linux/drivers/clk/clk-si570.c
Uwe Kleine-König ed5c2f5fd1 i2c: Make remove callback return void
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16 12:46:26 +02:00

530 lines
13 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Driver for Silicon Labs Si570/Si571 Programmable XO/VCXO
*
* Copyright (C) 2010, 2011 Ericsson AB.
* Copyright (C) 2011 Guenter Roeck.
* Copyright (C) 2011 - 2021 Xilinx Inc.
*
* Author: Guenter Roeck <guenter.roeck@ericsson.com>
* Sören Brinkmann <soren.brinkmann@xilinx.com>
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/slab.h>
/* Si570 registers */
#define SI570_REG_HS_N1 7
#define SI570_REG_N1_RFREQ0 8
#define SI570_REG_RFREQ1 9
#define SI570_REG_RFREQ2 10
#define SI570_REG_RFREQ3 11
#define SI570_REG_RFREQ4 12
#define SI570_REG_CONTROL 135
#define SI570_REG_FREEZE_DCO 137
#define SI570_DIV_OFFSET_7PPM 6
#define HS_DIV_SHIFT 5
#define HS_DIV_MASK 0xe0
#define HS_DIV_OFFSET 4
#define N1_6_2_MASK 0x1f
#define N1_1_0_MASK 0xc0
#define RFREQ_37_32_MASK 0x3f
#define SI570_MIN_FREQ 10000000L
#define SI570_MAX_FREQ 1417500000L
#define SI598_MAX_FREQ 525000000L
#define FDCO_MIN 4850000000LL
#define FDCO_MAX 5670000000LL
#define SI570_CNTRL_RECALL (1 << 0)
#define SI570_CNTRL_FREEZE_M (1 << 5)
#define SI570_CNTRL_NEWFREQ (1 << 6)
#define SI570_FREEZE_DCO (1 << 4)
/**
* struct clk_si570:
* @hw: Clock hw struct
* @regmap: Device's regmap
* @div_offset: Rgister offset for dividers
* @max_freq: Maximum frequency for this device
* @fxtal: Factory xtal frequency
* @n1: Clock divider N1
* @hs_div: Clock divider HSDIV
* @rfreq: Clock multiplier RFREQ
* @frequency: Current output frequency
* @i2c_client: I2C client pointer
*/
struct clk_si570 {
struct clk_hw hw;
struct regmap *regmap;
unsigned int div_offset;
u64 max_freq;
u64 fxtal;
unsigned int n1;
unsigned int hs_div;
u64 rfreq;
u64 frequency;
struct i2c_client *i2c_client;
};
#define to_clk_si570(_hw) container_of(_hw, struct clk_si570, hw)
enum clk_si570_variant {
si57x,
si59x
};
/**
* si570_get_divs() - Read clock dividers from HW
* @data: Pointer to struct clk_si570
* @rfreq: Fractional multiplier (output)
* @n1: Divider N1 (output)
* @hs_div: Divider HSDIV (output)
* Returns 0 on success, negative errno otherwise.
*
* Retrieve clock dividers and multipliers from the HW.
*/
static int si570_get_divs(struct clk_si570 *data, u64 *rfreq,
unsigned int *n1, unsigned int *hs_div)
{
int err;
u8 reg[6];
u64 tmp;
err = regmap_bulk_read(data->regmap, SI570_REG_HS_N1 + data->div_offset,
reg, ARRAY_SIZE(reg));
if (err)
return err;
*hs_div = ((reg[0] & HS_DIV_MASK) >> HS_DIV_SHIFT) + HS_DIV_OFFSET;
*n1 = ((reg[0] & N1_6_2_MASK) << 2) + ((reg[1] & N1_1_0_MASK) >> 6) + 1;
/* Handle invalid cases */
if (*n1 > 1)
*n1 &= ~1;
tmp = reg[1] & RFREQ_37_32_MASK;
tmp = (tmp << 8) + reg[2];
tmp = (tmp << 8) + reg[3];
tmp = (tmp << 8) + reg[4];
tmp = (tmp << 8) + reg[5];
*rfreq = tmp;
return 0;
}
/**
* si570_get_defaults() - Get default values
* @data: Driver data structure
* @fout: Factory frequency output
* @skip_recall: If true, don't recall NVM into RAM
* Returns 0 on success, negative errno otherwise.
