linux/arch/arm/boot/dts/omap2.dtsi
Suman Anna 4fe5bd5da2 ARM: dts: OMAP2: Fix interrupts for OMAP2420 mailbox
The mailbox module is capable of generating two interrupts
to MPU in OMAP2420, compared to one in OMAP2430. The second
interrupt is to handle interrupts from the additional IVA
processor present only on OMAP2420.

Move the current common mailbox DT node into the SoC
specific files to allow the above differentiation. Also,
added back the interrupt-names on OMAP2420, that were
previously defined in hwmod data.

This fixes regression caused by the recent dropping of
hwmod data in favor for defining it in the .dts files.

Signed-off-by: Suman Anna <s-anna@ti.com>
[tony@atomide.com: updated description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-25 09:53:43 -07:00

300 lines
6.1 KiB
Plaintext

/*
* Device Tree Source for OMAP2 SoC
*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/omap.h>
#include "skeleton.dtsi"
/ {
compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
interrupt-parent = <&intc>;
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
i2c0 = &i2c1;
i2c1 = &i2c2;
};
cpus {
#address-cells = <0>;
#size-cells = <0>;
cpu {
compatible = "arm,arm1136jf-s";
device_type = "cpu";
};
};
pmu {
compatible = "arm,arm1136-pmu";
interrupts = <3>;
};
soc {
compatible = "ti,omap-infra";
mpu {
compatible = "ti,omap2-mpu";
ti,hwmods = "mpu";
};
};
ocp {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ti,hwmods = "l3_main";
aes: aes@480a6000 {
compatible = "ti,omap2-aes";
ti,hwmods = "aes";
reg = <0x480a6000 0x50>;
dmas = <&sdma 9 &sdma 10>;
dma-names = "tx", "rx";
};
hdq1w: 1w@480b2000 {
compatible = "ti,omap2420-1w";
ti,hwmods = "hdq1w";
reg = <0x480b2000 0x1000>;
interrupts = <58>;
};
intc: interrupt-controller@1 {
compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
ti,intc-size = <96>;
reg = <0x480FE000 0x1000>;
};
sdma: dma-controller@48056000 {
compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
ti,hwmods = "dma";
reg = <0x48056000 0x1000>;
interrupts = <12>,
<13>,
<14>,
<15>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <64>;
};
i2c1: i2c@48070000 {
compatible = "ti,omap2-i2c";
ti,hwmods = "i2c1";
reg = <0x48070000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <56>;
dmas = <&sdma 27 &sdma 28>;
dma-names = "tx", "rx";
};
i2c2: i2c@48072000 {
compatible = "ti,omap2-i2c";
ti,hwmods = "i2c2";
reg = <0x48072000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <57>;
dmas = <&sdma 29 &sdma 30>;
dma-names = "tx", "rx";
};
mcspi1: mcspi@48098000 {
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi1";
reg = <0x48098000 0x100>;
interrupts = <65>;
dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
&sdma 39 &sdma 40 &sdma 41 &sdma 42>;
dma-names = "tx0", "rx0", "tx1", "rx1",
"tx2", "rx2", "tx3", "rx3";
};
mcspi2: mcspi@4809a000 {
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi2";
reg = <0x4809a000 0x100>;
interrupts = <66>;
dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
dma-names = "tx0", "rx0", "tx1", "rx1";
};
rng: rng@480a0000 {
compatible = "ti,omap2-rng";
ti,hwmods = "rng";
reg = <0x480a0000 0x50>;
interrupts = <52>;
};
sham: sham@480a4000 {
compatible = "ti,omap2-sham";
ti,hwmods = "sham";
reg = <0x480a4000 0x64>;
interrupts = <51>;
dmas = <&sdma 13>;
dma-names = "rx";
};
uart1: serial@4806a000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart1";
reg = <0x4806a000 0x2000>;
interrupts = <72>;
dmas = <&sdma 49 &sdma 50>;
dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
uart2: serial@4806c000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart2";
reg = <0x4806c000 0x400>;
interrupts = <73>;
dmas = <&sdma 51 &sdma 52>;
dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
uart3: serial@4806e000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart3";
reg = <0x4806e000 0x400>;
interrupts = <74>;
dmas = <&sdma 53 &sdma 54>;
dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
timer2: timer@4802a000 {
compatible = "ti,omap2420-timer";
reg = <0x4802a000 0x400>;
interrupts = <38>;
ti,hwmods = "timer2";
};
timer3: timer@48078000 {
compatible = "ti,omap2420-timer";
reg = <0x48078000 0x400>;
interrupts = <39>;
ti,hwmods = "timer3";
};
timer4: timer@4807a000 {
compatible = "ti,omap2420-timer";
reg = <0x4807a000 0x400>;
interrupts = <40>;
ti,hwmods = "timer4";
};
timer5: timer@4807c000 {
compatible = "ti,omap2420-timer";
reg = <0x4807c000 0x400>;
interrupts = <41>;
ti,hwmods = "timer5";
ti,timer-dsp;
};
timer6: timer@4807e000 {
compatible = "ti,omap2420-timer";
reg = <0x4807e000 0x400>;
interrupts = <42>;
ti,hwmods = "timer6";
ti,timer-dsp;
};
timer7: timer@48080000 {
compatible = "ti,omap2420-timer";
reg = <0x48080000 0x400>;
interrupts = <43>;
ti,hwmods = "timer7";
ti,timer-dsp;
};
timer8: timer@48082000 {
compatible = "ti,omap2420-timer";
reg = <0x48082000 0x400>;
interrupts = <44>;
ti,hwmods = "timer8";
ti,timer-dsp;
};
timer9: timer@48084000 {
compatible = "ti,omap2420-timer";
reg = <0x48084000 0x400>;
interrupts = <45>;
ti,hwmods = "timer9";
ti,timer-pwm;
};
timer10: timer@48086000 {
compatible = "ti,omap2420-timer";
reg = <0x48086000 0x400>;
interrupts = <46>;
ti,hwmods = "timer10";
ti,timer-pwm;
};
timer11: timer@48088000 {
compatible = "ti,omap2420-timer";
reg = <0x48088000 0x400>;
interrupts = <47>;
ti,hwmods = "timer11";
ti,timer-pwm;
};
timer12: timer@4808a000 {
compatible = "ti,omap2420-timer";
reg = <0x4808a000 0x400>;
interrupts = <48>;
ti,hwmods = "timer12";
ti,timer-pwm;
};
dss: dss@48050000 {
compatible = "ti,omap2-dss";
reg = <0x48050000 0x400>;
status = "disabled";
ti,hwmods = "dss_core";
#address-cells = <1>;
#size-cells = <1>;
ranges;
dispc@48050400 {
compatible = "ti,omap2-dispc";
reg = <0x48050400 0x400>;
interrupts = <25>;
ti,hwmods = "dss_dispc";
};
rfbi: encoder@48050800 {
compatible = "ti,omap2-rfbi";
reg = <0x48050800 0x400>;
status = "disabled";
ti,hwmods = "dss_rfbi";
};
venc: encoder@48050c00 {
compatible = "ti,omap2-venc";
reg = <0x48050c00 0x400>;
status = "disabled";
ti,hwmods = "dss_venc";
};
};
};
};