linux/drivers/usb/gadget/f_sourcesink.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

537 lines
14 KiB
C

/*
* f_sourcesink.c - USB peripheral source/sink configuration driver
*
* Copyright (C) 2003-2008 David Brownell
* Copyright (C) 2008 by Nokia Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* #define VERBOSE_DEBUG */
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include "g_zero.h"
#include "gadget_chips.h"
/*
* SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripheral
* controller drivers.
*
* This just sinks bulk packets OUT to the peripheral and sources them IN
* to the host, optionally with specific data patterns for integrity tests.
* As such it supports basic functionality and load tests.
*
* In terms of control messaging, this supports all the standard requests
* plus two that support control-OUT tests. If the optional "autoresume"
* mode is enabled, it provides good functional coverage for the "USBCV"
* test harness from USB-IF.
*
* Note that because this doesn't queue more than one request at a time,
* some other function must be used to test queueing logic. The network
* link (g_ether) is the best overall option for that, since its TX and RX
* queues are relatively independent, will receive a range of packet sizes,
* and can often be made to run out completely. Those issues are important
* when stress testing peripheral controller drivers.
*
*
* This is currently packaged as a configuration driver, which can't be
* combined with other functions to make composite devices. However, it
* can be combined with other independent configurations.
*/
struct f_sourcesink {
struct usb_function function;
struct usb_ep *in_ep;
struct usb_ep *out_ep;
};
static inline struct f_sourcesink *func_to_ss(struct usb_function *f)
{
return container_of(f, struct f_sourcesink, function);
}
static unsigned pattern;
module_param(pattern, uint, 0);
MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63 ");
/*-------------------------------------------------------------------------*/
static struct usb_interface_descriptor source_sink_intf = {
.bLength = sizeof source_sink_intf,
.bDescriptorType = USB_DT_INTERFACE,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
/* .iInterface = DYNAMIC */
};
/* full speed support: */
static struct usb_endpoint_descriptor fs_source_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
static struct usb_endpoint_descriptor fs_sink_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
static struct usb_descriptor_header *fs_source_sink_descs[] = {
(struct usb_descriptor_header *) &source_sink_intf,
(struct usb_descriptor_header *) &fs_sink_desc,
(struct usb_descriptor_header *) &fs_source_desc,
NULL,
};
/* high speed support: */
static struct usb_endpoint_descriptor hs_source_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = cpu_to_le16(512),
};
static struct usb_endpoint_descriptor hs_sink_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = cpu_to_le16(512),
};
static struct usb_descriptor_header *hs_source_sink_descs[] = {
(struct usb_descriptor_header *) &source_sink_intf,
(struct usb_descriptor_header *) &hs_source_desc,
(struct usb_descriptor_header *) &hs_sink_desc,
NULL,
};
/* function-specific strings: */
static struct usb_string strings_sourcesink[] = {
[0].s = "source and sink data",
{ } /* end of list */
};
static struct usb_gadget_strings stringtab_sourcesink = {
.language = 0x0409, /* en-us */
.strings = strings_sourcesink,
};
static struct usb_gadget_strings *sourcesink_strings[] = {
&stringtab_sourcesink,
NULL,
};
/*-------------------------------------------------------------------------*/
static int __init
sourcesink_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_sourcesink *ss = func_to_ss(f);
int id;
/* allocate interface ID(s) */
id = usb_interface_id(c, f);
if (id < 0)
return id;
source_sink_intf.bInterfaceNumber = id;
/* allocate endpoints */
ss->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_source_desc);
if (!ss->in_ep) {
autoconf_fail:
ERROR(cdev, "%s: can't autoconfigure on %s\n",
f->name, cdev->gadget->name);
return -ENODEV;
}
ss->in_ep->driver_data = cdev; /* claim */
ss->out_ep = usb_ep_autoconfig(cdev->gadget, &fs_sink_desc);
if (!ss->out_ep)
goto autoconf_fail;
ss->out_ep->driver_data = cdev; /* claim */
/* support high speed hardware */
if (gadget_is_dualspeed(c->cdev->gadget)) {
hs_source_desc.bEndpointAddress =
fs_source_desc.bEndpointAddress;
hs_sink_desc.bEndpointAddress =
fs_sink_desc.bEndpointAddress;
f->hs_descriptors = hs_source_sink_descs;
}
DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
f->name, ss->in_ep->name, ss->out_ep->name);
return 0;
}
static void
sourcesink_unbind(struct usb_configuration *c, struct usb_function *f)
{
kfree(func_to_ss(f));
}
/* optionally require specific source/sink data patterns */
static int check_read_data(struct f_sourcesink *ss, struct usb_request *req)
{
unsigned i;
u8 *buf = req->buf;
struct usb_composite_dev *cdev = ss->function.config->cdev;
for (i = 0; i < req->actual; i++, buf++) {
switch (pattern) {
/* all-zeroes has no synchronization issues */
case 0:
if (*buf == 0)
continue;
break;
/* "mod63" stays in sync with short-terminated transfers,
* OR otherwise when host and gadget agree on how large
* each usb transfer request should be. Resync is done
* with set_interface or set_config. (We *WANT* it to
* get quickly out of sync if controllers or their drivers
* stutter for any reason, including buffer duplcation...)