*/
static int si570_get_defaults(struct clk_si570 *data, u64 fout,
bool skip_recall)
{
int err;
u64 fdco;
if (!skip_recall)
regmap_write(data->regmap, SI570_REG_CONTROL,
SI570_CNTRL_RECALL);
err = si570_get_divs(data, &data->rfreq, &data->n1, &data->hs_div);
if (err)
return err;
/*
* Accept optional precision loss to avoid arithmetic overflows.
* Acceptable per Silicon Labs Application Note AN334.
*/
fdco = fout * data->n1 * data->hs_div;
if (fdco >= (1LL << 36))
data->fxtal = div64_u64(fdco << 24, data->rfreq >> 4);
else
data->fxtal = div64_u64(fdco << 28, data->rfreq);
data->frequency = fout;
return 0;
}
/**
* si570_update_rfreq() - Update clock multiplier
* @data: Driver data structure
* Passes on regmap_bulk_write() return value.
*/
static int si570_update_rfreq(struct clk_si570 *data)
{
u8 reg[5];
reg[0] = ((data->n1 - 1) << 6) |
((data->rfreq >> 32) & RFREQ_37_32_MASK);
reg[1] = (data->rfreq >> 24) & 0xff;
reg[2] = (data->rfreq >> 16) & 0xff;
reg[3] = (data->rfreq >> 8) & 0xff;
reg[4] = data->rfreq & 0xff;
return regmap_bulk_write(data->regmap, SI570_REG_N1_RFREQ0 +
data->div_offset, reg, ARRAY_SIZE(reg));
}
/**
* si570_calc_divs() - Caluclate clock dividers
* @frequency: Target frequency
* @data: Driver data structure
* @out_rfreq: RFREG fractional multiplier (output)
* @out_n1: Clock divider N1 (output)
* @out_hs_div: Clock divider HSDIV (output)
* Returns 0 on success, negative errno otherwise.
*
* Calculate the clock dividers (@out_hs_div, @out_n1) and clock multiplier
* (@out_rfreq) for a given target @frequency.
*/
static int si570_calc_divs(unsigned long frequency, struct clk_si570 *data,
u64 *out_rfreq, unsigned int *out_n1, unsigned int *out_hs_div)
{
int i;
unsigned int n1, hs_div;
u64 fdco, best_fdco = ULLONG_MAX;
static const uint8_t si570_hs_div_values[] = { 11, 9, 7, 6, 5, 4 };
for (i = 0; i < ARRAY_SIZE(si570_hs_div_values); i++) {
hs_div = si570_hs_div_values[i];
/* Calculate lowest possible value for n1 */
n1 = div_u64(div_u64(FDCO_MIN, hs_div), frequency);
if (!n1 || (n1 & 1))
n1++;
while (n1 <= 128) {
fdco = (u64)frequency * (u64)hs_div * (u64)n1;
if (fdco > FDCO_MAX)
break;
if (fdco >= FDCO_MIN && fdco < best_fdco) {
*out_n1 = n1;
*out_hs_div = hs_div;
*out_rfreq = div64_u64(fdco << 28, data->fxtal);
best_fdco = fdco;
}
n1 += (n1 == 1 ? 1 : 2);
}
}
if (best_fdco == ULLONG_MAX)
return -EINVAL;
return 0;
}
static unsigned long si570_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
int err;
u64 rfreq, rate;
unsigned int n1, hs_div;
struct clk_si570 *data = to_clk_si570(hw);
err = si570_get_divs(data, &rfreq, &n1, &hs_div);
if (err) {
dev_err(&data->i2c_client->dev, "unable to recalc rate\n");
return data->frequency;
}
rfreq = div_u64(rfreq, hs_div * n1);
rate = (data->fxtal * rfreq) >> 28;
return rate;
}
static long si570_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
int err;
u64 rfreq;
unsigned int n1, hs_div;
struct clk_si570 *data = to_clk_si570(hw);
if (!rate)
return 0;
if (div64_u64(abs(rate - data->frequency) * 10000LL,
data->frequency) < 35) {
rfreq = div64_u64((data->rfreq * rate) +
div64_u64(data->frequency, 2), data->frequency);
n1 = data->n1;
hs_div = data->hs_div;
} else {
err = si570_calc_divs(rate, data, &rfreq, &n1, &hs_div);
if (err) {
dev_err(&data->i2c_client->dev,
"unable to round rate\n");
return 0;
}
}
return rate;
}
/**
* si570_set_frequency() - Adjust output frequency
* @data: Driver data structure
* @frequency: Target frequency
* Returns 0 on success.
