mirror of
https://github.com/torvalds/linux
synced 2024-10-22 19:25:51 +00:00
a8e5177583
This patch (as1095) cleans up the HCD glue and several of the EHCI bus-glue files. The ehci->is_tdi_rh_tt flag is redundant, since it means the same thing as the hcd->has_tt flag, so it is removed and the other flag used in its place. Some of the bus-glue files didn't get the relinquish_port method added to their hc_driver structures. Although that routine currently doesn't do anything for controllers with an integrated TT, in the future it might. So the patch adds it where it is missing. Lastly, some of the bus-glue files have erroneous entries for their hc_driver's suspend and resume methods. These method pointers are specific to PCI and shouldn't be used otherwise. (The patch also includes an invisible whitespace fix.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net>
351 lines
8.9 KiB
C
351 lines
8.9 KiB
C
/*
|
|
* Copyright (c) 2005 MontaVista Software
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
|
|
* by Hunter Wu.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/fsl_devices.h>
|
|
|
|
#include "ehci-fsl.h"
|
|
|
|
/* FIXME: Power Management is un-ported so temporarily disable it */
|
|
#undef CONFIG_PM
|
|
|
|
|
|
/* configure so an HC device and id are always provided */
|
|
/* always called with process context; sleeping is OK */
|
|
|
|
/**
|
|
* usb_hcd_fsl_probe - initialize FSL-based HCDs
|
|
* @drvier: Driver to be used for this HCD
|
|
* @pdev: USB Host Controller being probed
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Allocates basic resources for this USB host controller.
|
|
*
|
|
*/
|
|
int usb_hcd_fsl_probe(const struct hc_driver *driver,
|
|
struct platform_device *pdev)
|
|
{
|
|
struct fsl_usb2_platform_data *pdata;
|
|
struct usb_hcd *hcd;
|
|
struct resource *res;
|
|
int irq;
|
|
int retval;
|
|
unsigned int temp;
|
|
|
|
pr_debug("initializing FSL-SOC USB Controller\n");
|
|
|
|
/* Need platform data for setup */
|
|
pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev,
|
|
"No platform data for %s.\n", pdev->dev.bus_id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* This is a host mode driver, verify that we're supposed to be
|
|
* in host mode.
|
|
*/
|
|
if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
|
|
(pdata->operating_mode == FSL_USB2_MPH_HOST) ||
|
|
(pdata->operating_mode == FSL_USB2_DR_OTG))) {
|
|
dev_err(&pdev->dev,
|
|
"Non Host Mode configured for %s. Wrong driver linked.\n",
|
|
pdev->dev.bus_id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev,
|
|
"Found HC with no IRQ. Check %s setup!\n",
|
|
pdev->dev.bus_id);
|
|
return -ENODEV;
|
|
}
|
|
irq = res->start;
|
|
|
|
hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id);
|
|
if (!hcd) {
|
|
retval = -ENOMEM;
|
|
goto err1;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev,
|
|
"Found HC with no register addr. Check %s setup!\n",
|
|
pdev->dev.bus_id);
|
|
retval = -ENODEV;
|
|
goto err2;
|
|
}
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = res->end - res->start + 1;
|
|
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
|
|
driver->description)) {
|
|
dev_dbg(&pdev->dev, "controller already in use\n");
|
|
retval = -EBUSY;
|
|
goto err2;
|
|
}
|
|
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
|
|
|
|
if (hcd->regs == NULL) {
|
|
dev_dbg(&pdev->dev, "error mapping memory\n");
|
|
retval = -EFAULT;
|
|
goto err3;
|
|
}
|
|
|
|
/* Enable USB controller */
|
|
temp = in_be32(hcd->regs + 0x500);
|
|
out_be32(hcd->regs + 0x500, temp | 0x4);
|
|
|
|
/* Set to Host mode */
|
|
temp = in_le32(hcd->regs + 0x1a8);
|
|
out_le32(hcd->regs + 0x1a8, temp | 0x3);
|
|
|
|
retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
|
|
if (retval != 0)
|
|
goto err4;
|
|
return retval;
|
|
|
|
err4:
|
|
iounmap(hcd->regs);
|
|
err3:
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
err2:
|
|
usb_put_hcd(hcd);
|
|
err1:
|
|
dev_err(&pdev->dev, "init %s fail, %d\n", pdev->dev.bus_id, retval);
|
|
return retval;
|
|
}
|
|
|
|
/* may be called without controller electrically present */
|
|
/* may be called with controller, bus, and devices active */
|
|
|
|
/**
|
|
* usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
|
|
* @dev: USB Host Controller being removed
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Reverses the effect of usb_hcd_fsl_probe().
