linux/drivers/usb/chipidea/ci_hdrc_imx.c
Li Jun 6adb9b7b5f usb: chipidea: add a flag for turn on vbus early for host
Some usb PHYs need power supply from vbus to make it work, eg mxs-phy, if
there is no vbus, USB PHY will not in correct state when the controller starts
to work, for host, this requires vbus should be turned on before setting port
power(PP) of ehci, to work with this kind of USB PHY design, this patch adds
a flag CI_HDRC_TURN_VBUS_EARLY_ON, can be checked by host driver to turn on
vbus while start host.

Signed-off-by: Li Jun <jun.li@freescale.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18 16:19:12 +01:00

363 lines
8.4 KiB
C

/*
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright (C) 2012 Marek Vasut <marex@denx.de>
* on behalf of DENX Software Engineering GmbH
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/dma-mapping.h>
#include <linux/usb/chipidea.h>
#include <linux/clk.h>
#include "ci.h"
#include "ci_hdrc_imx.h"
struct ci_hdrc_imx_platform_flag {
unsigned int flags;
bool runtime_pm;
};
static const struct ci_hdrc_imx_platform_flag imx27_usb_data = {
};
static const struct ci_hdrc_imx_platform_flag imx28_usb_data = {
.flags = CI_HDRC_IMX28_WRITE_FIX |
CI_HDRC_TURN_VBUS_EARLY_ON,
};
static const struct ci_hdrc_imx_platform_flag imx6q_usb_data = {
.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
CI_HDRC_TURN_VBUS_EARLY_ON,
};
static const struct ci_hdrc_imx_platform_flag imx6sl_usb_data = {
.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
CI_HDRC_TURN_VBUS_EARLY_ON,
};
static const struct ci_hdrc_imx_platform_flag imx6sx_usb_data = {
.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
CI_HDRC_TURN_VBUS_EARLY_ON,
};
static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
{ .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data},
{ .compatible = "fsl,imx6sl-usb", .data = &imx6sl_usb_data},
{ .compatible = "fsl,imx6sx-usb", .data = &imx6sl_usb_data},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
struct ci_hdrc_imx_data {
struct usb_phy *phy;
struct platform_device *ci_pdev;
struct clk *clk;
struct imx_usbmisc_data *usbmisc_data;
bool supports_runtime_pm;
bool in_lpm;
};
/* Common functions shared by usbmisc drivers */
static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
{
struct platform_device *misc_pdev;
struct device_node *np = dev->of_node;
struct of_phandle_args args;
struct imx_usbmisc_data *data;
int ret;
/*
* In case the fsl,usbmisc property is not present this device doesn't
* need usbmisc. Return NULL (which is no error here)
*/
if (!of_get_property(np, "fsl,usbmisc", NULL))
return NULL;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return ERR_PTR(-ENOMEM);
ret = of_parse_phandle_with_args(np, "fsl,usbmisc", "#index-cells",
0, &args);
if (ret) {
dev_err(dev, "Failed to parse property fsl,usbmisc, errno %d\n",
ret);
return ERR_PTR(ret);
}
data->index = args.args[0];
misc_pdev = of_find_device_by_node(args.np);
of_node_put(args.np);
if (!misc_pdev)
return ERR_PTR(-EPROBE_DEFER);
data->dev = &misc_pdev->dev;
if (of_find_property(np, "disable-over-current", NULL))
data->disable_oc = 1;
if (of_find_property(np, "external-vbus-divider", NULL))
data->evdo = 1;
return data;
}
/* End of common functions shared by usbmisc drivers*/
static int ci_hdrc_imx_probe(struct platform_device *pdev)
{
struct ci_hdrc_imx_data *data;
struct ci_hdrc_platform_data pdata = {
.name = dev_name(&pdev->dev),
.capoffset = DEF_CAPOFFSET,
.flags = CI_HDRC_DISABLE_STREAMING,
};
int ret;
const struct of_device_id *of_id =
of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev);
const struct ci_hdrc_imx_platform_flag *imx_platform_flag = of_id->data;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->usbmisc_data = usbmisc_get_init_data(&pdev->dev);
if (IS_ERR(data->usbmisc_data))
return PTR_ERR(data->usbmisc_data);
data->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(data->clk)) {
dev_err(&pdev->dev,
"Failed to get clock, err=%ld\n", PTR_ERR(data->clk));
return PTR_ERR(data->clk);
}
ret = clk_prepare_enable(data->clk);
if (ret) {
dev_err(&pdev->dev,
"Failed to prepare or enable clock, err=%d\n", ret);
