracing"
depends on IWLWIFI
depends on EVENT_TRACING
help
Say Y here to trace all commands, including TX frames and IO
accesses, sent to the device. If you say yes, iwlwifi will
register with the ftrace framework for event tracing and dump
all this information to the ringbuffer, you may need to
increase the ringbuffer size. See the ftrace documentation
for more information.
When tracing is not enabled, this option still has some
(though rather small) overhead.
If unsure, say Y so we can help you better when problems
occur.
config IWLAGN
tristate "Intel Wireless WiFi Next Gen AGN (iwlagn)"
depends on IWLWIFI
---help---
Select to build the driver supporting the:
Intel Wireless WiFi Link Next-Gen AGN
This driver uses the kernel's mac80211 subsystem.
In order to use this driver, you will need a microcode (uCode)
image for it. You can obtain the microcode from:
<http://intellinuxwireless.org/>.
The microcode is typically installed in /lib/firmware. You can
look in the hotplug script /etc/hotplug/firmware.agent to
determine which directory FIRMWARE_DIR is set to when the script
runs.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
module will be called iwlagn.
config IWL4965
bool "Intel Wireless WiFi 4965AGN"
depends on IWLAGN
---help---
This option enables support for Intel Wireless WiFi Link 4965AGN
config IWL5000
bool "Intel Wireless WiFi 5000AGN; Intel WiFi Link 1000, 6000, and 6050 Series"
depends on IWLAGN
---help---
This option enables support for Intel Wireless WiFi Link 5000AGN Family
config IWL3945
tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
depends on IWLWIFI
---help---
Select to build the driver supporting the:
Intel PRO/Wireless 3945ABG/BG Network Connection
This driver uses the kernel's mac80211 subsystem.
In order to use this driver, you will need a microcode (uCode)
image for it. You can obtain the microcode from:
<http://intellinuxwireless.org/>.
The microcode is typically installed in /lib/firmware. You can
look in the hotplug script /etc/hotplug/firmware.agent to
determine which directory FIRMWARE_DIR is set to when the script
runs.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
module will be called iwl3945.
config IWL3945_SPECTRUM_MEASUREMENT
bool "Enable Spectrum Measurement in iwl3945 driver"
depends on IWL3945
---help---
This option will enable spectrum measurement for the iwl3945 driver.