|
|
*
|
|
*/
|
|
void usb_hcd_fsl_remove(struct usb_hcd *hcd, struct platform_device *pdev)
|
|
{
|
|
usb_remove_hcd(hcd);
|
|
iounmap(hcd->regs);
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
usb_put_hcd(hcd);
|
|
}
|
|
|
|
static void mpc83xx_setup_phy(struct ehci_hcd *ehci,
|
|
enum fsl_usb2_phy_modes phy_mode,
|
|
unsigned int port_offset)
|
|
{
|
|
u32 portsc = 0;
|
|
switch (phy_mode) {
|
|
case FSL_USB2_PHY_ULPI:
|
|
portsc |= PORT_PTS_ULPI;
|
|
break;
|
|
case FSL_USB2_PHY_SERIAL:
|
|
portsc |= PORT_PTS_SERIAL;
|
|
break;
|
|
case FSL_USB2_PHY_UTMI_WIDE:
|
|
portsc |= PORT_PTS_PTW;
|
|
/* fall through */
|
|
case FSL_USB2_PHY_UTMI:
|
|
portsc |= PORT_PTS_UTMI;
|
|
break;
|
|
case FSL_USB2_PHY_NONE:
|
|
break;
|
|
}
|
|
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
|
|
}
|
|
|
|
static void mpc83xx_usb_setup(struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
struct fsl_usb2_platform_data *pdata;
|
|
void __iomem *non_ehci = hcd->regs;
|
|
u32 temp;
|
|
|
|
pdata =
|
|
(struct fsl_usb2_platform_data *)hcd->self.controller->
|
|
platform_data;
|
|
/* Enable PHY interface in the control reg. */
|
|
temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
|
|
out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | 0x00000004);
|
|
out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b);
|
|
|
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
|
/*
|
|
* Turn on cache snooping hardware, since some PowerPC platforms
|
|
* wholly rely on hardware to deal with cache coherent
|
|
*/
|
|
|
|
/* Setup Snooping for all the 4GB space */
|
|
/* SNOOP1 starts from 0x0, size 2G */
|
|
out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
|
|
/* SNOOP2 starts from 0x80000000, size 2G */
|
|
out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
|
|
#endif
|
|
|
|
if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
|
|
(pdata->operating_mode == FSL_USB2_DR_OTG))
|
|
mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
|
|
|
|
if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
|
|
unsigned int chip, rev, svr;
|
|
|
|
svr = mfspr(SPRN_SVR);
|
|
chip = svr >> 16;
|
|
rev = (svr >> 4) & 0xf;
|
|
|
|
/* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
|
|
if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
|
|
ehci->has_fsl_port_bug = 1;
|
|
|
|
if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
|
|
mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
|
|
if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
|
|
mpc83xx_setup_phy(ehci, pdata->phy_mode, 1);
|
|
}
|
|
|
|
/* put controller in host mode. */
|
|
ehci_writel(ehci, 0x00000003, non_ehci + FSL_SOC_USB_USBMODE);
|
|
out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
|
|
out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
|
|
out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
|
|
}
|
|
|
|
/* called after powerup, by probe or system-pm "wakeup" */
|
|
static int ehci_fsl_reinit(struct ehci_hcd *ehci)
|
|
{
|
|
mpc83xx_usb_setup(ehci_to_hcd(ehci));
|
|
ehci_port_power(ehci, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* called during probe() after chip reset completes */
|
|
static int ehci_fsl_setup(struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
int retval;
|
|
|
|
/* EHCI registers start at offset 0x100 */
|
|
ehci->caps = hcd->regs + 0x100;
|
|
ehci->regs = hcd->regs + 0x100 +
|
|
HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
|
|
dbg_hcs_params(ehci, "reset");
|
|
dbg_hcc_params(ehci, "reset");
|
|
|
|
/* cache this readonly data; minimize chip reads */
|
|
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
|
|
|
|
retval = ehci_halt(ehci);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/* data structure init */
|
|
retval = ehci_init(hcd);
|
|
if (retval)
|
|
return retval;
|
|
|
|
hcd->has_tt = 1;
|
|
|
|
ehci->sbrn = 0x20;
|
|
|
|
ehci_reset(ehci);
|
|
|
|
retval = ehci_fsl_reinit(ehci);
|
|
return retval;
|
|
}
|
|
|
|
static const struct hc_driver ehci_fsl_hc_driver = {
|
|
.description = hcd_name,
|
|
.product_desc = "Freescale On-Chip EHCI Host Controller",
|
|
.hcd_priv_size = sizeof(struct ehci_hcd),
|
|
|
|
/*
|
|
* generic hardware linkage
|
|
*/
|
|
.irq = ehci_irq,
|
|
.flags = HCD_USB2,
|
|
|
|
/*
|
|
* basic lifecycle operations
|
|
*/
|
|
.reset = ehci_fsl_setup,
|
|
.start = ehci_run,
|
|
.stop = ehci_stop,
|
|
.shutdown = ehci_shutdown,
|
|
|
|
/*
|
|
* managing i/o requests and associated device resources
|
|
*/
|
|
.urb_enqueue = ehci_urb_enqueue,
|
|
.urb_dequeue = ehci_urb_dequeue,
|
|
.endpoint_disable = ehci_endpoint_disable,
|
|
|
|
/*
|
|
* scheduling support
|
|
*/
|
|
.get_frame_number = ehci_get_frame,
|
|
|
|
/*
|
|
* root hub support
|
|
*/
|
|
.hub_status_data = ehci_hub_status_data,
|
|
.hub_control = ehci_hub_control,
|
|
.bus_suspend = ehci_bus_suspend,
|
|
.bus_resume = ehci_bus_resume,
|
|
.relinquish_port = ehci_relinquish_port,
|
|
};
|
|
|
|
static int ehci_fsl_drv_probe(struct platform_device *pdev)
|
|
{
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
/* FIXME we only want one one probe() not two */
|
|
return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
|
|
}
|
|
|
|
static int ehci_fsl_drv_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
|
|
/* FIXME we only want one one remove() not two */
|
|
usb_hcd_fsl_remove(hcd, pdev);
|
|
return 0;
|
|
}
|
|
|
|
MODULE_ALIAS("platform:fsl-ehci");
|
|
|
|
static struct platform_driver ehci_fsl_driver = {
|
|
.probe = ehci_fsl_drv_probe,
|
|
.remove = ehci_fsl_drv_remove,
|
|
.shutdown = usb_hcd_platform_shutdown,
|
|
.driver = {
|
|
.name = "fsl-ehci",
|
|
},
|
|
};
|