linux/drivers/dma/Kconfig
Guennadi Liakhovetski 5296b56d1b i.MX31: Image Processing Unit DMA and IRQ drivers
i.MX3x SoCs contain an Image Processing Unit, consisting of a Control
Module (CM), Display Interface (DI), Synchronous Display Controller (SDC),
Asynchronous Display Controller (ADC), Image Converter (IC), Post-Filter
(PF), Camera Sensor Interface (CSI), and an Image DMA Controller (IDMAC).
CM contains, among other blocks, an Interrupt Generator (IG) and a Clock
and Reset Control Unit (CRCU). This driver serves IDMAC and IG. They are
supported over dmaengine and irq-chip APIs respectively.

IDMAC is a specialised DMA controller, its DMA channels cannot be used for
general-purpose operations, even though it might be possible to configure
a memory-to-memory channel for memcpy operation. This driver will not work
with generic dmaengine clients, clients, wishing to use it must use
respective wrapper structures, they also must specify which channels they
require, as channels are hard-wired to specific IPU functions.

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-19 15:36:21 -07:00

109 lines
2.7 KiB
Plaintext

#
# DMA engine configuration
#
menuconfig DMADEVICES
bool "DMA Engine support"
depends on !HIGHMEM64G && HAS_DMA
help
DMA engines can do asynchronous data transfers without
involving the host CPU. Currently, this framework can be
used to offload memory copies in the network stack and
RAID operations in the MD driver. This menu only presents
DMA Device drivers supported by the configured arch, it may
be empty in some cases.
if DMADEVICES
comment "DMA Devices"
config INTEL_IOATDMA
tristate "Intel I/OAT DMA support"
depends on PCI && X86
select DMA_ENGINE
select DCA
help
Enable support for the Intel(R) I/OAT DMA engine present
in recent Intel Xeon chipsets.
Say Y here if you have such a chipset.
If unsure, say N.
config INTEL_IOP_ADMA
tristate "Intel IOP ADMA support"
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX
select DMA_ENGINE
help
Enable support for the Intel(R) IOP Series RAID engines.
config DW_DMAC
tristate "Synopsys DesignWare AHB DMA support"
depends on AVR32
select DMA_ENGINE
default y if CPU_AT32AP7000
help
Support the Synopsys DesignWare AHB DMA controller. This
can be integrated in chips such as the Atmel AT32ap7000.
config FSL_DMA
tristate "Freescale Elo and Elo Plus DMA support"
depends on FSL_SOC
select DMA_ENGINE
---help---
Enable support for the Freescale Elo and Elo Plus DMA controllers.
The Elo is the DMA controller on some 82xx and 83xx parts, and the
Elo Plus is the DMA controller on 85xx and 86xx parts.
config MV_XOR
bool "Marvell XOR engine support"
depends on PLAT_ORION
select DMA_ENGINE
---help---
Enable support for the Marvell XOR engine.
config MX3_IPU
bool "MX3x Image Processing Unit support"
depends on ARCH_MX3
select DMA_ENGINE
default y
help
If you plan to use the Image Processing unit in the i.MX3x, say
Y here. If unsure, select Y.
config MX3_IPU_IRQS
int "Number of dynamically mapped interrupts for IPU"
depends on MX3_IPU
range 2 137
default 4
help
Out of 137 interrupt sources on i.MX31 IPU only very few are used.
To avoid bloating the irq_desc[] array we allocate a sufficient
number of IRQ slots and map them dynamically to specific sources.
config DMA_ENGINE
bool
comment "DMA Clients"
depends on DMA_ENGINE
config NET_DMA
bool "Network: TCP receive copy offload"
depends on DMA_ENGINE && NET
default (INTEL_IOATDMA || FSL_DMA)
help
This enables the use of DMA engines in the network stack to
offload receive copy-to-user operations, freeing CPU cycles.
Say Y here if you enabled INTEL_IOATDMA or FSL_DMA, otherwise
say N.
config DMATEST
tristate "DMA Test client"
depends on DMA_ENGINE
help
Simple DMA test client. Say N unless you're debugging a
DMA Device driver.
endif