*/
case 1:
if (*buf == (u8)(i % 63))
continue;
break;
}
ERROR(cdev, "bad OUT byte, buf[%d] = %d\n", i, *buf);
usb_ep_set_halt(ss->out_ep);
return -EINVAL;
}
return 0;
}
static void reinit_write_data(struct usb_ep *ep, struct usb_request *req)
{
unsigned i;
u8 *buf = req->buf;
switch (pattern) {
case 0:
memset(req->buf, 0, req->length);
break;
case 1:
for (i = 0; i < req->length; i++)
*buf++ = (u8) (i % 63);
break;
}
}
static void source_sink_complete(struct usb_ep *ep, struct usb_request *req)
{
struct f_sourcesink *ss = ep->driver_data;
struct usb_composite_dev *cdev = ss->function.config->cdev;
int status = req->status;
switch (status) {
case 0: /* normal completion? */
if (ep == ss->out_ep) {
check_read_data(ss, req);
memset(req->buf, 0x55, req->length);
} else
reinit_write_data(ep, req);
break;
/* this endpoint is normally active while we're configured */
case -ECONNABORTED: /* hardware forced ep reset */
case -ECONNRESET: /* request dequeued */
case -ESHUTDOWN: /* disconnect from host */
VDBG(cdev, "%s gone (%d), %d/%d\n", ep->name, status,
req->actual, req->length);
if (ep == ss->out_ep)
check_read_data(ss, req);
free_ep_req(ep, req);
return;
case -EOVERFLOW: /* buffer overrun on read means that
* we didn't provide a big enough
* buffer.
*/
default:
#if 1
DBG(cdev, "%s complete --> %d, %d/%d\n", ep->name,
status, req->actual, req->length);
#endif
case -EREMOTEIO: /* short read */
break;
}
status = usb_ep_queue(ep, req, GFP_ATOMIC);
if (status) {
ERROR(cdev, "kill %s: resubmit %d bytes --> %d\n",
ep->name, req->length, status);
usb_ep_set_halt(ep);
/* FIXME recover later ... somehow */
}
}
static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in)
{
struct usb_ep *ep;
struct usb_request *req;
int status;
ep = is_in ? ss->in_ep : ss->out_ep;
req = alloc_ep_req(ep);
if (!req)
return -ENOMEM;
req->complete = source_sink_complete;
if (is_in)
reinit_write_data(ep, req);
else
memset(req->buf, 0x55, req->length);
status = usb_ep_queue(ep, req, GFP_ATOMIC);
if (status) {
struct usb_composite_dev *cdev;
cdev = ss->function.config->cdev;
ERROR(cdev, "start %s %s --> %d\n",
is_in ? "IN" : "OUT",
ep->name, status);
free_ep_req(ep, req);
}
return status;
}
static void disable_source_sink(struct f_sourcesink *ss)
{
struct usb_composite_dev *cdev;
cdev = ss->function.config->cdev;
disable_endpoints(cdev, ss->in_ep, ss->out_ep);
VDBG(cdev, "%s disabled\n", ss->function.name);
}
static int
enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss)
{
int result = 0;
const struct usb_endpoint_descriptor *src, *sink;
struct usb_ep *ep;
src = ep_choose(cdev->gadget, &hs_source_desc, &fs_source_desc);
sink = ep_choose(cdev->gadget, &hs_sink_desc, &fs_sink_desc);
/* one endpoint writes (sources) zeroes IN (to the host) */
ep = ss->in_ep;
result = usb_ep_enable(ep, src);
if (result < 0)
return result;
ep->driver_data = ss;
result = source_sink_start_ep(ss, true);
if (result < 0) {
fail:
ep = ss->in_ep;
usb_ep_disable(ep);
ep->driver_data = NULL;
return result;
}
/* one endpoint reads (sinks) anything OUT (from the host) */
ep = ss->out_ep;
result = usb_ep_enable(ep, sink);
if (result < 0)
goto fail;
ep->driver_data = ss;
result = source_sink_start_ep(ss, false);
if (result < 0) {
usb_ep_disable(ep);
ep->driver_data = NULL;
goto fail;
}
DBG(cdev, "%s enabled\n", ss->function.name);
return result;
}
static int sourcesink_set_alt(struct usb_function *f,
unsigned intf, unsigned alt)
{
struct f_sourcesink *ss = func_to_ss(f);
struct usb_composite_dev *cdev = f->config->cdev;
/* we know alt is zero */
if (ss->in_ep->driver_data)
disable_source_sink(ss);