*
* Update output frequency for big frequency changes (> 3,500 ppm).
*/
static int si570_set_frequency(struct clk_si570 *data, unsigned long frequency)
{
int err;
err = si570_calc_divs(frequency, data, &data->rfreq, &data->n1,
&data->hs_div);
if (err)
return err;
/*
* The DCO reg should be accessed with a read-modify-write operation
* per AN334
*/
regmap_write(data->regmap, SI570_REG_FREEZE_DCO, SI570_FREEZE_DCO);
regmap_write(data->regmap, SI570_REG_HS_N1 + data->div_offset,
((data->hs_div - HS_DIV_OFFSET) << HS_DIV_SHIFT) |
(((data->n1 - 1) >> 2) & N1_6_2_MASK));
si570_update_rfreq(data);
regmap_write(data->regmap, SI570_REG_FREEZE_DCO, 0);
regmap_write(data->regmap, SI570_REG_CONTROL, SI570_CNTRL_NEWFREQ);
/* Applying a new frequency can take up to 10ms */
usleep_range(10000, 12000);
return 0;
}
/**
* si570_set_frequency_small() - Adjust output frequency
* @data: Driver data structure
* @frequency: Target frequency
* Returns 0 on success.
*
* Update output frequency for small frequency changes (< 3,500 ppm).
*/
static int si570_set_frequency_small(struct clk_si570 *data,
unsigned long frequency)
{
/*
* This is a re-implementation of DIV_ROUND_CLOSEST
* using the div64_u64 function lieu of letting the compiler
* insert EABI calls
*/
data->rfreq = div64_u64((data->rfreq * frequency) +
div_u64(data->frequency, 2), data->frequency);
regmap_write(data->regmap, SI570_REG_CONTROL, SI570_CNTRL_FREEZE_M);
si570_update_rfreq(data);
regmap_write(data->regmap, SI570_REG_CONTROL, 0);
/* Applying a new frequency (small change) can take up to 100us */
usleep_range(100, 200);
return 0;
}
static int si570_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_si570 *data = to_clk_si570(hw);
struct i2c_client *client = data->i2c_client;
int err;
if (rate < SI570_MIN_FREQ || rate > data->max_freq) {
dev_err(&client->dev,
"requested frequency %lu Hz is out of range\n", rate);
return -EINVAL;
}
if (div64_u64(abs(rate - data->frequency) * 10000LL,
data->frequency) < 35)
err = si570_set_frequency_small(data, rate);
else
err = si570_set_frequency(data, rate);
if (err)
return err;
data->frequency = rate;
return 0;
}
static const struct clk_ops si570_clk_ops = {
.recalc_rate = si570_recalc_rate,
.round_rate = si570_round_rate,
.set_rate = si570_set_rate,
};
static bool si570_regmap_is_volatile(struct device *dev, unsigned int reg)
{
switch (reg) {
case SI570_REG_CONTROL:
return true;
default:
return false;
}
}
static bool si570_regmap_is_writeable(struct device *dev, unsigned int reg)
{
switch (reg) {
case SI570_REG_HS_N1 ... (SI570_REG_RFREQ4 + SI570_DIV_OFFSET_7PPM):
case SI570_REG_CONTROL:
case SI570_REG_FREEZE_DCO:
return true;
default:
return false;
}
}
static const struct regmap_config si570_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.cache_type = REGCACHE_RBTREE,
.max_register = 137,
.writeable_reg = si570_regmap_is_writeable,
.volatile_reg = si570_regmap_is_volatile,
};
static const struct i2c_device_id si570_id[] = {
{ "si570", si57x },
{ "si571", si57x },