return ret;
}
data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0);
if (IS_ERR(data->phy)) {
ret = PTR_ERR(data->phy);
/* Return -EINVAL if no usbphy is available */
if (ret == -ENODEV)
ret = -EINVAL;
goto err_clk;
}
pdata.usb_phy = data->phy;
pdata.flags |= imx_platform_flag->flags;
if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM)
data->supports_runtime_pm = true;
ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (ret)
goto err_clk;
ret = imx_usbmisc_init(data->usbmisc_data);
if (ret) {
dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n", ret);
goto err_clk;
}
data->ci_pdev = ci_hdrc_add_device(&pdev->dev,
pdev->resource, pdev->num_resources,
&pdata);
if (IS_ERR(data->ci_pdev)) {
ret = PTR_ERR(data->ci_pdev);
dev_err(&pdev->dev,
"Can't register ci_hdrc platform device, err=%d\n",
ret);
goto err_clk;
}
ret = imx_usbmisc_init_post(data->usbmisc_data);
if (ret) {
dev_err(&pdev->dev, "usbmisc post failed, ret=%d\n", ret);
goto disable_device;
}
platform_set_drvdata(pdev, data);
if (data->supports_runtime_pm) {
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
}
device_set_wakeup_capable(&pdev->dev, true);
return 0;
disable_device:
ci_hdrc_remove_device(data->ci_pdev);
err_clk:
clk_disable_unprepare(data->clk);
return ret;
}
static int ci_hdrc_imx_remove(struct platform_device *pdev)
{
struct ci_hdrc_imx_data *data = platform_get_drvdata(pdev);
if (data->supports_runtime_pm) {
pm_runtime_get_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
}
ci_hdrc_remove_device(data->ci_pdev);
clk_disable_unprepare(data->clk);
return 0;
}
#ifdef CONFIG_PM
static int imx_controller_suspend(struct device *dev)
{
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
dev_dbg(dev, "at %s\n", __func__);
clk_disable_unprepare(data->clk);
data->in_lpm = true;
return 0;
}
static int imx_controller_resume(struct device *dev)
{
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
int ret = 0;
dev_dbg(dev, "at %s\n", __func__);
if (!data->in_lpm) {
WARN_ON(1);
return 0;
}
ret = clk_prepare_enable(data->clk);
if (ret)
return ret;
data->in_lpm = false;
ret = imx_usbmisc_set_wakeup(data->usbmisc_data, false);
if (ret) {
dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", ret);
goto clk_disable;
}
return 0;
clk_disable:
clk_disable_unprepare(data->clk);
return ret;
}
#ifdef CONFIG_PM_SLEEP
static int ci_hdrc_imx_suspend(struct device *dev)
{
int ret;
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
if (data->in_lpm)
/* The core's suspend doesn't run */
return 0;
if (device_may_wakeup(dev)) {
ret = imx_usbmisc_set_wakeup(data->usbmisc_data, true);
if (ret) {
dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n",
ret);
return ret;
}
}
return imx_controller_suspend(dev);
}
static int ci_hdrc_imx_resume(struct device *dev)
{
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
int ret;
ret = imx_controller_resume(dev);
if (!ret && data->supports_runtime_pm) {
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
}
return ret;
}
#endif /* CONFIG_PM_SLEEP */
static int ci_hdrc_imx_runtime_suspend(struct device *dev)
{
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
int ret;
if (data->in_lpm) {
WARN_ON(1);
return 0;
}
ret = imx_usbmisc_set_wakeup(data->usbmisc_data, true);
if (ret) {
dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", ret);
return ret;
}
return imx_controller_suspend(dev);
}
static int ci_hdrc_imx_runtime_resume(struct device *dev)
{
return imx_controller_resume(dev);
}
#endif /* CONFIG_PM */
static const struct dev_pm_ops ci_hdrc_imx_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(ci_hdrc_imx_suspend, ci_hdrc_imx_resume)
SET_RUNTIME_PM_OPS(ci_hdrc_imx_runtime_suspend,
ci_hdrc_imx_runtime_resume, NULL)
};
static struct platform_driver ci_hdrc_imx_driver = {
.probe = ci_hdrc_imx_probe,
.remove = ci_hdrc_imx_remove,
.driver = {
.name = "imx_usb",
.of_match_table = ci_hdrc_imx_dt_ids,
.pm = &ci_hdrc_imx_pm_ops,
},
};
module_platform_driver(ci_hdrc_imx_driver);
MODULE_ALIAS("platform:imx-usb");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("CI HDRC i.MX USB binding");
MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");