return enable_source_sink(cdev, ss);
}
static void sourcesink_disable(struct usb_function *f)
{
struct f_sourcesink *ss = func_to_ss(f);
disable_source_sink(ss);
}
/*-------------------------------------------------------------------------*/
static int __init sourcesink_bind_config(struct usb_configuration *c)
{
struct f_sourcesink *ss;
int status;
ss = kzalloc(sizeof *ss, GFP_KERNEL);
if (!ss)
return -ENOMEM;
ss->function.name = "source/sink";
ss->function.descriptors = fs_source_sink_descs;
ss->function.bind = sourcesink_bind;
ss->function.unbind = sourcesink_unbind;
ss->function.set_alt = sourcesink_set_alt;
ss->function.disable = sourcesink_disable;
status = usb_add_function(c, &ss->function);
if (status)
kfree(ss);
return status;
}
static int sourcesink_setup(struct usb_configuration *c,
const struct usb_ctrlrequest *ctrl)
{
struct usb_request *req = c->cdev->req;
int value = -EOPNOTSUPP;
u16 w_index = le16_to_cpu(ctrl->wIndex);
u16 w_value = le16_to_cpu(ctrl->wValue);
u16 w_length = le16_to_cpu(ctrl->wLength);
/* composite driver infrastructure handles everything except
* the two control test requests.
*/
switch (ctrl->bRequest) {
/*
* These are the same vendor-specific requests supported by
* Intel's USB 2.0 compliance test devices. We exceed that
* device spec by allowing multiple-packet requests.
*
* NOTE: the Control-OUT data stays in req->buf ... better
* would be copying it into a scratch buffer, so that other
* requests may safely intervene.
*/
case 0x5b: /* control WRITE test -- fill the buffer */
if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
goto unknown;
if (w_value || w_index)
break;
/* just read that many bytes into the buffer */
if (w_length > req->length)
break;
value = w_length;
break;
case 0x5c: /* control READ test -- return the buffer */
if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
goto unknown;
if (w_value || w_index)
break;
/* expect those bytes are still in the buffer; send back */
if (w_length > req->length)
break;
value = w_length;
break;
default:
unknown:
VDBG(c->cdev,
"unknown control req%02x.%02x v%04x i%04x l%d\n",
ctrl->bRequestType, ctrl->bRequest,
w_value, w_index, w_length);
}
/* respond with data transfer or status phase? */
if (value >= 0) {
VDBG(c->cdev, "source/sink req%02x.%02x v%04x i%04x l%d\n",
ctrl->bRequestType, ctrl->bRequest,
w_value, w_index, w_length);
req->zero = 0;
req->length = value;
value = usb_ep_queue(c->cdev->gadget->ep0, req, GFP_ATOMIC);
if (value < 0)
ERROR(c->cdev, "source/sinkc response, err %d\n",
value);
}
/* device either stalls (value < 0) or reports success */
return value;
}
static struct usb_configuration sourcesink_driver = {
.label = "source/sink",
.strings = sourcesink_strings,
.bind = sourcesink_bind_config,
.setup = sourcesink_setup,
.bConfigurationValue = 3,
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
/* .iConfiguration = DYNAMIC */
};
/**
* sourcesink_add - add a source/sink testing configuration to a device
* @cdev: the device to support the configuration
*/
int __init sourcesink_add(struct usb_composite_dev *cdev, bool autoresume)
{
int id;
/* allocate string ID(s) */
id = usb_string_id(cdev);
if (id < 0)
return id;
strings_sourcesink[0].id = id;
source_sink_intf.iInterface = id;
sourcesink_driver.iConfiguration = id;
/* support autoresume for remote wakeup testing */
if (autoresume)
sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
/* support OTG systems */
if (gadget_is_otg(cdev->gadget)) {
sourcesink_driver.descriptors = otg_desc;
sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
return usb_add_config(cdev, &sourcesink_driver);
}