{ "si598", si59x },
{ "si599", si59x },
{ }
};
MODULE_DEVICE_TABLE(i2c, si570_id);
static int si570_probe(struct i2c_client *client)
{
struct clk_si570 *data;
struct clk_init_data init;
const struct i2c_device_id *id = i2c_match_id(si570_id, client);
u32 initial_fout, factory_fout, stability;
bool skip_recall;
int err;
enum clk_si570_variant variant = id->driver_data;
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
init.ops = &si570_clk_ops;
init.flags = 0;
init.num_parents = 0;
data->hw.init = &init;
data->i2c_client = client;
if (variant == si57x) {
err = of_property_read_u32(client->dev.of_node,
"temperature-stability", &stability);
if (err) {
dev_err(&client->dev,
"'temperature-stability' property missing\n");
return err;
}
/* adjust register offsets for 7ppm devices */
if (stability == 7)
data->div_offset = SI570_DIV_OFFSET_7PPM;
data->max_freq = SI570_MAX_FREQ;
} else {
data->max_freq = SI598_MAX_FREQ;
}
if (of_property_read_string(client->dev.of_node, "clock-output-names",
&init.name))
init.name = client->dev.of_node->name;
err = of_property_read_u32(client->dev.of_node, "factory-fout",
&factory_fout);
if (err) {
dev_err(&client->dev, "'factory-fout' property missing\n");
return err;
}
skip_recall = of_property_read_bool(client->dev.of_node,
"silabs,skip-recall");
data->regmap = devm_regmap_init_i2c(client, &si570_regmap_config);
if (IS_ERR(data->regmap)) {
dev_err(&client->dev, "failed to allocate register map\n");
return PTR_ERR(data->regmap);
}
i2c_set_clientdata(client, data);
err = si570_get_defaults(data, factory_fout, skip_recall);
if (err)
return err;
err = devm_clk_hw_register(&client->dev, &data->hw);
if (err) {
dev_err(&client->dev, "clock registration failed\n");
return err;
}
err = of_clk_add_hw_provider(client->dev.of_node, of_clk_hw_simple_get,
&data->hw);
if (err) {
dev_err(&client->dev, "unable to add clk provider\n");
return err;
}
/* Read the requested initial output frequency from device tree */
if (!of_property_read_u32(client->dev.of_node, "clock-frequency",
&initial_fout)) {
err = clk_set_rate(data->hw.clk, initial_fout);
if (err) {
of_clk_del_provider(client->dev.of_node);
return err;
}
}
/* Display a message indicating that we've successfully registered */
dev_info(&client->dev, "registered, current frequency %llu Hz\n",
data->frequency);
return 0;
}
static void si570_remove(struct i2c_client *client)
{
of_clk_del_provider(client->dev.of_node);
}
static const struct of_device_id clk_si570_of_match[] = {
{ .compatible = "silabs,si570" },
{ .compatible = "silabs,si571" },
{ .compatible = "silabs,si598" },
{ .compatible = "silabs,si599" },
{ },
};
MODULE_DEVICE_TABLE(of, clk_si570_of_match);
static struct i2c_driver si570_driver = {
.driver = {
.name = "si570",
.of_match_table = clk_si570_of_match,
},
.probe_new = si570_probe,
.remove = si570_remove,
.id_table = si570_id,
};
module_i2c_driver(si570_driver);
MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com>");
MODULE_DESCRIPTION("Si570 driver");
MODULE_LICENSE("GPL");